PROZIS Bicycle Headlight User Manual

: June 16, 2024
: PROZIS

Table of Contents

Bicycle Headlight
Safety warnings
PACKAGE CONTENTS
PRODUCT OVERVIEW
Maintenance and cleaning
INSTRUCTIONS
Troubleshooting
Warranty statement
Documents / Resources

Bicycle Headlight
User Manual
Warranty Statement
V.1 01/2023

Bicycle Headlight

PROZIS Bicycle Headlight - Fig PROZIS Bicycle
Headlight

Prozis is a registered trademark of PROZIS.COM, S.A.
Prozis reserves the right to adjust or modify the product or any of the associated documentation in order to ensure its suitability for use, at any time and without prior notice.
NOTE: The most recent version of this product’s user manual can be found at www.prozis.com/user-manuals
Legal compliance statement
By means of this document, PROZIS declares that the Prozis Bicycle Headlight is fully compliant with all the standards specified in the applicable legislation as well as other relevant clauses.
Prozis will always be available for any additional explanation through our customer support communication channels, available at www.prozis.com/support
To avoid any impact on the environment or human health due to dangerous substances present in electrical and electronic devices, the end users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of electrical and electronic equipment along with unsorted household waste. Dispose of it separately and properly instead.
The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycling bins.
**** This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Safety warnings

DANGER! This symbol, when combined with the note Danger, means high risk.
Failure to observe this warning may lead to injury to life and limb.
DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES

Packing materials are not toys. Children must not play with the packing materials. There is a risk of suffocation.
This appliance may be used by children 8 years and up as well as persons with physical, sensory or mental impairments or lacking experience and knowledge, when supervised or instructed in the safe use of the product and understanding the associated risks.
Children must not play with the device.
Cleaning and user maintenance must not be performed by children without supervision.
Keep the device out of reach of children.
Avoid looking directly into the light of the headlight. Bright lights can harm your eyes. If the light is accidentally pointed towards your eyes, close them and move your head away from the light beam. Do not use any strong focus optical devices to look at the light beam.

CAUTION! This symbol highlights dangerous situations which may lead to minor to moderate injuries, damage, malfunction, and/or destruction of the device.
To prevent harm or damage from happening to users or others, make sure to comply with the following requirements.

Never take the product apart. Poorly made repairs can cause considerable danger to the user.
The LEDs are non-replaceable.
Check before riding to ensure the light unit is securely attached.
NEVER use a damaged bracket.
This product has waterproof features that allow you to use it in light rain. Do not use it in heavy rain conditions.

User manual

PACKAGE CONTENTS

1 x Prozis Bicycle Headlight
1 x USB Charging Cable
1 x Quick Guide

PRODUCT OVERVIEW

(SEE PAGE 2, FIGURE A)

USB Charging Interface
Light Sensor
Switch Button
XPG Lamp
LED Side Lights
Bicycle Bracket
Bicycle Mounting Ring

Maintenance and cleaning

Cleaning:

Switch the product off and detach it from the bicycle before cleaning.
Do not use aggressive or abrasive cleaning agents or materials when cleaning, such as scouring milk or steel wool. These can damage the top surface of the device!
Protect the appliance from water drops and water spray.
Only use a clean, dry cloth to clean the product and never use any corrosive liquids. Use a slightly damp cloth and a mild cleaning agent to remove any stubborn dirt.
Make sure moisture does not enter the product while cleaning to prevent damage to the product and related repairs.

Storage:

Store your appliance inside the original case provided.
When no longer using the device, store it in a dry location, protected from dust and direct sunlight.
If the appliance is not to be used for a longer period of time, make sure to recharge it on a regular basis in order to help maintain battery performance.

INSTRUCTIONS

How to use:
Installation: figure B

PROZIS Bicycle Headlight - INSTRUCTIONS

Unscrew the mounting ring. Pull out the connection. Place it in the handlebar, close it and screw the mounting ring.
USB charging: figure C

PROZIS Bicycle Headlight - USB charging

Plug the USB charging cable into a charging interface (power bank or any device with a USB port). The charging time is about 4 hours.
Operation: figure D

PROZIS Bicycle Headlight - USB charging 1

Press the button. The light will turn blue, which means the automatic lighting mode is activated.
Press again to alternate between the 4 lighting patterns. Brightness will be adjusted according to the lighting mode selected. Long press to switch off the light.

Troubleshooting

Some issues that arise may be solved by the user. If the problem persists after having tried the following solutions, please contact Prozis customer service.

PROBLEM	CAUSE	SOLUTION
No light.	The device is switched off.	Switch on the device.
The battery is drained.	Recharge the battery.

Warranty statement

All electrical and electronic products commercialized by Prozis via www.prozis.com are covered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for final consumers.
This warranty is valid exclusively for consumers who purchase the product for non-professional purposes.
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a 3-year period, counting from the date of initial purchase by a consumer and respective delivery, or for longer if legally established by the applicable national law. In the event that repair is required, this 3-year period is suspended during repair time.
CONSUMABLES
The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is caused by faulty design, materials or production.
HOW TO MAKE A CLAIM
If the need arises to exercise the rights conceded to you through this warranty, please contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information is also provided at the end of this warranty. Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.
WARRANTY REPAIRS
Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.
EXCLUSIONS
The following situations are not covered by this warranty:

Any wear and tear of parts and components resulting from normal product use.
Cracks, dents, scratches, and other types of superficial damage that only affect the product’s appearance.
Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
Use and storage of the product not complying with user manual instructions.
Opening of the product by a third party who is not authorized to proceed to its repair.
Altering or changing parts or components, whether internal or external.
Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
Use of the product in the context of a business, occupation or commerce.
Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.
The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport and component costs.
The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with or modified in any way.

LIMITED RESPONSIBILITY
Prozis cannot be held responsible for indirect damage or loss due to usage of the product.
WHAT TO DO?
To request warranty service, you must first contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions and recommendations.
Send back the product inside its original packaging, including all accessories and documentation, to the following address:
PROZIS
Rua do Cais nº 198
4830-345 Póvoa de Lanhoso
Braga – Portugal
CONTACTS
Prozis is always available for additional clarification through their customer service communication channel at www.prozis.com/support

Zona Franca Industrial
Plat 28 – Pavilhão K – Mod 6
9200-047 Caniçal, Madeira