ZENTY ZT-131 Modular Matrix Chassis User Manual
- June 16, 2024
- ZENTY
Table of Contents
ZENTY ZT-131 Modular Matrix Chassis User Manual
Introduction
With pure hardware modular chassis structure, it provides a flexible and convenient way to realize any configurations. The I/O cards are range from the HDMI, VGA, CVBS, YPbPr, HDBaseT, Fiber Optic, SDI, all cards can support the 3.5mm audio function. It also supports IR remote, RS232 and TCP/IP/ visual front buttons control. It also supports the TV Wall function, splicing edge adjustment, seamless switching and 32 presets save/recall, presets recycling set up etc.
Connection Diagram
Features
- Seamless Switching, no black/ blue/ flicking screen while switching
- Resolution adjustable from the control software➢ All cards can support corresponding 3.5mm audio embedded or de-embedded
- Supports TCP/IP, RS232 and IR remote control
- Modular design chassis, easier for the cards replacement
- Supports hot-plug
- Supports OSD mark on the input sources
- Supports TV Wall Function and splicing edge adjustment
- Supports flexible inputs and outputs configurations: inputs+outputs≤17 or inputs+outputs≤36
Input / Output Cards
4.1 DVI Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- Supports 1920×1200@60Hz and below
- Automatic detection resolution change
- Supports EDID management and EDID modify
- Supports RGB4:4:4, YUV4:4:4, YUV4:2:2
- Working signal reminder
- Supports Hot-plug
4.2 HDMI Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- Supports HDMI1.3a, compatibility for DVI1.0 protocol, resolution up to 1080P
- Automatic detection resolution change
- Supports HDCP
- Supports RGB4:4:4, YUV4:4:4, YUV4:2:2
- Working signal reminder
- Supports Hot-plug
4.3 VGA Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- Supports 1920×1200@60Hz and below resolutions
- Automatic detection resolution change
- Supports image automatic adjustment
- Supports RGB4:4:4, YUV4:4:4, YUV4:2:2
- Working signal reminder
- Supports Hot-plug
4.4 SDI Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- Supports 1080P
- Supports SMPTE269M, SMPTE192M. SMPTE424M and ITU standard
- Supports image automatic adjustment
- Supports RGB4:4:4, YUV4:4:4, YUV4:2:2
- Working signal reminder
- Supports Hot-plug
4.5 CVBS Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- Supports 1920×1200@60Hz and below resolutions
- Using De-interlacing and 3D reducing noise technology
- Supports RGB4:4:4, YUV4:4:4, YUV4:2:2
- Supports PAL, NTSC and SECAM standard
- Working signal reminder
- Supports Hot-plug
4.6 YPbPr Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- 640×480~1920×1200@60Hz (VESA standard)
- Automatic detection resolution change
- Using De-interlacing and 3D reducing noise technology
- Supports RGB4:4:4, YUV4:4:4, YUV4:2:2
- Working signal reminder
- Supports Hot-plug
4.7 HDBaseT Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- Supports HDBaseT protocol,640×480~1920×1200@60Hz(VESA standard),
- 480i~1080p@60Hz(HDTV Standards)
- Supports 100m transmission（CAT5E/CAT6）
- Automatic detection resolution change
- Supports RGB4:4:4, YUV4:4:4, YUV4:2:2
- Working signal reminder
- Supports Hot-plug
4.8 Fiber Optic Input / Output
- Supports Seamless Switching
- Supports Audio input and output
- Supports 1920×1200@60Hz and below resolutions
- Support advanced EDID management, adjustable EDID
- Supports adjustable brightness, comparison of the RGB
- Supports Hot-plug
Front and Back Panel
5.1 Front Panel
- LCD screen: displays the status of each output port.
- POWER : Light on, power have been well connected
- ACTIVE : Light on, working well
- IR : Supports remote control, to receive the control info
- INPUTS SELECTION : 0~9 input buttons
- OUTPUTS SELECTION : 0~9 input buttons
- MENU : With the input numbers to set up Baud rate, buzzer and IP and so on
- RECALL : To recall the saved scenes
- SAVE : Save current switching status to 1~32 scenes
- LOCK : Lock and Unlock, keep pressing for 5 seconds to lock and unlock
- ENTER : To make sure to perform
- CANCEL : Cancel previous operation
&: To select above 2 outputs. Eg. Input 1 to 3,4,8, first to press input 1,
then press 3+&+4+&+8+ENTER
←: When choose above 2 outputs, press this button can cancel the wrong chosen
output and choose the right one
5.2 Rear Panel
Control Software
6.1 Run the software
Open control software and click to run the software, for the admin user, the
default password is: admin
6.2 Connect to the control port
Click “Connect” on the control software, will show below interface:
IP/Network control: the default IP address is:
LAN 1: 192.168.0.80
LAN 2: 192.168.1.80
Serial/COM control: baud rate: 115200, choose the corresponding port to
connect
6.3 Channel interface
Click Channel will show below interface, all the input sources will be
grouped/listed on the left, and the right side is for the outputs. Users can
right click on the input source to rename, switch to all outputs, OSD mark,
change sources type etc.
6.4 Right click on the Outputs
When move the mouse to the outputs area, can select the related windows to
realize the Splice(TV Wall)/split/ rename/output type/ parameter setting.
Two steps to set up the TV Wall:
Step1 : Select the related windows on the outputs area(Eg. Making a 2×2
Video Wall, select 4 related windows)
Step2: Right click on the selected window, and select “splice”
6.5 Model Interface
Users can user save, load and manage the presets here.
Manage all the saved models/presets, can rename, set up the models recycling,
time and clear all the models.
For the model recycling, users also can click the “Ch Cycle” to do the settings:
Save the models/presets, users can click “Save” button to save the current switching status, choose the model No. And and name the model
Load/recall the models/presets, select the model first, then down to the “load” button to recall the model.
6.6 Config Interface
6.6.1 Connect interface
After click “Config” interface will pop-up the “Soft Config” interface, users
can do the IP address, Serial port, Machine and so on settings:
Machine window: users can turn ON/OFF the buzzer sound, TV Wall splicing edge adjustment etc.
Source window: users can set up the sources group, click the source to change the source type, change the input resolutions etc.
Output window: Users can set up the Video Wall here, output port map, output sources type, resolution, names.
I/O Window : user can do the Input and output cards configuration here, first to select the corresponding model number, enter the input and output card number, then click to refresh the configuration.
User window : Admin could add and manage different users with different rights
Specifications
RS232 Control Code
Baud rate: default 115200;
Data bits: 8bit
Stop bits: 1bit
Parity bit: None
8.1 Switching command
8.1.1 Single channel switching
8.1.2 Fast Multiway Switching
8.1.3 Single channel choosing
8.1.4 Multiway channels closing
8.1.5 Scene save and recall
8.2 Review Status
8.2.1 Channel connection status
8.2.2 System preview
8.3 Command set up:
The network port default parameters
8.4 System command
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.
Warranty
If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (5) Years”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.
Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a daytime phone and/or email address where you can be reached phone and/or email address where you can be reached.
Limited Warranty Limits and Exclusions
This Limited Warranty ONLY COVERS failures due to defects in material or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of God.
There are no express warranties except as listed under “Limited Warranty Coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive but are for illustration only). Parts and service, which are not covered by this limited warranty, are your responsibility.
WWW.ZENTY.COM
9807 EMILY LANE
STAFFORD, TX 77477
844-200-1945
[email protected]
[email protected]