spigen PJ2100 ArcPlay Gaming Keyboard User Manual
- June 16, 2024
- Spigen
Table of Contents
Spigen ArcPlay
Gaming Keyboard
User Manual
PJ2100US
Instruction
➀ Num Lock
➁ Caps Lock
➂ Scroll Lock| ➃ Windows Lock
➄ Multi-function Knob
---|---
Connect
Fn Key combinations 1 (LED)
| Key LED on/off(Toggle)
---|---
| all LED on/off (Toggle)
| Change reaction LED mode.
(Toggle rotation with 7 settings)
| Change RGB key LED color mode.
(Toggle rotation with 10 settings)
| Static LED mode.
The LED mode which customer set the single color
of Key LED through FN+5, 6, DEL, and INS
combination keys available additional Key LED customization
(related to Key LED color setting, Please refer FN+5,6,DEL, and INS.)
| activate Key mask function
(only keys with colors set by Static LED mode will be active.)
For finish Key mask mode, change the LED as FN+3.
| Enter Static Preset LED mode
(sets to factory demo values for color and key effects.)
This mode is a kind of Static LED mode, therefore
the LED effect keep maintained when enter the
FN+3 Mode. for change the single key LED mode,
Please refer FN+6 and FN+3 function.
| Enter Single Key LED color control mode
A. Select the keys to set colors for.
B. Press FN once selection is complete.
C. Color table will appear, select color.
D. Selected keys from A will display selected color
from C.
| Change SIDE LED mode.
(Toggle rotation with 7 settings)
| Function for Static LED color change displayed by FN+3.
A. keyboard color palette activated.
B. Choosing a color.
C. All keys’ colors will change to the selected color.
| Function for Static LED color change displayed by FN+3.
A. keyboard color palette activated
B. Choosing a color for the background color
C. LED color of other keys except the single-key
colors set by FN+6 will change to the selected color.
| Breath effect on/off (only works in FN+3 mode)
| Side LED Brightness ↑/↓
| Side LED Effect speed ↑/↓
| Key LED Brightness ↑/↓
| FN+2 mode LED effect speed ↑/↓
| Adjusts Red color for background LED color set by FN+Del
| Adjusts Green color for background LED color set by FN+Del
| Adjusts Blue color for background LED color set by FN+Del
Fn Key combinations 2 (Keyboard control)
| Window key Lock on/off(Toggle)
---|---
| Factory reset
(For activate the function, please hold key combinatioin 2 seconds or longer)
| 6-key/N-key mode (Toggle)
(For activate the function, please hold key combinatioin 2 seconds or longer)
| Sets polling rate to 1 / 2 / 4 /
8 Khz
| Activate USB 3.0 mode
(Under this mode, the Keyboard use 900mA as working current)
Reset the setting: simultaneously pressing ESC key and connect USB cable, factory reset is initiated.
(return to 500mA setting.)
| Activate USB 2.0 mode
(Under this mode, the Keyboard use 500mA as working current)
Reset the setting: simultaneously pressing ESC key and connect USB cable, factory reset is initiated.
(return to 500mA setting.)
Fn Key combinations 3 (Window Shortcut)
Fn Key combinations 4 + Knob Control key
Software Download
Please visit https://install.spigen.com/, and download the sofware and
manual. Third party input tools are not compatible with the keyboard. Due to
compatibility, versions, brands and drivers of Windows/ macOS, functionalities
of third Party input tools may be affected while using keyboard. please make
sure your operating system and drivers are up to date.
Certain Fn keys or multimedia keys does not work under Windows/Android mode.
Functionalities of certain multimedia keys may be disabled due to
compatibility, versions, brands and drivers of Windows / Android OS /macOS
Important Safety Instructions
- Keep the product, accessories and packaging parts out of reach of children to prevent any accidents and choking hazards.
- Always keep the product dry to avoid corrosion.
- Do not expose the product to extreme temperatures below -10ºC(5ºF) or above 50ºC(131ºF) to preserve the lifespan of the keyboard.
Specifications
| Key layout | 104 Keys + 1 Knob |
|---|---|
| Switch Type | Cherry MX RGB Brown |
| Keycap Profile & Material | OEM profile, |
PBT Double Shot
Backlighting| Support, RGB Type
Interface| USB
Polling Rate & Scan Rate| Max 8,000Hz Support
Software| Support
Support System| Windows
Cable Length| 2M / 6.6ft
Dimensions| 450.0 x 146.9 x 34.3mm/
17.7 x 5.7 x 1.4in
Weight| 1200g / 41.9oz
Components
➀ PJ2100US keyboard
➁ Additional Keycap set
➂ Clear Brush
➃ Keycap puller
➄ USB Cable
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party (for FCC matters only) Spigen
Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA E-mail :
spigen.support@spigen.com
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada license ICES-003.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Customer Service
24-month limited warranty
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given under this limited
warranty.
Thank you for your purchase !
If you have any issues or concerns, let us know at
US, EU & Others: spigen.support@spigen.com
KR: spigen119@spigen.com
We are Prepared and Ready to Solve Your Problems!
US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
Manufacturer : Spigen Korea Co., Ltd.
3MN126280
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>