ZENTY ZT-105 24 Port Gigabit Ethernet Switch User Manual
- June 12, 2024
- ZENTY
Table of Contents
ZT-105 24 Port Gigabit Ethernet Switch
User Manual
Zenty | Professional A/V Solution Provider
User Manual [V1.0] 24 PORT GIGABIT ETHERNET SWITCH
ZT-105 | ZT-IPS24
ZENTY ®
9807 EMILY LANE
ht © 2021 Zenty AV
STAFFORD, TX 77477
844-200-1945
[email protected]
Introduction
The ZENTY ZT-IPS24 provides 23 ports for you to customize as input or output
ports (23 and 24 are for management by default), and ultimately custom tailor
your own AV over IP matrix. Use the ZT-IPS24 as a standalone matrix or
integrate the switch in to your existing network. Making routing changes and
creating routing presets has never been easier with the new and improved web
GUI interface.
Key Features
❖ 23 customizable ports as Inputs or Outputs | Port 24 for Management
❖ Specifically designed to improve AV data transmission and reception
❖ Gigabit Data Transfer Rate | 2000 Mbps
❖ Automatic VLAN creation for a many many setup
❖ Supports Unknown Unicast / Broadcast / Multicast Storm Control
❖ Control via web GUI or Zenty Control App (available on Google Play and App
Store)
❖ Control 4 and Crestron Drivers Available
Package Contents
❖ 1 x Zenty ZT-IPS24 Switch
❖ 2 x Rackmount Ears
❖ 1 x Power Cord
❖ 1 x User Manual
Specifications
Hardware Specifications
| Ethernet Port | 24 x 1000 Base-T RJ45 |
|---|---|
| Optical Port | 4 x SFP (Can be modified to 4 x 1000 Base-T RJ45, or combo) |
| Control Port | 1 x RJ45 – RS232 Serial Port (115200, 8, N, 1) |
| OOB Port | 1 x 10/100 Base-TX RJ45 (only for web management) |
| Init Key | Press to restart |
Press and hold for 5 seconds for Default Recovery
Data (Alarm)
Input/Output| 2 x Digital Input for external alarm
2 x Digital Output for switch power failure cable link down and PoE link off
Signal type: normal – open or normal – closed from relay
Standard| IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3X,
IEEE802.1Q, IEEE802.1p, IEEE802.3ad, IEEE802.1d, IEEE802.1X
Exchange Capacity| 56Gbps / non-blocking
Package Conversion rate| 95.2Mbps @ 64bytes
Exchange Mode| Store and forward
Package Data Cache| 4.1Mbit
Mac Address List| 8K
Jumbo Frame| 10k bytes
EMI| FCC Part 15, CISPR (EN55022) Class A
EMS| Surge level – 4 execute: IEC61000-4-5
ESD level – 4 execute: IEC61000-4-2
RS level – 4 execute: IEC61000-4-3
EFT level – 4 execute: IEC61000-4-4
CS level – 3 execute: IEC61000-4-6
M/S level – 5 execute: IEC61000-4-8
Software Specifications:
Supported Functions:
❖ 802.1p COS/DSCP/TOS priority
❖ IGMP Snooping
❖ MLD Snooping
❖ Multicast VLAN Registration (MVR)
❖ IP, MAC, port VLAN binding combinations
❖ IPv4 static route setup
❖ Static ARP Add, Delete, Burn-in time setup/check
❖ Group-broadcasting PIM, IGMP V1 / V2 / V3, MLD (IPv4)
❖ DHCP client
❖ Relay repeater, DHCP snooping
❖ Duplex transfer check mechanism
Power
Power Supply| Dual Mode
AC 100 – 240V 50/60Hz
DC 12V 3A
---|---
Power Consumption| 36W
Environmental
| Operating Temperature | -40–75 ℃ |
|---|---|
| Storage Temperature | -40–85 ℃ |
| Size (L x W x H) | 440mm x 205mm x 44mm |
| Weight | 4kg |
Dimensions and Weight
| Length | 440mm / 17.33in |
|---|---|
| Width | 205mm / 8.07in |
| Height | 44mm / 1.73in |
| Weight | 4kg / 8.8lbs |
Regulatory
Safety and Emission| CE | FCC | ROHS
---|---
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.
Warranty
If your product does not work properly because of a defect in materials of
workmanship, our company (referred to as “the warrantor”) will, for the length
of the period indicated as below, “Parts and Labor (5) Years”, which starts
with the date of original purchase (“Limited Warranty period”), at its option
either (a) repair your product with new or refurbished parts, or (b) replace
it with a new or a refurbished product. The decision to repair or replace will
be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts. You
must mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers products purchased as
new. A purchase receipt or other proof of original purchase date is required
for Limited Warranty service.
Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.
Limited Warranty Limits and Exclusions
This Limited Warranty ONLY COVERS failures due to defects in material or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The
Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by warrantor, or failures
which result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments, mis-
adjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributed to
acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY
COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY. (As examples, this excludes damages for lost time, cost of having
someone remove or re-install an installed unit if applicable, travel to and
from the service, loss of or damage to media or images, data or other recorded
content. The items listed are not exclusive, but are for illustration only.)
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
844-200-1945
[email protected]
Copyright © Zenty AV
WWW.ZENTY.COM
9807 EMILY LANE STAFFORD, TX 77477
844-200-1945
[email protected]