SCHLAGE Omnia App User Guide

: June 16, 2024
: Schlage

Table of Contents

SCHLAGE Omnia App
Product Usage Instructions
Schlage Omnia
How to reset your Schlage Omnia Smart Lock
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCHLAGE Omnia App

Specifications

Product Name: Schlage Omnia TM
Compatibility: Schlage Breeze App
Support: Technical Support Hub – 1300 898 596 or techsupport.au@allegion.com

Product Usage Instructions

Step 1: Download the Schlage Breeze App
To use the Schlage Omnia TM Smart Lock, you will need to download the Schlage Breeze App on your mobile phone. You can find the app on the App Store for iOS devices and on Google Play Store for Android devices.

Step 2: Pair the Schlage Omnia TM through the Schlage Breeze App
Follow the instructions below to pair your Schlage Omnia TM Smart Lock with the Schlage Breeze App:

Ensure that the batteries are installed and the lock has power.
Open the Schlage Breeze App on your mobile phone.
Follow the in-app instructions to pair your Schlage Omnia TM Smart Lock.

Step 3: Having Trouble Pairing?
If you are experiencing difficulties in pairing your Schlage Omnia TM Smart Lock, you can reset it by following the instructions on the next page.

Step 4: How to Reset your Schlage Omnia TM Smart Lock
If you are having trouble pairing your Schlage Omnia TM Smart Lock, follow these steps to reset it back to factory settings:

Remove the Schlage Omnia TM from your door by removing the two screws located on the interior body.
Ensure that the batteries are installed and the lock has power.
Locate the reset button on the inside of the exterior body.
Using a long, pointed object, press and hold down the reset button for 5 seconds until you hear “Input initialisation code.”
Note : If you hear “Please enter administrator code,” you have not held down the button long enough, please try again.
Enter 000000# (six zeros then hash).
You will hear “Deleting administrator successful.” You can now reinstall the Schlage Omnia TM on the door.
Your Schlage Omnia TM Smart Lock has now been reset back to factory settings and can be paired to the Schlage Breeze App.

FAQ

Q: How can I contact Allegion Australia for support?
A: You can reach Allegion Australia’s Technical Support Hub at 1300 898 596 or by emailing techsupport.au@allegion.com.
Q: How can I contact Allegion New Zealand for support?
A: You can reach Allegion New Zealand by calling their Freephone number at 0800 477 869 or by emailing nzinfo@allegion.com.
Q: Where can I find more information about Allegion products?
A: For more information about Allegion products, you can visit their website at www.allegion.com.au for Australia or www.allegion.co.nz for New Zealand.

Schlage Omnia

Use the Schlage Breeze App

Add admins, users and passcodes
Access codes – up to 150 custom and 150 scheduled
Send virtual keys to guests, via text message
Set auto locking and passage mode
Use the Schlage Wi-Fi Bridge for remote access

Pair the Schlage Omnia through the Schlage Breeze App

Follow the instructions on the app
Make sure you are on site
Pair with all locks in proximity
Must make sure the lock is ready to pair (simply touch lock keypad)

Having Trouble Pairing?
Reset your Schlage Omnia Lock by following the instructions on the next page

Download the Schlage Breeze App

For any enquiries, contact the Technical Support Hub on 1300 898 596 or email techsupport.au@allegion.com

How to reset your Schlage Omnia Smart Lock

Remove the Schlage TM Omnia from your door by removing the two screws located on the interior body.
Ensure the batteries are installed and the lock has power.
Hold down the reset button located on the inside of the exterior body, for 5 seconds until you hear “Input initialisation code.”
Note : A long, pointed object will be required to reach the small button.
Note: If you hear “Please enter administrator code.” then you have not held down the button for long enough, please try again.
Enter 000000# (six zeros then hash).
You will hear “Deleting administrator successful.” You can now reinstall the Schlage OmniaTM on the door.
TM Your Schlage Omnia Smart Lock has now been reset back to factory settings and can be paired to the Schlage Breeze app.
Open the Schlage Breeze mobile app and follow the instructions to pair your Schlage TM Omnia Smart Lock.