XPOWER X-600 Professional Air Mover Owner’s Manual

June 16, 2024
XPOWER

Professional Air Mover
Owner’s Manual
Model:
X-600 / X-600A / X-630 / P-600 / P-630
Read and save these instructions
(115V 60Hz)

Introduction

XPOWER Air Movers are ETL/CETL/CE/GS certified and multifunctional Air Mover with the most efficient engineering design. All XPOWER Air
Features:

  • Low power draw with a velocity over 2400 CFM when switch on High.
  • Super quiet motor and super light weight.
  • Optional Easy clean filter system.
  • Easy carrying and storage stackable.
  • Easily disassembled for thorough cleaning and service.
  • Power cord” lengths are 20’/25″ in US and 10’ for Canada
  • Easy cord wrap on handle
  • Safety screens on open vents.
  • 3-speed switch.
  • 4 air-flow positions (0°, 20°, 45°, 90°).XPOWER X-600 Professional Air Mover - Parts
  • Durable and ruggest housing with a 5 Year Warranty

Operation / Instructions

XPOWER Air Movers are intended to move air and to dry floors, walls, furniture, etc. Durable and easy to operate with an effective balance of static pressure and airflow, the units are suitable for a variety of applications.

  1.  XPOWER Air Movers are shipped ready to be put into service. Prior to plugging the unit into the power source, inspect completely for any shipping damage.
  2. Plug the electrical cord into the power outlet.
  3. Carefully place the Air Mover unit on a stable, flat dry surface.
  4. The unit has four air flow positions, capable to aim airflow across flat surfaces or angled upward.
  5. Tumn the switch to desired speed and make sure it is operating correctly.

XPOWER X-600 Professional Air Mover - BLOWER BLOWER / FAN STORAGE:
Air Movers can be stacked (up to 4) on their sides for storage.
NOTICE:

  1. Stacking feature is not secure for transportation.
  2. Remove the filters before stacking.

Safety Instructions

  1. To prevent electric shock, do not operate unit in standing water.
    Never plug in or unplug the unit with wet hands or while standing in water.

  2. To avoid risk of injury, do not direct air flow at face or body.

  3. To reduce the risk of fire or electric shock, do not use unit with any solid-state speed control device.

  4. Use only with GFCI protected receptables. Please contact a qualified electrician for verification and/or installation of a GFCI receptable if necessary.

  5. Do not operate any Air Mover with a damaged cord or plug. Discard the unit or return it to anauthorized service facility for examination and/or repair.

  6. Unplug the unit from the power source beforeservicing or cleaning.

  7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings. Place the power cord away from traffic area to prevent tripping.

  8. Do not allow children to play with or around an Air Mover at any time.

  9. Do not move or carry an Air Mover while unit is operating.

  10. All Air Movers in operation must be supervised at all times.

Maintenance Instructions

  1. To keep the Air Mover clean, use a damp cloth to wipe the surface of the hdusing.
  2. Never clean the Air Mover with water.
  3. When not in use unplug and store the Air Mover in a dry indoor place out of reach of children.
  4. Always disconnect the Air Mover from its power source before performing any maintenance or cleaning.
  5. Clean the filters (optional item) as often as necessary to avoid loss of airflow.

Troubleshooting

For any problems not listed below, call your local distributor or contact our Service Department.

PROBLEM POSSIBLE CAUSE SOLUTION
Air Movernot running No power input Plug in the Air Mover; check circuit

breaker
Switch not turned on| Turn on switch
Air Mover fan wheel jammed || Remove material jamming fan wheel
Intake or exhaust blocked| Turn unit off and allow to cool, then remove blockage
Air over vibrates excessively| Accumulation of dirt on fan blade,|  Clean Air Mover fan blades

Specification

Model X-600 P-600 X-600A X-630 P-630
Power 1/3 hp 1/3 hp 1/3 hp 1/2 hp 1/2 hp
Amp 3.8A 3.8A 3.8A 5A 5A
Weight 20 lbs 19 lbs 20 lbs 21 lbs 20 lbs
Speeds Three Three Three Three Three
Size (H xW x D) 16 x16 x16 in. 16 x16 x16 in. 16 x16 x16 in. 16×16 x16
in. 16 x16 x16 in.
Daisy Chain N.A NA YES N.A N.A
Cord Length 25 ft 20 ft 25 ft 25 ft 20 ft
Overheating Protecting Thermally
Protected Thermally
Protected Thermally
Protected Thermally
Protected Thermally

Protected
Rated Airflow (on high)| 2400 CFM| 2400 CFM| 2400 CFM| 2800 CFM| 2800 CFM
Positions| 4(0°. 20°. 45°. 90°)| 4(0°, 20°. 45°, 90°| 4(0°, 20°. 45°, 90°)| 4(0°, 20°. 45°, 90°)| 4(0°. 20°, 45°. 90°)
Housing| ABS| PP| ABS| ABS| PP
Safety Marks| Ell / C-ETL| ETL / C-ETL| ETL / C-ETL| Ell / C-ETL| ETL / C-ETL
Filter System| Optional| Optional| Optional| Optional| Optional

XPOWER Limited Warranty (USA)

XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, [abor and one way shipping. The XPOWER Air Mover Housing is covered for a term of five years from the date of original purchase.
Important!
Warranty does not cover signs of misuse including, but not imited to, a unit that has been dropped, subjected to water damage, tampered with, improper voltage use and unauthorized maintenance and repairs. The POWER CORD and FILTERS are not covered by the warranty.

Service
In order to receive service or replacement parts under warranty, you must:
A. Must Call for a Retum Merchandise Authorization (RMA) number through Service Department and obtain ship back instructions.
B. Must have original proof of purchase.
C. Mustuse original none damaged packaging or Industrial certified packaging method.
The end user wil be responsible to ship the unit (with the RMA number showing on the shipping label) to the XPOWER Service Department. Upon inspection, we will advise you of the repairs needed and the cost (if applicable). XPOWER will provide repair or replacement parts depending on warranty.

600 Series Parts List

Item No. Parts Name Item No. Parts Name
600-1 Left Housing 600-2 Grid Cover (Motor Side)
600-3 Switch Plate 600-4 Switch Knob
600-5 Switch Plate 600-6 Motor
600-7 Right Housing 600-8 Power Cord
600-9 Fan 600-10 Grid Cover (Fan Side)
600-11 Air Outlet Grid Cover 600-12 Kick Stand
600-13 Filter I (Motor Side) 600-14
600-15 Rubber Feet (Not Shown) 600-16 Screws and Nuts (Not Shown)
600-17 Capacitor

XPOWER X-600 Professional Air Mover - BLOWER 1

Accessories

Daisy Chain Specifications (applicable for model X-600A)
XPOWER Air Mover Model X-600A is daisy chainable with a low 3.8 amp draw. The 12-amp on-board circuit breaker will allow two (2) additional X-600A units to run on one circuit at the same time.

XPOWER X-600 Professional Air Mover - BLOWER 2

Filters (optional)
Accessories

Asetoffiltersis available for the XPOWER Air Mover which will help prevent small debris and dust from entering the Air Mover. To clean the filters: remove fiters from the unit and wash with warm soapy water, rinse with clean water and letdry thoroughly before reinstalling.

Installation:
Filters snap into the air inlets.
Note:
Filter I is for the Motor side, Filter IT’is for the Fan side| XPOWER X-600
Professional Air Mover - BLOWER 3| Filter Removal:
Pullthe filters out of the blower.
Note:
After cleaning make sure the filllters are dry before installing.|
---|---|---|---

WARRANTY REGISTRATION

Please complete and mail fax for your product warranty.For multiple unit please list seriol numbers on a operate sheat of paper Address Xpower Manufacture,Inc 220 Clary Avenue San Gubrial. Ca 91776,USA Tel 626-285-3301,Fax 626-285-3302

Your Name / Company Name………………………………
Contact Name……………………………………………………..
Title……………………………………………………………………
Address……………………………………………………………
City…………………………………………………………………….
State………………………………………………………………….
Zip………………………………………………………………….
Phone……………………………………………………………..
Fax…………………………………………………………………..
E-mail………………………………………………………………
Blower / Fan Information Model #………………………….
Serial #:………………………………………………………………..
Date of Purchase………………………………………………..
Purchased From…………………………………………………….
Additional Comments/Suggestions…………………………

From:…………………

www.xpower.com
1-(855)-855-8868
info@xpower.com
TO: XPOWER MANUFACTURE, INC.
688 S 6th Ave.
City of Industry, CA 91746, USA
Tel: 855-855-8868

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals