VIVO DESK-SKIRT-71 Cable Management Desk Organizer Instruction Manual
- June 16, 2024
- Vivo
Table of Contents
71” Cable Management Desk Organizer
Instruction Manual
SKU: DESK-SKIRT-71
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-skirt-60
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| |
---|---|---
[email protected]| www.vivo-us.com
Chat live with an agent!| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity.
We cannot be liable for damage or injury caused by improper mounting,
incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Connect the centers of T Joiners (C) to the ends of the Middle Bars (F). To
distinquish Middle Bars from
Upper/Lower Bars, note that the Middle Bars are shorter.
Connect the Upper/Lower Bars (E) to the sides of the T Joiners (C). Then connect Joiners (G) and Side Bars (B) to open sides of Joiners to complete the frame assembly.
STEP 2
Open the flap and straps of Panel (A) and insert the frame, making sure the
frame is fully inserted and the material is tightly stretched around it.
Fasten Straps (A1) on inside of Panel (A) to secure the frame.
STEP 3
Place the Plastic Mounting Clips (D) in the center of each exposed portion of
the steel bars.
STEP 4
Center the assembled panel under the desktop and use a pencil to mark the
locations of Plastic Mounting Clips (D). NOTE: Desktop must be at least 1”
thick to prevent screws from poking out through the top and damaging the
surface.
NOTE: Make sure the mesh flap on Panel (A) is facing the inside of the desktop.
STEP 5
Drill pilot holes using a 1/8” (3mm) bit. Mount the assembled panel to the
underside of the desk using ST4.8x20mm Screws (W-A) as shown into Plastic
Mounting Clips (D).
STEP 6
Route and organize the cables and secure them using the flap on Panel (A).
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 08/14/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| [email protected]| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Black Cable Management Desk Skirt – VIVO - desk solutions, screen mounting, and more