ZENTY ZT-331 1080P 200ft Wired HDMI Extender over Ethernet User Manual
- June 16, 2024
- ZENTY
Table of Contents
ZENTY ZT-331 1080P 200ft Wired HDMI Extender over Ethernet
Specifications
- Model: ZT-331 | ZT-HDEX-1P
- Resolution: 1080P
- Maximum Transmission Distance: 200ft.
- Power Supply: DC 12V / 1A
- Supports Deep Color up to 24-bits
- Supports 3D
- Supports lossless compressed digital audio: Dolby TrueHD, DTS-HD Master Audio
- EDID copy function
Connection and Operation
- Connect the HDMI signal sources (such as PS5, STB, etc.) to the HDMI transmitter.
- Connect the CAT5e/6 cable to both the output of the transmitter and the input of the receiver. The cables must follow the standard of EIA-TIA 568B.
- Connect the HDMI display to the receiver.
Attention: Please insert and extract cables gently.
Note: When the display doesn’t show a signal, try connecting the HDMI transmitter directly to the display device. Plug the power supply into the transmitter, press the EDID copy button, and the light will flash. The EDID data has been copied from the display device successfully. To reset the EDID, unplug all HDMI devices from the transmitter. With just the power plugged in, press and hold the EDID button for 3 seconds.
Connection Diagram
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or
benzine to clean.
Warranty
If your product does not work properly because of a defect in materials or
workmanship, our company (referred to as the warrantor) will, for the length
of the period indicated below, provide Parts and Labor (5) Years warranty,
which starts with the date of original purchase (Limited Warranty period), at
its option either:
- Repair your product with new or refurbished parts
- Replace it with a new or refurbished product
The decision to repair or replace will be made by the warrantor. During the Labor limited warranty period, there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. You must mail in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.
Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately
insured, and preferably in the original carton. Include a letter detailing the
complaint and provide a daytime phone and/or email address where you can be
reached.
FAQ
- Q: How far can the HDMI signal be transmitted?
- A: The maximum transmission distance is 200ft.
- Q: Does it support 3D?
- A: Yes, it supports 3D.
- Q: What audio formats does it support?
- A: It supports lossless compressed digital audio formats such as Dolby TrueHD and DTS-HD Master Audio.
- Q: How do I reset the EDID?
- A: To reset the EDID, unplug all HDMI devices from the transmitter. With just the power plugged in, press and hold the EDID button for 3 seconds.
Key Features
- Each set includes one transmitter and one receiver
- Easy installation, no need setting
- Transmission over 50m single CAT5e/6 without signal loss
- Supports Deep Color up to 24-bits
- Supports 3D
- Supports lossless compressed digital audio: Dolby TrueHD, DTS-HD Master Audio EDID copy function
Package Contents
- (1) x Transmitter
- (1) x Receiver
- (1) x DC 12V / 1A Power Supply
- (1) x User Manual
Specifications
Panel Descriptions
Connection and Operation
- Connect the HDMI signal sources (such as PS5, STB, etc.) to the HDMI transmitter
- Connect the CAT5e/6 cable to both the output of the transmitter and the input of the receiver. (The cables must follow the standard of EIA-TIA 568B)
- Connect the HDMI display to the receiver
Attention : Please insert and extract cables gently
Note :
- When the display doesn’t show a signal, try to connect the HDMI transmitter to the display device.
- Plug the power supply into the transmitter, press the “EDID” copy button, and the light will flash. The EDID data has been copied from the display device successfully.
- To reset the EDID, unplug all HDMI devices from the transmitter, with just the power plugged in, press and hold the “EDID” button for 3 seconds.
Connection and Diagram
Maintenance
- Clean this unit with a soft, dry cloth.
- Never use alcohol, paint thinner, or benzene to clean.
Warranty
If your product does not work properly because of a defect in materials or workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated below, “Parts and Labor (5) Years”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.
Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately
insured, and preferably in the original carton. Include a letter detailing the
complaint and provide a daytime phone and/or email address where you can be
reached phone and/or email address where you can be reached.
Limited Warranty Limits and Exclusions
This Limited Warranty ONLY COVERS failures due to defects in material or
workmanship and DOES NOT COVER normal wear and tear or cosmetic damage. The
Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by the warrantor, or
failures which result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments,
misadjustment consumer controls, improper maintenance, power line surge,
lightning damage, modification, or service by anyone other than a Factory
Service Center or other Authorized Servicer, or damage that is attributed to
acts of God.
There are no express warranties except as listed under “Limited Warranty Coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, and loss of or damage to media or images, data, or other recorded content. The items listed are not exclusive but are for illustration only). Parts and services, which are not covered by this limited warranty, are your responsibility.
WWW.ZENTY.COM 9807 EMILY LANE STAFFORD, TX 77477 844-200-1945 SUPPORT@ZENTY.COM SALES@ZENTY.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>