LINKSYS Velop Pro 6E Tri Band Mesh System 3 Pack User Guide
- June 1, 2024
- Linksys
Table of Contents
LINKSYS Velop Pro 6E Tri Band Mesh System 3 Pack User Guide
Step 1
Download the Linksys App from the Apple App Store or the Android Play
Store.
The Linksys App will guide you through the installation process and make the
entire setup experience as quick and easy as possible.
Step 2
Disconnect your old router, if separate from your modem.
Restart your modem by unplugging it and plugging it back in.
Connect your new Linksys Node.
Plug your Linksys Node into power.
Use the provided Ethernet cable to connect your modem to the Internet port on
the Node.
Give your Node a minute to start up.
The status light will go from blinking to solid blue when it’s ready for
setup.
Step 3
Open the Linksys App and follow the setup instructions.
The Linksys App will guide you through setting up your Nodes in a few easy
steps:
- Plugging in additional Nodes if applicable.
- Customizing your WiFi name and password.
- Securing your Node password.
- Creating a Linksys Account for remote management of your network.
- Optimizing the position of your Nodes.
Node lights
Documents / Resources
|
LINKSYS Velop Pro 6E Tri Band Mesh System 3
Pack
[pdf] User Guide
Velop Pro 6E Tri Band Mesh System 3 Pack, Velop Pro, 6E Tri Band Mesh System 3
Pack, Band Mesh System 3 Pack, Mesh System 3 Pack, System 3 Pack
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>