xiamen A70 Series Thermal Label Printer Instruction Manual

Instruction Manual
Thermal Label Printer
A70 series

A70 Series Thermal Label Printer

Version: 1.1

Preface
About this Manual
This manual contains information about the use and installation of the product. Please read this instruction carefully before using the printer and follow the instructions.
International conventions
For your convenience, the following symbols (ICONS) and conventions are used in this manual:

Warning: This sign warns that improper use may result in property damage, serious injury or death.
Caution: This sign indicates caution. Improper use may cause personal injury or damage to items.
Remarks: This mark represents remarks. The information listed can enable you to better use the product or extend the service life of the product.

Packing list

After unpacking the package, check whether the product appearance is intact and check all accessories. If there is any defect, please contact the dealer!

Note: due to the continuous improvement of the product, the specifications, accessories and programs described in the manual are subject to real machines, and we reserve the right to change without notice.

Appearance and Components

Preparation

3.1 Power switch
Turn the printer power switch to I state, that is, turn on the power switch.
Turn the printer power switch to O state, that is, turn off the power switch.

1. Power must be turned off with a power switch. If the power is turned off by unplugging the power plug, the circuit in the printer will be damaged and the printed data will be destroyed.
2. Please use the original power supply of the machine, otherwise the printing quality may be reduced or the printer may be damaged.
3. Wait for a certain time (≧5S) when turning on the power again after the power is turned off. If the power supply is turned on immediately without a certain period of time, faults may occur.
4. After the power is turned off, the power lamp on the operation panel will be off after 2-3 seconds. This is a normal condition, not a malfunction.

3.2 Connect the power supply

1. Connect the power cable.
2. Connect the USB cable
3. Turn on the power
   Set the printer power switch to I.

3.3 Install the driver
Please access help.aiyin.com to download and install the driver, as shown below.

3.3.1 Installation for Windows
a. Download exe format driver file. Click to install.

b. Follow the prompts to complete the installation step by step.

3.3.2 Installation for Mac
a. Connect power and computer

1. Connect the power to the printer through power cord.
2. Connect the printer to your computer through USB cord.
3. Put the labels in, switch on the printer.

Note:
Make sure these three steps are completed before printing in case failing toinstall the printer driver.
b.You can download the driver “Driver for Mac (A70/A70pro)” from “help.aiyin.com“) c. Open “System Preferences”, and click on Security & Privacy'”. （lf you don’t see the warning , you can skip this step） d. Click on “Open AnyWay”button. (lf you don’t see the warning, you can skip this step)

e. Click on open” and continue to install the printer. Follow the installationsteps until you see ” The installation was successful” window.

f. Open “System Preferences”>>click on “Printer and Scanners”.

g. Click “+” to add a new printer. h. Click on Thermal Label Printer, and choose “Select Software” in the drop down menu. i. Choose”Label Printer”,click”OK”.

j. Click Add, now the printer has been installed in your Mac book successfully.

Note:

1. Now you can print directly, if you want to adjust the printing density,printing speed or other parameter, please refer to part 4 Basic Functions”.
2. If you can’t print seccessfully, please restart your computer and try again.

Basic Functions

The status and fault of the printer can be determined by the color of the button indicators and the buzzer, and the printer can be operated simply by the buttons.
4.1 Paper advance function
Turn on the power of the printer, press the “Advance” button, and the printer will send the paper to the specified location according to the type of paper. When using thermal sensitive paper, press the “Advance” button once to release a whole sheet of paper.

4.2 Intelligent learning of paper
Turn off the power supply of the printer, open the upper cover, load the labels and close the upper cover, turn on the power supply of the printer, wait until the normal initialization of the printer is completed(about 3-5 seconds), press the “Advance button” and hold it until the “Dee” sound is heard, and the printer can automatically carry out the intelligent learning of the paper.

4.3 Paper loading
Prompt: Auto paper taking

4.4 Print the device self-check page
When the printer is in standby state and the paper is loaded correctly, press the “Advance” button to remove the paper and hold it until “Dee, Dee Dee” is heard, and then the printer can print the self-check page of the device.
“Setting”→select print→“Manage”→“Print a test page”

Note:
Before printing a test page, please check that your printer has drivers and labels installed.
4.5 Adjust the print grayscale
Note: If your printer content is not clear, you can set the print grayscale to “none”.

4.6 Adjust printer speed and print density
Note:
If you need to adjust the printing speed and printing density, you can adjust it here.

4.7 Adjust the paper size:
Note:
If you need to create a new paper size, you can do so here.
Page”→“Paper”→“Paper Manage”

Trouble shooting

printer to cool down and continue working automatically. Note ①
Red flashing slowly (Once every 2 seconds)| Paper error Lack of paper| Make sure there is no paper adhesion or paper jam. Note ①②
Make sure the printer loads the paper correctly. Note ①②
Perform automatic intelligent label learning.
Red flashing quickly (Twice a second)| Top cover not closed| Check that top cover is closed completely

Note：
① These faults can be eliminated without shutting down the printer. After trouble shooting, the printer can continue to work automatically without causing the loss of printing content.
② Check the faults in sequence. If the previous fault can not be removed, perform the next operation.

Bluetooth connection and usage

Note: It is suitable for devices with Bluetooth.
6.1 How to use it in Android phones:
Step 1: Turn on the printer power;
Step 2: Search the mobile phone on the Bluetooth interface, then click the printer to connect, input the PIN code “0000” or “1234” to complete the pairing;
Step 3: Open the corresponding APP and select the printer that has been paired from the device list.
6.2 How to use it in iPhone:
Step 1: Turn on Bluetooth and printer power
Step 2: Open the corresponding APP and select the printer that has been paired from the device list.
6.3 We recommend the APP:
“Label expert”. You can download it on Google Play Store and APP Store. Or you can scan the QR code below to download the APP.

iOS users scan this code to download| Android users scan this code to download
---|---
https://apps.apple.com/us/app/label-expert/id1663162151| https://zxing.org/w/decodehttps://play.google.com/store/apps/details?id=in.kahub.labelexpert

Remark:

1. It is suitable for devices with Bluetooth.
2. The Bluetooth of the mobile phone shall be turned on during the above connection process.
3. IOS devices can use APP to connect without PIN-code pairing.

Clean the printer

Dust, foreign matter, sticky matter, or other contaminants sticking to the print head or printer may degrade print quality. If it’s contaminated, please clean the print head as follows.

Matters needing attention:

1. Turn off the power supply of the printer before cleaning.
2. The print head gets very hot when printing. Therefore, if you want to clean the print head, turn off the printer power and wait 2 to 3 minutes before starting.
3. When cleaning the print head, do not touch the heating part of the print head, so as not to damage the print head due to static electricity.
4. Be careful not to scratch or damage the print head.

7.1 Cleaning the Printer

1. Please open the top cover and use a Clean Pen (or a cotton swab dipped in diluted alcohol (alcohol or isopropyl alcohol) ) to clean the top cover from the middle of the print head to both sides.
2. After cleaning the print head, do not use the printer immediately. Wait until the clean alcohol used is completely volatilized (1 to 2 minutes) and the print head is completely dry before use.

7.2 Clean sensor, rubber roll and paper path

1. Please open the top cover of the printer and take out the paper roll.
2. Use a dry cotton cloth or cotton swab to wipe away dust or foreign matter.
3. Soak a cotton cloth or cotton swab in medical alcohol and use it to wipe away sticky foreign matter or other contaminants.
4. Do not use the printer immediately after cleaning the parts. Before using it, please wait for alcohol evaporating completely (1 to 2 minutes) and the printer drying completely.

Note: Clean parts when print quality or paper test performance deteriorates.

Technical Parameters

Humidity: 20-90%
Storage Environment| Temperature: -25-55℃
Humidity: 20-93%
Dimension| 1558286mm

Warranty Card

Dear Customer:
Thank you for purchasing our products. In order to protect your legal rights, relieve your worries, and improve customer after-sales service, we’ve specially formulated a warranty policy. Please read it carefully and provide us your valuable opinions and suggestions.

Warranty

1. The machine warranty period of this product is 1 year, as for the printing head is 3 months or 30km (whichever comes first). From the received date of the goods, if the failure is caused by the material or process of the product itself, the corresponding certificate/receipt shall be provided for free repair or replacement.
2. Warranty service can only be performed by our company or authorized service providers, and any unauthorized repair or replacement of parts will invalidate the warranty.
3. Users need to follow the manual guide for equipment installation and other operations. If the equipment hardware is damaged due to improper use by the customer, the warranty will not be granted.
4. This warranty does not cover damage caused by natural disasters such as fire disaster, lightning or other similar reasons.
5. The company reserves the right of having concluding statement.

Customer notice

1. Please specify the reason for the product return in detail.
2. Please contact customer service before returning for repair.
3. We do not accept any form of express delivery.

Model|
---|---
Serial Number|
Customer Name|
Date of purchased|
Shop name|
Phone number|

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.

https://help.ayinprinter.com/
Find out more product knowledge
and after-sales service
Xiamen AiYin Technology Co., Ltd.
Index: www.aiyin.com
Driver: help.aiyin.com
E-mail: support@aiyin.com

References

• Support : AiYin-QiRui-BEEPRT
• AIYIN,Professional Thermal Label Printer Manufacturer | AiYin Printer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>