TOSHIBA TCB-KBCN61HAE Connector Cable Instruction Manual

TOSHIBA TCB-KBCN61HAE Connector Cable

Product Information

• Specifications
  • Model: TCB-KBCN61HAE
  • Applicable Indoor Unit: Super-MMS, Super-HRM, Mini-SMMS (MML-AP… 1BH, MMU-AP… 1MH, MMU-AP… 1YH, MMU-AP… 2SH), Super Digital Inverter, Digital Inverter (RAV-SM”2CT-E, RAV-SM562MUT, RAV-SM”’2BT-E)
  • Item Code: J01

Product Usage Instructions

• Connector Cable Installation
  • Connect the connector cable to CN61 on the indoor unit.
  • Make sure to connect the pulse input and static input correctly.
  • The pulse input should have a pulse width of 200 to 300ms and a pulse interval of 200ms or more.
  • The static input should be set to ON to leave ON prevention control prohibition.
• ON/OFF Prohibiting/Permitting
  • Connect the ON/OFF input signal to the OV (COM for 1,2 Pin) terminal.
  • To prohibit or permit individual remote controllers ON/OFF, make the appropriate input signal.
  • During prohibition, the LCD will show the central controlling mark.
• Safety Precautions
  • Please read this section carefully before installation work to install the accessory parts in the prescribed manner.
  • Ensure to observe the safety precautions fully as they deal with serious safety issues.
• Installation Instructions
  • After installation work has been completed, perform a trial operation of the equipment to ensure it is operating normally.
  • Hand over the equipment to the customer and ask them to keep the safety precautions and installation instructions.
  • Installation of accessory parts should be performed by personnel from the dealer where it was purchased or by specialist installation technicians.
  • Incorrect installation by unqualified personnel can result in electric shock, fire, or abnormal operation.
  • Reassembling, repair, or modification of the accessory parts is strictly forbidden.
  • Do not install the parts in a location where flammable gases may be present as it may cause fire.
• FAQ
  • Q: Can I install the accessory parts myself?
  • A: No, installation of accessory parts should be performed by personnel from the dealer where it was purchased or by specialist installation technicians. Incorrect installation by unqualified personnel can result in electric shock, fire, or abnormal operation.
  • Q: Can I reassemble, repair, or modify the accessory parts?
  • A: No, reassembling, repair, or modification of the accessory parts is strictly forbidden. Failure to follow these directions can result in inflammation, earth leakage, or abnormal operation causing electric shock or injury.
  • Q: Where should I not install the parts?
  • A: Do not install the parts in a location where flammable gases may be present. Fire may break out should flammable gas leak into the vicinity of the parts.

Applicable Indoor unit

[Super-MMS, Super-HRM. Mini-SMMS]

• <4-way Air Discharge Cassette Type>
  • MMU-AP***1H
• <2-way Air D-Aarge Cassette Type>
• «Concealed Duct Standard Type>
  • MMD-AP***1BH
• «Concealed Duct High Static Pressure Type>
  • MMD-AP***1H
• * MMK-AP***1H, MMK-AP***2H
• ‹Floor Standing Concealed Type>
  • MML-AP***1BH
• ‹Compact 4-way Cassette Type>
  • MMU-AP***1MH
• <1-way Air Discharge Cassette Type>
  • MMU-AP1YH, MMU-AP2SH
• ‹Slim Duct Type>
  • MMD-AP1SPH, MMD-AP1SH
• ‹Under Ceiling Type>
  • MMC-AP***1H
• «Floor Standing Cabinet Type>
  • MML-AP***1H
• ‹Floor Standing Type>
  • MMF -AP***1H

[Super Digital Inverter, Digital Inverter]

• <4-way Air Discharge Cassette Type>
  • RAV-SM***2UT-E, SP1102UT-E
• * RAV-SM***2CT-E
• ‹High Wall Type>
  • RAV-SM**2KRT-E
• <Compact 4-way Cassette Type>
  • RAV-SM562MUT
• «Concealed Duct Standard Type>
  • RAV-SM***2BT-E

Safety Precautions

• 1 Please read this section carefully before installation work to install the accessory parts in the prescribed manner. The precautions given here deal with serious safety issues. It is, therefore, of the utmost importance that they are observed in full.
• 1 The meanings of safety-related symbols are as follows:

WARNING

• This symbol is used to identify actions that, if carried out incorrectly ignoring this indication, could lead to serious personal injury or even death.

CAUTION

• This symbol is used to identify actions that, if carried out incorrectly ignoring this indication, could lead to serious human injury or property damage.
• 1 After installation work has been completed, perform a trial operation of the equipment to ensure that it is operating normally, and then hand it over to the customer and ask to keep this Safety Precautions and Installation Instruction.

WARNING

Installation of accessory parts should be performed either by personnel from the dealer where it was purchased or by specialist installation technicians.

• 1 Incorrect installation by unqualified personnel can result in electric shock, fire, or abnormal operation. Reassembling, repairing, or modification of these accessory parts is strictly forbidden.
• 1 Failure to follow these directions can result in inflammation, earth leakage, or abnormal operation causing electric shock or injury. Use the specified wires for wiring to connect the terminals securely. To prevent external forces applied to the terminals from affecting the terminals. Do not install a location where flammable gasses may be present.
• 1 Fire may break out should flammable gas leak into the vicinity of the parts. Repair of the accessory parts must be also carried out by personnel from the dealer where it was purcased.
• 1 Fire may break out should flammable gas leak into the vicinity of the parts.

Function

Enable to

1. ON/OFF control from external equipment,
2. prohibit/permit of the remote controller,
3. send signal during remote controller ON & no alarm, and
4. send signal during alarm output.

How to install

1. Be sure to turn off the power switch before installation.
2. Connect the Connector Cable to interface CN61 indoor unit P.C.board
3. An insulation tube or conduit cover must be added to the wires of the optional connector when wires are exposed outside of the Indoor Unit.
   • [ Attention: The length of cables ought to be 2000mm or less including this connector cable(500mm).]

Specification

Pin No. &function Specification

Specification of lead wire

Wiring Diagram

Wiring Diagram (example)

Connector position

Connector position on interface P.C.board

Applicable indoor units
[Super-MMS, Super-HRM, Mini-SMMS]

1. 4-way Air Discharge Cassette
2. Compact 4-way Cassette Type
3. 1-way Air Discharge Cassette Type(2-series) [MMU-APO***SH]
4. Concealed Duct Standard Type
5. Slim Duct
6. Under Ceiling Type
7. High Wall Type (1-series) [MMK-AP***1H]

[Super Digital Inverter, Digital Inverter]

1. 4-way Air Discharge Cassette Type
2. Compact 4-way Cassette Type
3. Concealed Duct Standard Type
4. Under Ceiling Type

Applicable indoor units
[Super-MMS, Super-HRM, Mini-SMMS]

1. 2-way Air Discharge Cassette Type
2. 1-way Air Discharge Cassette Type (1Y series) [MMU-AP***1YH]
3. Concealed Duct High Static Pressure Type
4. Floor Standing Cabinet Type
5. Floor Standing Concealed Type
6. Floor Standing Type

Applicable indoor units
[Super-MMS, Super-HRM, Mini-SMMS]

1. High Wall Type(2-series)

(MMK-AP0072H, AP0092H, AP0122H)
[Super Digital Inverter, Digital Inverter]

1. High Wall Type
2. ЕН99855203
3. Connector Cable (for CN61)
4. MODEL: TCB-KBCN61HAE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>