Lexco BHD4-S LED Bulkhead With Microwave Sensor Light User Guide

: September 14, 2024
: Lexco

Table of Contents

Lexco BHD4-S LED Bulkhead With Microwave Sensor Light
Product Usage Instructions
FAQ
Overview
Parts And Tools
Care & maintenance
Installation Instructions
Safety
Technical Data
Guarantee
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lexco BHD4-S LED Bulkhead With Microwave Sensor Light

Product Usage Instructions

Safety Precautions

Do not use it with a dimmer switch.
Do not stare at the operating light source.
Ensure the product is not used with a dimmer switch.
Follow the installation instructions carefully to avoid any risk of electric shock.
Regularly clean the product using a soft, dry cloth.
Do not attempt to replace the light source contained in the luminaire yourself. Contact the manufacturer or a qualified person for replacements.
Read through the instructions thoroughly before handling the product.
Retain the manual for future reference.

FAQ

Q: What is the guarantee period for this product?
A: The product comes with a manufacturer’s guarantee of 7 years against manufacturing defects, from the date of purchase or delivery.
Q: Can I dispose of this product with household waste?
A: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Q: What should I do if I encounter a defect or malfunction?
A: Contact the store you purchased the product from for guarantee-related queries and assistance.

Overview

LED Bulkhead With Microwave Sensor

IMPORTANT – These instructions are for your safety. Please read through them thoroughly before handling the product and retain them for future reference.

Parts And Tools

Parts

You will need

Care & maintenance

Installation Instructions

Centre interconnection

Side interconnection

Max number interconnection

Safety

IMPORTANT Do not use with a dimmer switch.
IMPORTANT, Retain for future reference: read carefully.
These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference.
All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc from the product.
Decide on the appropriate location for your product.
CAUTION: IP65 is guaranteed when the product is properly installed and sealed.
Always refer to the installation drawing for the orientation of the product.
The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.
CAUTION: Ensure the cable is routed so it does not present a hazard (avoid dangling loops where the cable is likely to be pulled/caught).
Wiring diagram is for reference only. Always refer to the terminal marking for wiring. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.
USE ROUND CABLE ONLY.
Ensure the connection is tightened, to create a good water seal.
The round main cable should be at least 6.4 mm in diameter.
Never put anything on the product or hang anything on any part of this product.
Never use the terminal cables to bear the product weight.
The IP rating mentioned on the surround also applies to the front of the assembled product.
This light use microwave motion detection, it may detect occupants through doors, glass windows or thin walls. The range detection can be adjusted by the button (DIP switch).
When the product does not light after installation:
- Ensure there is no electricity failure
- Ensure all the connections are secured
If you have any doubt about installation/use of this product, consult a qualified electrician.
Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.

Technical Data

Supply voltage:	220-240 V~, 50 Hz
Bulb Type:	LED (11/14/17 W)

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

Do not stare at the operating light source.

Frequency range:| 5.8 GHz ± 75 MHz
Transmitter power:| 1 mW Max.
| This product complies with conformity requirements of the applicable European Regulations or Directives.
| This product complies with conformity requirements of the applicable UK Regulations.
Energy efficiency class:| This product contains a light source of energy efficiency class .
Control gear:| Replaceable control gear by a professional.
**| Class II product – Double Insulated – No earth required.
IP65**| Jet-proof

| Waste electrical products should not be disposed of with household waste. Please recycle where

facilities exist. Check with your Local Authority or local store for recycling advice.

---|---
| Caution! Risk of electric shock!
| Do not use with a dimmer switch.
xxWyy:| xx-year; yy-week of the year.

Guarantee

We take special care to select high-quality materials and use manufacturing techniques that allow us to create products incorporating design and durability.
This product has a manufacturer’s guarantee of 7 years against manufacturing defects, from the date of purchase (if bought in-store) or date of delivery (if bought online), at no additional cost for normal use.
To claim this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second-hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original period guarantee period.
This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.
This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labor, etc), or direct and indirect damage.
If the product is defective, we will replace or refund, it within a reasonable time.
Rights under this guarantee are enforceable in the country in which you purchased this product.
Guarantee-related queries should be addressed to the store you purchased this product from.
The guarantee is in addition to and does not affect your statutory rights.