Wsdcam 113dB Bike Alarm Wireless Vibration Motion Sensor Waterproof-Complete Features/Owner’s Manual

Wsdcam 113dB Bike Alarm Wireless Vibration Motion Sensor Waterproof

Specifications

• DIMENSIONS : 3.74 x 1.61 x 0.87 inches
• WEIGHT : 99 ounces
• BATTERIES: 3 AAA
• WATERPROOF: IP55
• REMOTE CONTROL RANGE: 66 ft
• BRAND: Wsdcam

The Wsdcam Waterproof Bike Alarm which is triggered by vibrations. It features a 113 dB loud alarm sound which provides better security and peace of your mind. It also has 7 levels of adjustable sensitivity which range from gentle touch to push or beat. The Wsdcam has a IP55 waterproof rating and SOS function. You can set the SOS function which automatically turns on the alarm when the bicycle falls down or is titled at an angle greater 45 degrees. You can pair one device with 8 remotes.

Package Contents

• 1* Alarm (including battery)
• 1* Remote (including battery)
• 2* Cable Tie
• 2* Double-sided Sticker
• 1* Screwdriver
• 1* User Manual
• External: Domineering power with tiger form styling and acts a safeguard device to motorbike or bicycle.
• Similar performance to motorbike alarm, 113dB loud speaker although install at a hiding place to frighten the thief/robber.
• Use triaxial accelerometer sensor and special calculation to increase accuracy of robber manner recognition and reduce false alarms caused by noise interference.
• High efficient with 7 adjustable level of sensitivity, from soft touch to push beat and suitable for all conditions.
• 3 ringtones for remote bell sound; long range remote and easy to search the motorbike/bicycle.
• Can trigger SOS function and emit call for help automatically when an accident is occurred to provide more safeguard manner.
• Wireless remote operation; simpler and more convenient to use.
• External Cover: PC material; IP55 water& dust proof
• Double-sided tape installation method is convenient for all types of motorbikes and bicycles.

1. Operating Guides
   • The host uses 3 pcs of AAA battery, normal usage 1-3 months; Standby (continuously): -6 months.
   • The remote control uses 1 pc of 12V/27A alkaline battery normal usage more than 1 year (Assume: 5 times usage/day)
   • Operating environment temperatures: -20-+60 C
   • Operating environment humidity: R/H 80%
   • Storage temperature: -30 C-+70C

External Structure Figure

(Remote control outlook is subjected to the actual product)

Cautions:

• Pay attention on host fixation method suitability, double-sided tape or cable tie when use it.
• Install at a hiding location may reduce the host alarm sound level.
• Do not install the host at surrounded by metal parts location.

Installation Guides

3.1. Host battery replacement and installation

3.1. 1. Factory will install the battery by default. If the battery requires a replacement or installs new batteries, please follow the below figures method by opening the bottom cover, install 3 pcs AAA battery. The host produces 3 times shot ‘Bi’ sound and indicates turn on and use the host directly; Recommend disassemble the battery if it does not use for long period of time.

Dismantle bottom cover method figure

Remove the host’s 1pc bottom screw and use a minus (-) screwdriver to open the bottom cover by rotating or turn around. After opening the bottom cover, continue to open side of the cover until it is easily dismantled by hand. If do not have a minus (-) screwdriver, can try use a solid film or shim to open as shown in the above figure.

Application and Setting

ARM & DISARM

3.2.1.1 Press once time on the remote control [ A] key in standby mode, the host produces “Do..Le..Mi” sound and enters into ARM mode, after 5 seconds, a ‘Bi ‘ sound and enter into alert mode. Any touch or hit occurs at ARM alert mode, the host will trigger the alarm immediately for 2 seconds, detect on any touch or hit again within 2 12 seconds, the alarm will continue for 30 seconds (one ringtone type for 2 seconds alarm; 6 ringtones types for 30 seconds with automatic switching).. 3.2.1.2 Press remote control [] key once at alert situation, the host will produce once “Mi.Le. Do” sound and signals the host was exited from alert mode already. 3.2.1.3 When the host is still alarming, direct press remote control DISARM Key to stop and exit from ARM mode simultaneously. 3.2.2. Touch Sensitivity Level, Volume, SOS setting feature 3.2.2.1 Touch Sensitivity has 7 levels from high to low. 7 ringtones sound prompt, Do, Le, Mi, Fa, So, La, D; Volume has 3 levels, high, medium and low.

SOS is an internationally popular feature and off mode at the factory default setting. Note that the SOS function will recognize the installation state of the host, so please do not change the installation direction again after complete the installation, otherwise, it may cause the function to fail or be abnormal. After the SOS function is turned on, it will automatically call of when the bicycle is tilted more than 45 degrees by accidentally. After corrected back the bicycle to the original position, it will turn off the call of automatically. The SOS trigger sound is in accordance with international conventions/standards.

Setting method
Press and hold the remote [d], the host will continuously prompt the disarming sound (please ignore the sound) until the remote LED light is off and on again before releasing the hand. The host enters into the setting feature. To adjust the sensitivity level, press [ e]key continuously from high to low in the cycle with seven adjustable levels. To adjust the volume, press key continuously from high to low in cycle with 3 adjustable levels.

In case of the SOS function is turned off, press the [ ] key once the host will “Bi” sound once to enter into the calibration mode, and then “Bi. Bi. Bi. Bi. Bi.” 5 beeps are correctly calibrated, and the SOS function is successfully turn on; Otherwise, two long “Bi.. Bi” sounds is a calibration error and fail to turn on (The host shall be placed in static mode before performing the SOS calibration). In case of the SOS function is turned on successfully, press the [] key once, long “Bi” sound twice to turn off SOS function. After completing the setting, press the [] key, the host will exit the setting function.

The host changes the batteries, sensitivity level and volume setting memories will be stored. Because of SOS may needs to recalibrate, so it will automatically turn off.

Bell Ringtone switching function
Press [ 1 key, 3 ringtones to choose and cyclic beeping (ARM mode cannot use).

Bell and search function: Press the bell key and trigger the selected bell ringtone to find the motorbike/bicycle easily

Remote control Learning Code
 The first remote control code learning method: At first, remove the host batteries and install them back after 30 seconds. Long press remote control [ ] key to enter the code learning mode. After the host produces once “Bi” sound, press ARM or DISARM key with twice “Bi.Bi.” sound, you should be able to use new added remote control already. To add more remote controls code learning method: Press old remote control’s DISARM key to disarm at first, then, long-press at old remote control [e]to enter code learning mode, after once Bi’ sound, press new remote control’s ARM or DISARM key with twice “Bi … Bi” sound, you should able to use new added remote control already.

Decoding method: Be cautious when use this function! At first, confirm the host is not at ARM mode; Long press for coded remote control [] key to enter into the code learning mode. After once ‘Bi’ sound, press [E] key with “Bi … Bi … Bi 3 times sound, the host will delete all coded addresses. Please refer to the above method for new code learning.  Be cautious of the host can cater up to 8 remote controls coding only, the first registered remote-control coding will be removed if exceeds 8 remote controls registration.

Battery low power indication
When the host is a low battery (3.3V) condition, a weak Du..Du. 2 times sound was generated when use ARM or DISARM and requires to replace the battery immediately.  When the remote control’ s flashlight becomes dark/faded or the remote-control range becomes shorter, it indicates the battery power is low and replaces with a new battery accordingly.

Figure of bottom cover removal method:

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FREQUENTLY ASKED QUESTIONS

• What is the plastic blue triangle that comes with it for?
  The triangle is to open the alarm case for battery charge. It is placed between the front case and the main unit.

• Does the remote vibrate in your pocket if someone is trying to take your bike?
  No, the remote doesn’t vibrate.

• Is this useful for a motorcycle?
  Yes, it is perfect for a motorcycle

• Cannot get out of standby mode?

• Try and hold down the unlock with 3 seconds. Press bell button. Else take out the battery and re-install.

• Is this weatherproof or waterproof?
  It is IP55 waterproof

• Does vibration from rain trigger the alarm?
  No, it doesn’t trigger the alarm.

• Can you attach the wireless remote to your Keychain?
  Yes, you can attach the wireless remote to your keychain.

• Does it self-alarm?
  No.

• Will this alarm go off when the wind blows?
  No, it goes off only when a certain amount of pressure is applied.

Download pdf Here: https://drive.google.com/file/d/16rtOO1F44AVZ9jGX2YzKsq5n_S_4n3ET/view

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>