ZENTY ZT-129 Modular Matrix 4K 30Hz HDMI Output Card User Manual
- June 12, 2024
- ZENTY
Table of Contents
ZENTY ZT-129 Modular Matrix 4K 30Hz HDMI Output Card
Contact Information:
- Phone: 844-200-1945
- Email: sales@zenty.com
Product Information
This is a 1-card 1-port 4K30 HDMI output card designed for use with the Zenty series chassis. The Zenty series chassis includes models 9×9, 16×16, 18×18, and 36×36.
Audio and Video Output:
- 1 x HDMI out: 19-pin Type-A
Latency:
- 15 to 30ms
Audio Formats:
- 2CH PCM, DTS-HD Master, TrueHD
Video Resolutions and Cable Distances:
- 720P 60Hz 12-bit: Up to 40ft. / 15m
- 1080P 30Hz 12-bit: Up to 40ft. / 15m
- 1080P 60Hz 12-bit: Up to 40ft. / 15m
- 2160P 20Hz 8-bit: Up to 30ft. / 10m
Standards / Protocols:
- HDCP 1.4
Maximum Pixel Clock:
- HDMI: 296Mhz
Communication and Control:
- HDMI
- HDCP 1.4, DVI-D Supported w/ DVI-HDMI Adapter
Power:
- Power Supply: Internal to/from matrix
- Consumption: 3W
Product Usage Instructions
To clean the unit, use a soft, dry cloth. Avoid using alcohol, paint thinner, or benzine for cleaning.
If your product is not working properly due to a defect in materials or workmanship, our company offers a Limited Warranty of (5) Years from the date of original purchase. During this warranty period, the company will either repair the product with new or refurbished parts, or replace it with a new or refurbished product, at its discretion.
There will be no charge for labor during the Labor limited warranty period, and no charge for parts during the Parts warranty period. To avail of the warranty service, you must mail-in your product during the warranty period. The Limited Warranty is extended only to the original purchaser and covers new products. You will need to provide a purchase receipt or other proof of original purchase date for warranty service. When shipping the unit for repair or replacement, please pack it carefully in the original carton and send it prepaid and adequately insured. Include a letter detailing the complaint and provide a daytime phone number and/or email address where you can be reached.
Contact us for any further assistance or inquiries:
- Phone: 844-200-1945
- Email: sales@zenty.com
For more information, visit our website:
www.zenty.com.
Address: 9807 Emily Lane, Stafford, TX 77477
Introduction
This is a 1-card 1-port 4K30 HDMI output card which is to be used on the Zenty series chassis, including 9×9, 16×16, 18×18 and 36×36.
Features
- Output resolution up to 4K30
- Pass-through signal
- Support HDCP1.4
- HDMI cable distance less than 10m/30ft for 4K resolution
Specifications
Audio and Video
Output| 1 x HDMI out: 19-pin Type-A
Latency| 15 to 30ms
Audio Formats| 2CH PCM, DTS-HD Master, TrueHD
Video Resolutions and Cable Distances| 720P 60Hz 12-bit: Up to 40ft. / 15m
1080P 30Hz 12-bit: Up to 40ft. / 15m 1080P 60Hz 12-bit: Up to 40ft. / 15m
2160P 20Hz 8-bit: Up to 30ft. / 10m
Standards / Protocols| HDCP 1.4
Maximum Pixel Clock| HDMI: 296Mhz
Communication and Control
HDMI| HDCP 1.4, DVI-D Supported w/ DVI-HDMI Adapter
| Power
Power Supply| Internal to / from matrix
Consumption| 3W
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.
Warranty
If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (5) Years”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.
Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.
Limited Warranty Limits and Exclusions
This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
WWW.ZENTY.COM
9807 EMILY LANE STAFFORD, TX 77477
844-200-1945
SUPPORT@ZENTY.COM
SALES@ZENTY.COM.
Copyright © Zenty AV.