Linksys RE6350 WiFi 5 Range Booster Operational Guide
- June 4, 2024
- Linksys
Table of Contents
Linksys RE6350 WiFi 5 Range Booster
Specifications
- BRAND: Linksys
- MODEL: RE6350
- WIRELESS COMMUNICATION STANDARD: 802.11a
- DATA TRANSFER RATE: 1200 Megabytes Per Second
- COLOR: White
- INCLUDED COMPONENTS: Linksys AC1200 Wi-Fi Range Extender, RE6350 Quick Installation Guide Regulatory Information
- ITEM WEIGHT: 0.28 Grams
- BOOSTS WI-FI RANGE: 1,000 square feet
- DUAL-BAND WI-FI SPEED (2.4 + 5GHZ): N300 + AC867 Mbps
- PRODUCT DIMENSIONS: 2.65 x 5.45 x 6.87 inches
- ITEM WEIGHT: 0.01 ounces
Introduction
By removing Wi-Fi dead zones and boosting the Wi-Fi signal from your current router, the AC1200 Linksys range extender improves the strength and coverage of your home’s Wi-Fi. Push-button connectivity makes setup simple. It Works with any Wi-Fi router or gateways provided by your ISP. Upsize the area covered by Wi-Fi to 7,500 square feet. It increases coverage for ideal HD streaming, gaming, and other activities. You can use spot finder technology on your tablet, laptop, or smartphone to make sure you’ve selected the ideal location for the range extender.
The AC1200 Wi-Fi Range Extender connects into the wall and power strips without obstructing other outlets thanks to its slim profile and small footprint. Its modern design and smooth white finish go well with many different types of decor. Existing 802.11 a/b/g/n/ac wireless routers or access points, Windows or Mac computers or tablets with Wi-Fi, and an electrical outlet are necessities. Internet Explorer 8 or later, Safari 5.1 for Mac, Google Chrome 25.0 or later, and Firefox 20 or later are the minimum requirements for browsers.
Setting up the Linksys RE6350 AC1200 Wi-Fi Range Extender is made fast and easy because of its CD-less setup. Now you can run the setup from a web browser even if your device does not initially have an internet connection and is on factory settings. The steps below will guide you on how to set up your range extender using its browser based setup.
Before you start the setup process, make sure to have the following:
-
An active 2.4 GHz or 5 GHz Wi-Fi® connection
-
Wi-Fi name and password or security Key
-
STEP 1: Plug the Linksys RE6350 into a power outlet and wait for the light indicator to turn orange.
NOTE: Plug the range extender into a power outlet halfway between your router and the dead zone. -
STEP 2: Connect to the range extender’s default Wi-Fi name, Linksys Extender Setup, using a wireless computer or a tablet. Make sure your wireless computer or tablet has a strong Wi-Fi signal from your router.
-
STEP 3: Enter “http://extender.linksys.com” or “192.168.1.1” in a supported browser’s Address bar and press [ENTER] to launch the Setup Wizard.
-
STEP 4: Make sure to read and agree to the End User License Agreement then click Start Setup.
-
STEP 5: When prompted, select your Wi-Fi name.
NOTE: In the example below, Office2016 is used. -
STEP 6: Enter your Network Password or security key then click Next.
-
STEP 7: An _Ext suffix will be automatically added to your Network name. If you would like to personalize the set Network name, Password and Security mode of your range extender’s 2.4 GHz and 5 GHz bands, enter and select them in the fields provided. Otherwise, click on Next.
-
STEP 8: The Spot Finder page will appear. This feature determines the signal strength between your range extender and your router. If your range extender is too close or too far from your router, click the Find better location button and follow the on-screen instructions.
Once you have found the best location for the range extender, click the Back link to proceed with the setup.
-
STEP 9: Create and confirm your admin password. You can also add an optional password hint for easier recovery. Click Save did.
-
STEP 10: Enter your Email Address to register your range extender.
QUICK TIP: To get special offers and updates from Linksys, tick the checkbox before you click Next. If you have already registered your range extender, click Skip to proceed. -
STEP 11: The range extender will go through a firmware checkup. If a new firmware is available, it will proceed with the update. Otherwise, it will proceed to the next step.
-
STEP 12: Connect to the range extender’s Wi-Fi name and once the button labeled Next turns blue, click on it. You should now have successfully set up your Linksys RE6350 AC1200 Wi-Fi Range Extender. You can click the Print button or take note of the settings.
HARDWARE INFORMATION
-
What is the Linksys RE6350 AC1200 Wi-Fi Range Extender? The Linksys RE6350 AC1200 Wi-Fi Range Extender is a dual-band wireless range extender that helps boost your router’s Wi-Fi® range up to 7500 sq. ft. for better coverage and signal strength. To know more, click here.
-
What is included in the Linksys RE6350 package?
The following items are included in the Linksys RE6350 package:- One Linksys RE6350
- Quick Start Guide
- Regulatory Information Booklet
-
What are the parts of the Linksys RE6350?
The Linksys RE6350 has the following parts:- Wi-Fi Protected Setup™ (WPS) button
- Power / WPS light indicator
- Reset button
-
What does the Power / WPS light on the Linksys RE6350 indicate?
| Power Light | Status / Description |
|---|
Blinking Green
| · Starting up
· Resetting to factory defaults
· Upgrading firmware
Solid Green| · Ready to use
Solid Orange
| · Weak connection with the router
Fix: Unplug the range extender, and move it closer to the router.
Blinking Orange
| · Not connected to the router or other error
o Make sure your router has an internet connection and Wi-Fi is turned ON.
o If the router is in order, unplug the range extender, move it closer to the router, plug it back in, wait for one minute, and reconnect to your network.
· WPS pairing failed
-
What is the warranty period of the Linksys RE6350? The warranty period is dependent on the country of purchase. For more information about your device’s warranty, click here.
-
What are the product requirements of my Linksys RE6350?
The product requirements are:- Existing 802.11 a/b/g/n/ac wireless router or access point
- A Windows®, Mac® computer, or tablet with Wi-Fi capability
- AC power outlet
- Browsers:
- Internet Explorer® 8 or higher
- Safari® 5.1 for Mac® or higher
- Google Chrome™ 25.0 or higher
- Firefox® 20 or higher
-
What are the product features of my Linksys RE6350?
Below are the product features of the Linksys RE6350:- 11ac
- Concurrent Dual-Band
- N300 + AC867 Mbps Speeds
- Cross-Band Technology
- Beamforming Technology
- Compact Design
- Easy Setup with Spot Finder
- 2 x 2 Spatial Streams
- Eliminate dead zones and boost coverage
- Wireless Security (WEP, WPA™, WPA2™, and WPA2™ / WPA™ Mixed Mode)
SETUP & INSTALLATION
- How do I set up the Linksys RE6350? Setting up the Linksys RE6350 is made fast and easy because of its CD-less setup. Now you can run the setup from a web browser even if your device does not initially have an internet connection and is on factory settings. Click here to learn how to set up the Linksys RE6350 using the browser based setup.
- Can I set up the Linksys RE6350 using a tablet? Yes.
- What is the default IP address and password used by the Linksys RE6350? If the Linksys RE6350 does not detect a Dynamic Host Configuration Protocol (DHCP) server in your network and has not obtained an IP address from a router, its default IP address is 192.168.1.1 and password is admin.
- How do I set up my Linksys RE6350 using the Wi-Fi Protected Setup™ (WPS)? To learn on how you can set up the range extender using WPS, click here.
- Do I need to install Setup Software on my computer? No.
- How do I reset my Linksys RE6350? To reset the Linksys RE6350 to its factory defaults, press and hold the Reset button for 10 Seconds
TROUBLESHOOTING
-
What should I do if I cannot connect the range extender to the router or access point?
Here are some things you can do:- Make sure you are using the same Wi-Fi name and Wi-Fi password as your existing wireless router or access point.
- For first-time setup, you may need to place the range extender closer to the router. After you’ve set up your range extender, you can unplug it and move it to the final location.
- To reduce signal obstructions, try alternate locations for the router and range extender.
- Avoid placing the router and range extender near metal objects, masonry walls, and reflective surfaces such as glass or mirrors.
- Avoid placing the router and range extender near other electronics that may cause signal interference.
- If you’re using WPS to connect, wait until the WPS indicator stops blinking before trying to make the connection again.
-
What should I do if I cannot access the Linksys RE6350 web-based setup page?
If you cannot access the Linksys RE6350, try any of the following troubleshooting methods:- Make sure you are connected to the extended Wi-Fi name of your range extender
- Powercycle the range extender.
- Move the range extender closer to your router.
- Look up the range extender’s IP address on your router’s DHCP Client Table and try to ping it.
- Reset extender and go through the setup again.
For more detailed information, click here.
-
What should I do if I experience intermittent connection issues when connected to the Linksys RE6350? Make sure that your range extender is getting at least 50 percent of your router’s Wi-Fi signal and is located midway between your router and the area without Wi-Fi. To check your range extender’s wireless signal, access its web-based setup page and click Status > WLAN Statistics > Signal Strength. For instructions on how to check and verify your computer’s wireless connection, click here.
Frequently Asked Questions
What wireless security modes does the Linksys RE6350 support?
The Linksys RE6350 supports WEP, WPA™, WPA2™, and WPA2 / WPA Mixed Mode security types.
Which wireless connection standards and frequencies are supported by the Linksys RE6350?
The Linksys RE6350 supports 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac standards. It also supports the 2.4 GHz and 5 GHz frequencies simultaneously.
What is the maximum PHY Data Rate for each band?
The maximum wireless speed for the 2.4 GHz band is 300 Mbps and the maximum wireless speed for the 5 GHz band is 867 Mbps.
What is the default Wi-Fi name of my Linksys RE6350?
The default Wi-Fi name of your Linksys RE6350 is Linksys Extender Setup.
Does the Linksys RE6350 support simultaneous dual-band (2.4 GHz and 5 GHz)?
Yes.
What is Cross-Band technology and does my Linksys RE6350 support it?
Yes. The Linksys RE6350 supports Cross-Band technology. This technology maximizes simultaneous use of both bands (2.4 GHz and 5 GHz) for high speed data transfer and uninterrupted streaming and gaming.
Where can I find the MAC address of my range extender for Wireless MAC Filtering?
You can find the wireless MAC address of your range extender in its web-based setup page. Go to Status > WLAN Statistics > Extender MAC address and look for Seen by Upstream AP. For detailed instructions, click here.
Can I change the Extended Wireless Settings of my range extender?
Yes. To learn how to change the Extended Wireless Settings, click here.
How can I check if the Linksys RE6350 is connected to my existing wireless network?
To check if the Linksys RE6350 is connected to your network, access the range extender’s webbased setup page. Under Wireless, click Basic Settings > Status.
I have multiple wireless routers or access points in my network, how can I tell which access point / wireless router my range extender is connected to?
To know which access point or wireless router your Linksys RE6350 is connected to, access the range extender’s web-based setup page. Under Status, click WLAN Statistics then check the AP MAC address section. Take note of this as it is the MAC address of the access point or wireless router your Linksys RE6350 is connected to.
Can I connect multiple wireless devices to my Linksys RE6350?
Yes. The Linksys RE6350 acts as an extension of your router or access point so you can connect multiple devices to it.
Is it acceptable to always have the WiFi extension on?
Your choice as to whether to leave your Wi-Fi range extender on or turn it off while not in use is entirely up to you. It uses a very tiny amount of power—almost none at all.
How is Linksys booster put to use?
Any wired Ethernet device can be immediately connected to a wireless network by using it as a wireless bridge. Your range extender should be connected to numerous wireless devices. Your router or access point can be extended by the Linksys Wireless-N range extenders so that you can connect more devices to it.
What is the ideal location for a WiFi booster?
The extender should be placed halfway between your wireless router and your PC, but it MUST be inside the wireless router’s coverage area. Reposition the Extender closer to the device while still within the router’s wireless range if you must utilise a different location.
How can I tell if the Linksys WiFi extender is operating properly?
To see whether your extender is connected to the internet, go to Settings > Status. If everything seems good as shown below, your extender has connected to your router successfully. Your devices can be wired or wirelessly connected to the extender using Ethernet cables.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>