V I V O DESK-V100EBY Electric Single Motor Desk Frame Instruction Manual

June 16, 2024
V I V O

V I V O DESK-V100EBY Electric Single Motor Desk Frame Instruction Manual

V I V O DESK-V100EBY Electric Single Motor Desk Frame Instruction
Manual

https://vivo-us.com/products/desk-v100eby

help@vivo-us.com
www.vivo-us.com

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

  • DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
  • DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
  • NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
  • NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
  • ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
  • OUTDOOR USE IS PROHIBITED.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7

STEP 8

OPERATING CONTROL PANEL

OPERATING INSTRUCTIONS: Press the up arrow, the desk will automatically raise to the highest position. Pressing the down arrow will automatically lower the desk to the lowest position.

Memory Mode
To store a certain height in the controller’s memory, press and hold the 1 button for 5 seconds. “H1” will be displayed, indicating that the current height has been saved to the 1 button successfully. Repeat the process using buttons 2,3, and 4.

Reset Mode
1. If the height of the desk is incorrect, press the down arrow for 5 seconds, “RES” will be displayed until
the desk moves to the fully lowered position and rebounds slightly.

TROUBLESHOOTING

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us

LAST UPDATED: 07/03/2023
REV1V

Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

www.vivo-us.com

help@vivo-us.com

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

V I V O User Manuals

Related Manuals