ZENTY ZT-149 Modular Matrix 1080P 60Hz HDBaseT Receiver User Manual
- June 12, 2024
- ZENTY
Table of Contents
Zenty Professional A/V Solution Provider
User Manual
[v1.0]
Modular 1080P HDBaseT 100M
Receiver
ZT-149 | ZT-MEXT-1080-BT100R 
Introduction
This lite version extender uses HD Basset technology. There is no compression, no losses or latency. It can work with other HDBaseT equipment, such as HDBaseT projectors. All of the signals are transmitter via single CAT 5e/6/7 cable. For 1080P resolution, it can transmit to a distance of 70m (230ft.), and for 4K 60Hz (4:2:0), up to 35m (115ft.). This extender is compatible with all HDTV resolutions and supports HDCP 2.2 protocol, along with bi-directional RS232 and IR transmission for long distance control. Power over cable ensures that only one side requires power.
Features
- Transmit high quality audio/video signal; 1080P up to 230ft. and 4K 60Hz (4:2:0) up to 115ft. via single CAT5e/6/7 cable
- Supports full HD, UHD, and 4K 60Hz (4:2:0) resolutions
- HDMI 2.0 | HDCP 2.2 compliant
- Bi-directional IR / Serial control signal transmission
- Power over cable function
- Supports 7.1 DTS Master HD, Dolby True-HD
- LED indicators, EDID pass-through
- Supports CEC control
Specifications
| Transmitter | Receiver | |
|---|---|---|
| Input | 1 x HDMI |
1 x RS232
1 x IR-TX
1 x IR-RX| 1 x HDBaseT
Output| 1 x HDBaseT| 1 x HDMI
1 x RS232
1 x IR-TX
1 x IR RX
Protocol| HDMI 2.0 | HDCP 2.2| HDMI 2.0 | HDCP 2.2
---|---|---
Resolution| 1920×1200, 1680×1050
1360×768, 1280×800
1920×1080, 1600×900
1366×768, 1280×720
1024×576, 1920×1200
1680×1050, 1360×768
1280×800, 4096×2160@30Hz
3840×2160@30Hz
3840×2160@60Hz| 1920×1200, 1680×1050
1360×768, 1280×800
1920×1080, 1600×900
1366×768, 1280×720
1024×576, 1920×1200
1680×1050, 1360×768
1280×800, 4096×2160@30Hz
3840×2160@30Hz
3840×2160@60Hz
Color Space| 1080p: 36-bit Deep color
4K: 24-bit True color 4:2:0| 1080p: 36-bit Deep color
4K: 24-bit True color 4:2:0
Bandwidth| 10.2Gbps| 10.2Gbps
Transmission Distance| 1080: 230Ft.
4K: 115Ft.
| 1080: 230Ft.
4K: 115Ft.
Dimension| 115mm x 84mm x 16mm 4.5” x 3.3” x 0.6”| 115mm x 84mm x 16mm 4.5” x
3.3” x 0.6”
Weight| 120g | 0.3lbs| 120g | 0.3lbs
Power| AC: 100-240V 50/60Hz 1.5A Max
DC: 12V 1500mA| AC: 100-240V 50/60Hz 1.5A Max
DC: 12V 1500mA
Consumption| <11W| <11W
Working Humidity| 10% ~ 90%| 10% ~ 90%
Working Temperature| 0°C ~ 50°C| 0°C ~ 50°C
Storage Temperature| -20°C – 75°C| -20°C – 75°C
Panels
4.1 Transmitter
A. DC 12V power input port
B. PoC Function on/off switch
C. RJ45 Output port
D. HDMI Input port
E. 3-Pin RS232 port
F. IR Transmitter port
G. IR Receiver port
H. Power indicator
I. Link Indicator (indicator will light up when transmitter and receiver have
connected successfully. Flickering means that the connection is not stable.
Off means that theconnection has failed.)
J. Mode indicator (indicator will blink once per second if the system is
running well.)
4.2 Receiver
A. DC 12V power input port
B. PoC Function on/off switch
C. RJ45 Input port
D. HDMI Output port
E. 3-Pin RS232 port
F. IR Transmitter port
G. IR Receiver port
H. Power indicator
I. Link Indicator (indicator will light up when transmitter and receiver have
connected successfully. Flickering means that the connection is not stable.
Off means that the connection has failed.)
J. Mode indicator (indicator will blink once per second if the system is
running well.)
Operation
5.1 Connection Diagram
5.2 RJ-45 Connector
It is suggested to use twisted shielded pair 24AWG cable with a bandwidth of
at least 400MHz, and crystal connector.
TIA/EIA-T568B
Pin| Wire Color
1| White-orange
2| Orange
3| White-green
4| Blue
6| White-blue
6| Green
7| White-brown
8| Brown
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.
Warranty
If your product does not work properly because of a defect in materials of
workmanship, our company (referred to as “the warrantor”) will, for the length
of the period indicated as below, “Parts and Labor (5) Years”, which starts
with the date of original purchase (“Limited Warranty period”), at its option
either (a) repair your product with new or refurbished parts, or (b) replace
it with a new or a refurbished product. The decision to repair or replace will
be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts. You
must mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers products purchased as
new. A purchase receipt or other proof of original purchase date is required
for Limited Warranty service.
Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.
Limited Warranty Limits and Exclusions
This Limited Warranty ONLY COVERS failures due to defects in material or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The
Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by warrantor, or failures
which result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments, mis-
adjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributed to
acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY
COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY. (As examples, this excludes damages for lost time, cost of having
someone remove or re-install an installed unit if applicable, travel to and
from the service, loss of or damage to media or images, data or other recorded
content. The items listed are not exclusive, but are for illustration only.)
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
WWW.ZENTY.COM
9807 EMILY LANE
STAFFORD, TX 77477
844-200-1945
SUPPORT@ZENTY.COM
SALES@ZENTY.COM