Shenzhen Carsoul Technology CSWC001 Vehicle Mounted Wireless Charger User Manual
- June 8, 2024
- Shenzhen Carsoul Technology
Table of Contents
**Shenzhen Carsoul Technology CSWC001 Vehicle Mounted Wireless Charger User Manual
**
Introduction
The product is wireless charger transmitter which built-in transmitter module and energy coils. Its design has been authorized by patents. Transmitter coils and cellphone accorded with WPC QI standard can be wireless charged. If cellphone itself hasn’ t wireless charging function which can add wireless transmitter to wireless charge.
Packing list
- Wireless Charger l pcs
- Manual l pcs
- ACC Power Wires l pcs
- Qualification l pcs
Specification Parameter
- Charging standard: WPC QI
- Input Voltage: 12V
- Standby current: <80 mA
- Transmitting power: 15WMAX 5WMIN
- Conversion efficiency: ~73%
- Transmitting frequency: 115kHz ~205kHz
Dismounting preparation
Please check the species and quantities of components are full before installation. Please check automotive electrical equipment working normally or not. For the safety, please dismantle the negative plug off .
Operation instruction
Turn on the device
When vehicle engine start, wireless charging module default to mode “on”
Charging
When vehicle engine start, please put the cellphone accorded with Qi standard on the wireless charging module, which can be wireless charged.
Troubleshooting
If the device cannot working normally, please check and adjust according to following sheet, if still don’ t work, please contact distributor.
| Symptom | Reason | Solution |
|---|---|---|
| Indicator light don’t work | No ACC power supply | Activate the ACC power supply |
| device working abnormal | Restart ACC, restart the device | |
| Blue and white light flash continuously | FOD start | Check whether there’s |
menta material on the device
Can’t be charged| wireless transmitter unidentified or don’t start| Please use
the compatible cellphone
cellphone deviate the transmitter range| Put on the place marked Qi
Disclaimer
Dear client:
Thanks for using our product, we sincerely hope it can bring a fresh driving
experience. Make more convenient, more comfortable and safer during your
driving. If you have any question of it during the usage, welcome to contact
us. Our company advocates driving safely and civilized driving. During the
driving, driver must make sure driving safely, do not check the product affect
driving safely, even causes serious traffic accident. Do not operate the
product unconventionally, otherwise all results which operate unconventionally
during the driving are none business of our product.
Please reading the manual in details before use.
storage battery before working. And cover the vulnerable parts and easy cut
pieces with pearl cotton well.
Attention:
-
Please cover the tools with adhesive tape first to prevent original parts be scratched before dismounting tools.
-
Please put the dismantle parts well to make sure the next working going smoothly because of too many parts during the dismounting period.
-
Please make sure the glue sticks and buckle well before all the components dismounting and restoration. If damaged, please change promptly to avoid abnormal sound during the driving.
-
Be careful of the screw in car when operating in narrow space.
Please take it out when screw in car, otherwise it will be abnormal sound during driving. -
Keep all of the dismounting original components by car owner.
Debugging phase
- The indicator light of this device will flash in turn once then be white light when ACC activate(flash once in turn suggests device self-check successfully).
- Put the cellphone with wireless charging receiver on the wireless charging transmitter marked Qi, and cellphone is in charging status, the screen will shows it is charging.
- Indicator light will be blue when it is charging.
- Blue light flash slowly indicates cellphone charging full. Blue and white indicator lights will flash in turn which indicates FOD power activate that there are some foreign objects (mental) on wireless charging transmitter.
- After check, turn off ACC power supply.
- Clear the rubbish and throw in garage can.
Warranty Card
Name| | Tel|
---|---|---|---
Address|
Product Name| | model|
Distributor| | Maintenance records|
Date of production| |
Warranty: 3 years
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against handful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of tre
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receive r is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.