Westinghouse W-573 112823 LED Indoor Lighting Fixture Installation Guide

Westinghouse W-573 112823 LED Indoor Lighting Fixture

Specifications

• Model : W-573 112823
• Fixture Warranty: 5 years from purchase date
• Indoor use only
• Compatible with dimmable switches (see list of compatible dimmers below)
• Not recommended for use with motion sensors, light sensors, timers, or any other external controls

Compatible Dimmers

FIXTURE WARRANTY

• This Westinghouse lighting fixture is warranted against defects in material and workmanship for five years from the purchase date. This warranty is instead of all other warranties expressed or implied.
• This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.
• This warranty does not cover the costs of removing and re-installing the lighting fixture.
• If this product fails for any reason covered by this warranty, please contact us at www.westinghouse-lighting.com/contact-us.

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE

• Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting.com/contact-us.
• NOTE: Carefully unpack fixtures and parts. Make sure all parts are included before discarding any packaging materials (see Figure 1).

WARNING: ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

• Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for the safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install the fixture. Return to the place of purchase.
• For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.

NOTE: THIS FIXTURE IS SUITABLE FOR USE WITH DIMMABLE SWITCHES, SEE BELOW FOR LIST OF COMPATIBLE DIMMERS

Lutron

| MACL-153M, DVCL-153PR-WH, DVCL-153P, AYCL-153P,| ****

10-100%

SCL-153P, DVCL-253P-WH, MRF2-6CL-WH, PD-10NXD-WH,
SCL-153P-WH, PD-6WCL
Legrand Radiant| RHCL453P| 10-100%
Leviton| DW6HD, IPL06-011-10Z, RDL06-001-10Z, RNL06-001-10Z,| 10-100%
TSL06

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1. Turn off the power at the circuit box to avoid possible electric shock.
2. Remove cap nut (A) from mounting nipple (B). Thread hex nut (N) onto mounting nipple (B) approximately 1/4 inch and insert lock washer 1 (O1), then thread mounting nipple (B) into a mounting bar (C) and secure with hex nut (N).
3. Secure mounting bar (C) to outlet box (D) using outlet box screws (E) (if applicable) (see Fig. 1).
4. Identify color coding of fixture wires (see Fig. 2).
5. Connect the black wire from the fixture with the black wire (hot wire) from the outlet box by wire connector (F), and wrap the wire connector (F) with electrical tape for a more secure connection.
6. Connect the white wire from the fixture with the white wire (neutral wire) from the outlet box by wire connector (F), and wrap the wire connector (F) with electrical tape for a more secure connection.
7. Partially thread green grounding screw (G) into side hole (H) on mounting bar (C) (see fig.1).
8. Wrap the grounding wire from the fixture around the green grounding screw stem (G) leaving enough excess wire, then connect the excess grounding wire from the fixture with the grounding wire from the outlet box by wire connector (F) (if applicable), then wrap the wire connector (F) with electrical tape for a more secure connection.
9. Tighten the green grounding screw (G). Do not over-tighten.
10. Tuck wires inside outlet box (D).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1. Raise canopy (I) to ceiling allowing mounting nipple (B) to protrude through an opening in the canopy (I) (see fig. 1).
2. Secure canopy (I) into place with lock washer 2 (O2) (if applicable) and cap nut (A).
3. Unscrew thumb screws (J) enough to insert glass shade (K) (with clear glass pointed downward).
4. Carefully support glass shade (K) while securing thumb screws (J). Shade (K) is secure when thumb screws (J) fit snugly under shade lip (L).
5. Turn the power back on at the circuit box.

WARNING
Turn off the electricity to the mounting site before beginning installation.
Mounting instructions must be followed exactly as shown for the fixture to be safely supported.

CLEANING AND CARE

To clean, wipe the fixture with a soft cloth. Clean glass with mild soap. Spraying from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool, or abrasive paper to clean this fixture.

ORDERING PARTS
Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from the place of purchase. Use exact wording from diagrams when ordering parts.

FAQ

• Q: What is the warranty period for this lighting fixture?
  • A: This Westinghouse lighting fixture is warranted against defects in material and workmanship for five years from the purchase date.
• Q: What is not covered by the warranty?
  • A: The warranty does not cover acts of nature such as lightning damage, corrosion and discoloration of components, damages caused through abuse, improper installation, surges in electric current, acts of third parties, or the costs of removing and re-installing the lighting fixture.
• Q: Where can I contact for warranty claims?
  • A: If this product fails for any reason covered by the warranty, please contact us at www.westinghouselighting.com/contact-us.

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting. All Rights Reserved. Made in China

References

• Sustainable LED lighting solutions | Philips lighting
• Ceiling Fans | Lighting Fixtures | Lamps
• Contact Us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>