ZENTY ZT-R100 66lbs Arms Vesa Wall Mount Kit Installation Guide
- June 12, 2024
- ZENTY
Table of Contents
ZENTY ZT-R100 66lbs Arms Vesa Wall Mount Kit
Product Information
The ZT-R100 is a versatile screen mount that is designed to hold screens ranging from 32 to 65 inches in size. It has a maximum load capacity of 66lbs (30 kg) per screen, making it suitable for a wide range of display devices.
The mount is compatible with VESA 100x100mm and 600x400mm standards, ensuring that it can accommodate most flat-panel displays and monitors.
For any inquiries or assistance with the product, you can contact Zenty at:
- Phone: 844-200-1945
- Email: sales@zenty.com
- Website: www.zenty.com
Product Usage Instructions
-
Determine the desired location for the screen mount and ensure that it is suitable for supporting the weight and size of your screen.
-
Assemble the ZT-R100 according to the instructions provided in the user manual. Make sure to use the appropriate screws and hardware for your specific screen size and VESA standards.
-
Attach the screen mount to the desired location using the provided mounting brackets and hardware. Ensure that it is securely fastened to avoid any accidents or damage.
-
Adjust the position and angle of the screen mount to achieve the desired viewing angle. The ZT-R100 allows for tilt, swivel, and rotation adjustments, providing flexibility in positioning your screen.
-
Carefully place your screen onto the mount, ensuring that it aligns with the VESA mounting holes on the back of the screen. Use the provided screws to secure the screen to the mount.
-
Double-check the stability and level ness of the screen mount.
Make any necessary adjustments to ensure that the screen is securely held in place and properly aligned. -
Connect any necessary cables or wires to your screen, taking care to route them neatly and avoid any strain or tangles.
-
Test the functionality of the screen mount by adjusting the position and angle of the screen. Ensure that it moves smoothly and securely holds the screen in the desired position.
Enjoy your newly mounted screen and make any additional adjustments as needed to optimize your viewing experience.
If you encounter any difficulties during installation or have any questions about using the ZT-R100, refer to the user manual or contact Zenty’s customer support for further assistance.
Max Load Capacity: 66lbs (30 kg) Per Screen
ARMS VESA 100x100mm / 600x400mm Compatible
WARNING
Severe personal injury and property damage can result from improper installation or assembly. Read the following warning carefully before beginning.
- Products must be installed by professionals.
- If you do not understand the instructions or have any concerns or questions, please contact a qualified local installer.
- Do not install or assemble if the product or hardware is damaged or missing, if you require replacement parts, please contact you local distributor for assistance.
- This product fits most 32″ – 65″ LCD / plasma screen; maximum weight of LCD /plasma screen: 30 kg / 66lbs per screen.
- This product has been designed for use on a vertical wall constructed of wood studs (minimum 2″ x 4″ inch(51x102mm)) or masonry (solid concrete).
- For safe installation, the wall you are mounting to must support minimum 3 times the weight of the total load (the mount, the TV and all accessories).
- Do not use this product for any other application than original designed.
- This product contain moving parts, please use with caution.
- When installing flat panel display, please do not damage electrical wiring or power source.
- Installation and routing of monitor cables on the monitor bracket must comply with electro-technical regulations.
- Importantly, mains- and data cables must be secured against twisting and squeezing or shearing.
- The manufacturer will bear no responsibility to the vertical wall of mounting, or incidental or consequential damages arising thereof.
- The manufacturer disclaims any liability for the modifications, improper installation, or installation over the specified weight range. The manufacturer will not be liable for any damages arising out of the use of , or inability to use, the product.
Dimensions
PARTS LIST
INSTALLATION
Zenty®
9807 Emily Lane Stafford, TX 77477
844-200-1945
sales@zenty.com
www.zenty.com