ZENTY ZT-133 49 Inch LCD Screen User Manual

June 12, 2024
ZENTY

ZENTY ZT-133 49 Inch LCD Screen

ZENTY-ZT-133-49-Inch-LCD-Screen-product

Product Information

Model No.| LCD Size| Panel Type| Panel Check Standard| Light Source| Resolution| Brightness| Contrast Ratio| Pixel Pitch| Frame Rate| Viewing Angle| Life| Color Saturability| Display Area| Color Degree| Power Max.| Power Consumption
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
Model No.| LCD Size| Panel Type| Panel Check Standard| Light Source| Resolution| Brightness| Contrast Ratio| Pixel Pitch| Frame Rate| Viewing Angle| Life| Color Saturability| Display Area| Color Degree| Power Max.| Power Consumption

Product Usage Instructions

To use the Zenty A/V Solution, please follow these steps:

  1. Connect the display or multi-screen display to the device using the provided remote control and RS232.
  2. Ensure that the power supply is connected to the device.
  3. Turn on the device by pressing the power button.
  4. Adjust the settings such as brightness, contrast, and color saturation according to your preference.
  5. Your Zenty A/V Solution is now ready for use. Enjoy!

Features

  • Supports online software upgrade by USB
  • Embedded software for enlarging more LCD video wall units to one-big LCD screen display or multi-screen display by remote control and RS232
  • Supports logo start up online
  • Interfaces: USB/DP/HDMI/DVI/VGA/RS232
  • Panel type: Manufacturer original
  • Double bezel seam: 3.5mm
  • Resolution: 1920×1080
  • Brightness: 500cd/m²(typ.)
  • Enlarge LCD video walls by HDMI matrix or video wall processor is optional

Specifications

Specifications Model No. ZT-DS49-35-450
  LCD Size 48.50”
  Panel Type LD490DUN-ZMA1
  Panel Check Standard A
  Light Source LED back-light
  Resolution 1920 x 1080
  Brightness 500 (TBD) cd/m2 (Center

1point, Typ.)

Panel| Contrast Ratio| 1200:1 (typ.)
 | Pixel Pitch| 0.55926mm x 0.55926mm
 | Frame Rate| 60Hz
 | Viewing Angle| 178° (H) / 178° (V)
 | Life| 50,000 hrs. (min.)
 | Color Saturability| 72%
 | Display Area| 1074.1 x 604.3 mm (H x V)
 | Color Degree| 1.07B
 | Power| 100 ~ 240V, 50 ~ 60Hz
Power| Max. Power Consumption| <140W

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-9

Product Details

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-1

  1. AUDIO OUT
  2. USB – For upgrading SW
  3. RS232 (RJ-45) IN – Serial Control / IR Receiver
  4. RS232 (RJ-4S) OUT – A – Serlal Control
  5. RS232 (RJ-45) OUT· B · Serial Control
  6. VGAIN
  7. DVI-D IN
  8. DP IN
  9. HDMI IN
  10. HDMIOUT
  11. POWER ON / OFF Switch
  12. AC 110-240V IN

Dimensions

Dimensions: mm

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-2

Accessories

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-3

Specifications Type Parameters

Accessories

| Pot Hook| 4
Metal Handrail| 2
RS232 Cable| 1
RJ45 to RS232 Transfer| 1
CK-LINK CAT 5E LAN Cable| 1
Power Cord| 1
Remote Control| 1

Connection Diagram

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-4

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-5

Bracket Option

  • Aluminum wall mount type fixed
  • Push & Pull pop-up TypeZENTY-ZT-133-49-Inch-LCD-Screen-fig-6

HDMI Matrix Option

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-7

Video Wall Processor Option

ZENTY-ZT-133-49-Inch-LCD-Screen-fig-8

Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.

Warranty

If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (5) Years”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.

During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of the original purchase date is required for Limited Warranty service.

Mail-In Service

When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a daytime phone and/or email address where you can be reached.

Limited Warranty Limits and Exclusions

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributed to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, and loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.) PARTS AND SERVICES, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

WWW.ZENTY.COM
9807 EMILY LANE STAFFORD, TX 77477
844-200-1945
SUPPORT@ZENTY.COM
SALES@ZENTY.COM.

Copyright © Zenty AV.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals