Colorpanda P1 RGB Monitor Light Bar Instruction Manual
- June 16, 2024
- Colorpanda
Table of Contents
Colorpanda P1 RGB Monitor Light Bar
Product Introduction
Monitor Light Bar Color+
Installation
-
Pull the holder of the bracket to a certain angle
Tear off the protective film
-
As shown in Figure 2&3,Insert the light bar into the clip.
-
Connect the type C connector to the type C port on the lamp.(Figure 3)
-
Place the light bar with clip on the top of your monitor frame. (Figure 4)
The applicable range of the monitor frame thickness is 0.3cm-Scm.
Connect the adaptor to the socket.
The brightness and color setting will be memorized automatically.
App
Scan the QR code to install the Colorpanda App(oryou can search it in the Apple APP store/Google play), then open it Sign up and Log in.
Add the lamp to the APP.
Specifications
- For clip-mounted luminaires, a warning when the luminaire is not suitable for mounting on tubular material.
- For type Y attachments:if the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- To reduce the risk of strangulation the flexible wire connected to this luminaire shall be effectively fixed to the wall if the wire is within arm’s reach.
- For indoor use only .
- Class 2 – SELV Luminaires to be used with Double Insulated, Extra Low Voltage, Safety Isolating Transformers or LED drivers.
- This product is classified as Electrical and Electronic Equipment. Should the time come for you to dispose of this product please ensure that you do so in accordance with the European Waste of Electrical and Electronic Equipment (WEEE) Directive and in compliance with local laws relating to this directive.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
IC Notice:
This Class B RFLD complies with the Canadian standard ICES-005.
Ce DEFR de la classe Best conforme a la NMB-005 du Canada.
ISED:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-005.
Fujian ManewAloT Lighting Co., Ltd.
No.58 Jiaosong Rd., Jiaomei Town, Zhangzhou, Fujian Province,P.R.C