Colorpanda B0BDRP9KSZ Color Changing Smart Light Bulbs User Manual
- June 14, 2024
- Colorpanda
Table of Contents
Colorpanda B0BDRP9KSZ Color Changing Smart Light Bulbs User Manual
Product Introduction
Set up process
Set up in 4 easy steps
1. Download and login to the Amazon Alexa or Google Home app from Google
Play/ Apple Store.
Note:
- If you are using the app for the first time, tap Register to register an account.
- If you already have an account, tap Login with Existing Account to log in to the app.
-
Open the app. First time user? Follow on-screen instructions to create your account.
-
Connect the bulb to the power supply and repeat on-off operations 5 times, then the bulb will fast flash(in intervals of 0.3
seconds) 5 times to access paring mode.
Note:
• Make sure the bulb is turned on/off completely and stay 1-1.5 seconds before next operation each time.
• The paring mode will last 10 mins. -
To add this lamp start by touching add device'(+) and follow the on screen prompts to finish installation.
Specifications
Matters needing attention
- Lamps are not suitable for dimming, suitable for app control.
- For indoor use only.
- Use in Dry Locations only
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- 1ncrease the separation between the equipment and receiver.
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- con suit the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause
undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
IC Notice
This Class B RFLD complies with the Canadian standard ICES-005.
ISED:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-005.
This product contains a light source of energy efficiency class
Xia men SMG intelligent technology Co., Ltd.
Unit 1402-1, No.56 Chengyi North Street
Xiamen Software Phase 3