TOSHIBA RAS-B07 Multi Split Air Conditioner Owner’s Manual

RAS-B07 Multi Split Air Conditioner

“`html

Specifications:

• Indoor unit (Single Type): RAS-B07, 10, 13, 16, 18, 22,
  24G3KVSG-E RAS-B07, 10, 13, 16, 18, 22, 24G3KVSGB-E

• Outdoor unit (Single Type): RAS-07, 10, 13, 16, 18, 22,
  24J2AVSG-E1

• Indoor unit (Multi Type): RAS-M05G3KVSG-E RAS-M05G3KVSGB-E

Product Usage Instructions:

Preparation Before Use:

1. Open the air inlet grille and remove the air filters.
2. Attach the filters. Refer to the Installation Manual for
   detailed instructions.

Remote Control Reset:

1. Remove the batteries from the remote control.
2. Press [button to reset.
3. Insert the batteries back into the remote control.

Air Flow Direction:

• Press [button: Move the louver vertically.
• Press [button: Move the louver horizontally.
• Vertical (Up-Down) swing can be selected from the MENU
  button.

FAQ:

Q: How do I adjust the display brightness?

A: Follow the procedure outlined in the manual to adjust the
display brightness of the indoor unit.

Q: How do I select different operation modes?

A: Use the remote control to select different modes such as
cooling, heating, fan only, or dehumidification. Refer to the
manual for detailed instructions on each mode.

“`

OWNER’S MANUAL

ENGLISH

Scan QR CODE to access installation and owner’s manual on website. https://www .toshiba-carrier.co.th/manuals/default.aspx
Manual are available in AR/BG/CZ/DA/DE/EL/EN/ES/ET/FI/FR/ HR/HU/IT/LT/LV/NL/NO/PL/PT/RO/RU/SK/SL/SV.

AIR CONDITIONER
For general public use
Indoor unit (Single Type) RAS-B07, 10, 13, 16, 18, 22, 24G3KVSG-E RAS-B07, 10, 13, 16, 18, 22, 24G3KVSGB-E
Outdoor unit (Single Type) RAS-07, 10, 13, 16, 18, 22, 24J2AVSG-E1
Indoor unit (Multi Type) RAS-M05G3KVSG-E RAS-M05G3KVSGB-E

1144250207A

1 INDOOR UNIT DISPLAY
1 ECO (White) 2 Wi-Fi access (White) 3 Hi POWER (White) 4 Timer (White) 5 Operation mode
– Cool (Blue) – Heat (Orange) Display brightness can be adjusted, follow procedure on ”

2 PREPARATION BEFORE USE
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in the Installation Manual).

Loading Batteries (when use wireless operation.) 1. Remove the slide cover. 2. Insert 2 new batteries (AAA type) following the (+) and (­) positions.

Remote Control Reset 1. Remove the batteries.

2. Press

.

3. Insert the batteries.

3 AIR FLOW DIRECTION

1 Press

: Move the

louver in the desired vertical

direction.

2 Press

: Move the

louver in the desired horizontal

direction.

SWING operation can be selected Vertical (Up-Down) swing from MENU button

Swing off

Vertical (Up-Down) Swing

Horizontal (Left-Right) swing

3

Horizontal (Left-Right)

Swing

Vertical and Horizontal Swing

HADA Care flow

HADA CARE FLOW

Note:
Do not move the louver manually by others. The louver may automation positioning by some operation mode.

4 REMOTE CONTROL

1 Infrared signal emitter

1

2 Start/Stop button

3 Mode select button

4 Temperature button

5 Fan speed button

6 Menu select button

7 Set louver Up-Down button

8 Set louver Left-Right button

9 Check button*

*Check button under battery cover

2

4

3

MODE

5

FAN MENU

6

7

FIX FIX

8

5 COOLING / FAN ONLY OPERATION

1. Press

: Select Cool , or Fan only .

2. Press

: Set the desired temperature. Min. 17°C, Max. 30°C.

Fan Only: No temperature indication

3. Press MED+

: Select AUTO, LOW , LOW+ , MED ,

, HIGH

or QUIET

6 AUTOMATIC OPERATION

To automatically select cooling, heating, or fan only operation

1. Press

: Select Auto A.

2. Press
3. Press MED+

: Set the desired temperature. Min. 17°C, Max. 30°C.

: Select AUTO, LOW , LOW+ , MED ,

, HIGH

or QUIET

7 HEATING and 8°C OPERATION

For dehumidification, a moderate cooling performance is controlled automatically.

1. Press

: Select Heat .

2. Press

: Set the desired temperature. Min = 5°C, Max = 30°C.

Temperature range 5-16°C is Heat mode with 8°C operation with less of energy usage

3. Press MED+

: Select AUTO, LOW , LOW+ , MED ,

, HIGH

or QUIET

Note : During 8°C mode active (temperature range 5-16°C), some operation such as QUIET, Hi POWER, TIMER OFF cannot use.

8 DRY OPERATION

For dehumidification, a moderate cooling performance is controlled automatically.

1. Press

: Select Dry .

2. Press

: Set the desired temperature. Min. 17°C, Max. 30°C.

1

Note : DRY mode fan speed is set to Auto only.

9 MENU SETUP

For select more setting of Air conditioner such as Louver select,

Hi Power, OFF Timer and other use MENU button

.

MODE FAN MENU FIX FIX

9.1 LOUVER SWING and HADA CARE FLOW OPERATION

Comfortable air Àow can select from feature. Louver swing opearation:

To distribute air Àow in both vertical and horizontal by swing the louver automatically.

HADA care Àow operation
Air Àow upward to the ceiling, provide Indirect air Àow to body and homogenize room temperature.
Note: During HADA CARE FLOW mode, FIX button cannot active.

EN

Louver Swing and HADA Care Flow Operation Setting

1. Press MENU button for enter menu selection

Blink

During triangle mark blink can select menu by press TEMP. button.
2. Enter Louver set by press MENU button again. triangle mark will stop blink and setting feature will be blink instead. Blink
3. Select Louver swing or HADA CARE FLOW by press TEMP. button.

Swing off
Vertical and Horizontal Swing

Vertical (Up-Down) Swing
Horizontal (Left-Right) Swing

HADA CARE FLOW
H.DA
4. Con¿rm selected feature by press MENU button again.

When feature had selected will return to menu selection display triangle mark will blink .
5. Leave from menu setting display by select exit and press menu button

Leave from menu setting to normal display (no triangle and feature blink).
2

9.2 SILENT OPERATION (Outdoor Unit)
Keep outdoor unit operating silently to ensure either yourself or neighborhood will have a tight sleep in nighttime. By this feature, the cooling capacity will be optimized to deliver such silent experience. The silent operation can be selected from one of two purposes (Silent 1 and Silent 2). There are three setting parameters: Standard level > Silent 1 > Silent 2
Silent 1:
Though operating silently, the Cooling capacity is still prioritized to ensure having suf¿cient comfort inside the room.
This setting is a perfect balance between the Cooling capacity and the Sound level of outdoor unit.
Silent 2:
Compromising the Cooling capacity to the Sound level in any circumstance where the outdoor unit’s sound level is highly prioritized.
This setting has a purpose to reduce the maximum sound level of outdoor unit. Note: While activating of Silent operation, inadequate cooling capacity may occur.
Silent Operation Setting
1. Press MENU button for enter menu selection

9.3 Hi POWER OPERATION To automatically control room temperature and airÀow for faster cooling or heating operation (except in DRY and FAN ONLY mode)
1. Press MENU button for enter menu setting and press TEMP. button to select Hi POWER
Blink both triangle and feature mark Feature not yet set 2. Con¿rm selected feature by press MENU button again
Blink only triangle Feature already set
3. Leave from menu setting display by select EXIT

Blink

During triangle mark blink can select menu by press TEMP. button.
Blink both triangle and feature mark Feature not yet set 2. Enter SILENT set by press MENU button. triangle mark will stop blink and setting feature will be blink instead
3. Select SILENT operation by press TEMP. button

9.4 ECO OPERATION To automatically control room temperature to save energy (except in DRY and FAN ONLY mode)
1. Press MENU button for enter menu setting and press TEMP. button to select ECO
Blink both triangle and feature mark Feature not yet set 2. Con¿rm selected feature by press MENU button again.
Blink only triangle Feature already set
3. Leave from menu setting display by select EXIT.

SILENT#1 SILENT#2

None

4. Con¿rm selected feature by press MENU button again

Blink only triangle Feature already set
When feature had selected will return to menu selection display triangle mark will blink 5. Leave from menu setting display by select EXIT.

Note: Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase). For heating operation the set temperature will decrease.

3

9.5 FIREPLACE OPERATION
Keep indoor unit’s fan blowing continuously during thermo off, to circulate heat from other sources over the room. There are three setting parameters: Default setting > Fireplace 1 > Fireplace 2
Fireplace 1:
During thermo off period, the indoor unit’s fan will continue to run by the same speed, previously selected by end-user.
Fireplace 2:
During thermo off period, the indoor unit’s fan will continue to run at super- low speed, programmed from factory.
Fireplace Operation Setting
1. Press MENU button for enter menu setting and press TEMP. button to select FIREPLACE

9.6 TIMER OFF OPERATION
To set the timer OFF when the air conditioner is operating. 1. Press MENU button for enter menu setting and press TEMP. button to select TIMER OFF.

Blink both triangle and feature mark Feature not yet set
2. Enter TIMER set by press MENU button. triangle mark will stop blink and setting feature will be blink instead.

EN

Blink both triangle and feature mark Feature
°C not yet set
2. Enter FIREPLACE set by press MENU button. triangle mark will stop blink and setting feature will be blink instead.
°C 3. Select FIREPLACE operation by press TEMP. button
°C

3. Select TIMER OFF by press TEMP. button. Can select TIMER OFF from 0.5 – 12hrs.
4. Con¿rm TIMER OFF by press MENU button.
Blink only triangle Feature already set 5. Leave from menu setting display by select EXIT.

FIREPLACE 1 FIREPLACE 2 None
4. Con¿rm selected feature by press MENU button again.
Blink only triangle Feature already set °C
When feature had selected will return to menu selection display triangle mark will blink . 5. Leave from menu setting display by select EXIT.

Note: The setting will be saved for the next same operation.
Cancel TIMER OFF 6. During TIMER OFF already set (no.5) press MENU button and press TEMP.
button to select TIMER OFF.
Blink only triangle Feature already set
7. Press MENU button again will cancel TIMER OFF.

°C
Note: While Fireplace operation on heating mode, indoor unit fan always runs and
cold air breezing might be occurred. Fireplace will operate in Heating mode only.

Blink both triangle and feature mark Feature not yet set
8. Leave from menu setting display by select EXIT.

4

9.7 POWER-SELECTION OPERATION
This function is used when the circuit breaker is shared with other electrical appliances. It limits the maximum current and power consumption to 100%, 75%, or 50% and can be implemented by POWER-SELECTION. The lower percentage, the higher saving and also longer compressor lifetime. Due to the reason that POWER-SELECTION function limits the maximum
current, inadequate cooling capacity may occur.
1. Press MENU button for enter menu setting and press TEMP. button to select POWER-SEL

10 MANUAL DEFORST OPERATION

To defrosting the heat exchanger of the outdoor unit during Heating operation

Press and hold

: for 5 seconds , then remote control display will

show as picture 1 for 2 seconds.

Blink only triangle 2. Enter POWER-SEL setting by press MENU button again.
3. Select POWER-SEL level by press TEMP. button.

100%

75%

50%

4. Confirm POWER-SEL level by press MENU button.

5. Leave from menu setting display by select EXIT.

1

11 DISPLAY LAMP BRIGHTNESS ADJUSTMENT

To decrease the display lamp brightness or turn it off.

1. Press and hold

for 3 seconds until brightness level ( , ,

or ) is shown on remote control LCD then release the button.

2. Press
Remote control LCD

Rise or
Decrease

to adjust brightness in 4 levels.

Operation display

Brightness

Lamp illuminates full brightness.

100%

50% Lamp illuminates 50% brightness.

50% Lamp illuminates 50% brightness and the operation lamp is turned off.

All lamps are turned off.

All turned off

In the examples of and , the lamp illuminates for 5 seconds before going off.

12 AUTO RESTART FUNCTION SETTING
This product is designed so that, after a power failure, it can restart automatically in the same operating mode as before the power failure.
Information The product is shipped with Auto Restart function in the ON position. Turn it OFF if this function is not required.
How to turn ON the Auto Restart Function Press and hold the [OPERATION] button on the indoor unit for 3 seconds
(3 beep sounds but OPERATION lamp does not blink).
How to turn OFF the Auto Restart Function Press and hold the [OPERATION] button on the indoor unit for 3 seconds
(3 beep sounds and OPERATION lamp blink 5 time/sec for 5 seconds).
Notes : In case of ON timer or OFF timer are set, AUTO RESTART OPERATION
does not activate.

13

SELF CLEANING OPERATION (COOL AND DRY OPERATION ONLY)

To protect bad smell caused by the humidity in the indoor unit.

1. If the

button is pressed once during “Cool” or “Dry” mode,

the fan will continue to run for other 30 minutes, then it will turn off

automatically. This will reduce the moisture in the indoor unit.

2. To stop the unit immediately, press the 30 seconds.

more 2 times within

5

14 TEMPORARY OPERATION
In case of the misplaced or discharged remote control Pressing the RESET button, the unit can start or stop without using the remote control. Operation mode is set on AUTOMATIC operation, preset temperature is 24°C and fan operation is automatic speed.

15 REMOTE CONTROL A-B SELECTION

To separate using of remote control for each indoor unit in case of 2 air conditioners are installed nearly. Remote Control B Setup.
1. Press RESET button on the indoor unit to turn the air conditioner ON. 2. Point the remote control at the indoor unit.
3. Push and hold button on the back side of Remote Control “00” will be shown on the display. (Picture 1)

4. Press

during pushing . “B” will show on the display and “00”

will disappear and the air conditioner will turn OFF. The Remote Control

B is memorized. (Picture 2)

Note: 1. Repeat above step to reset Remote Control to be A.

2. Remote Control A has not “A” display.

3. Default setting of Remote Control from factory is A.

17 MAINTENANCE
Firstly, turn off the circuit breaker.
Indoor Unit and Remote Control Clean the indoor unit and the remote control with a wet cloth when needed. No benzine, thinner, polishing powder or chemically-treated duster.
Air filters Clean every 2 weeks.
1. Open the air inlet grille. 2. Remove the air filters. 3. Vacuum or wash and then dry them. 4. Reinstall the air filters and close the air inlet grille.

18 TROUBLESHOOTING (CHECK POINT)

The unit does not operate.
The power main switch is turned off.
The circuit breaker is activated to cut off the power supply.
Stoppage of electric current ON timer is set.

Cooling or Heating is abnormally low.
The filters are blocked with dust. The temperature has been set
improperly. The windows or doors are opened. The air inlet or outlet of the outdoor
unit is blocked. The fan speed is too low. The operation mode is FAN or DRY POWER SELECTION function is
set 75% or 50% (This function is depend on remote controller).

1

2

16 OPERATION AND PERFORMANCE

1. Three-minute protection feature: To prevent the unit from being activated for 3 minutes when suddenly restarted or switched to ON.
2. Preheating operation: Warm up the unit for 5 minutes before the heating operation starts.
3. Warm air control: When the room temperature reaches the set temperature, the fan speed is automatically reduced and the outdoor unit will stop.
4. Automatic defrosting: Fans will stop during defrost operation. 5. Heating capacity: Heat is absorbed from outdoors and released into
the room. When the outdoor temperature is too low, use another recommended heating apparatus in combination with the air conditioner. 6. Consideration for accumulated snow: Select the position for outdoor unit where it will not be subjected to snow drifts, accumulation of leaves or other seasonal debris. 7. Some minor cracking sound may occur when unit operating. This is normal because the cracking sound may be caused by expansion/ contraction of plastic.
Note: Item 2 to 6 for Heating model
Air conditioner operating conditions

Operation
Heating Cooling Dry

Temp.

Outdoor Temperature
15°C ~ 24°C 15°C ~ 46°C 15°C ~ 46°C

Room Temperature
0°C ~ 28°C 21°C ~ 32°C 17°C ~ 32°C

*If connected to multiple type, please refer to information provided with outdoor unit.

6

19 WIRELESS LAN CONNECTION
Toshiba Home AC Control Please visit the application store on your device to download and install Toshiba Home AC Control application.
Application Keyword : Toshiba Home AC Control

Toshiba Home AC Control application support iOS : 9.0 or later. Android : Version 5.0 or later

About Toshiba Home AC Control
1. Toshiba Home AC Control can control AC operation by Smartphone or tablet (mobile device) via internet connection.
2. Everywhere control, control software run on Cloud system and mobile device can set and monitor AC operation via internet connection.
3. Everyone can control, 1 Wireless adapter maximum 5 User (use 1 email register).
4. Multi AC system control, 1 user can control 10 AC. 5. Group control.
5.1 Can create and control 3 groups of AC. 5.2 Can control max 10 AC per group.
Note: 1. Adapter can register only 1 email address, if register with new email, current email will be invalid. 2.1 email address can use for register 5 devices for control same AC.
Register process
Open an application and follow register for User registration.

1 Tab Register

2 Enter email address

3 Select country

4 Enter user name

5 Enter password by 6-10 characters, combination of alphabet and number

6 Check for term and condition

7 Con¿rm information

8 Information will be submitted to email, click link to con¿rm

7

Log in to Toshiba Home AC Control application 1 Connect Wireless adapter to A/C and turn on power supply.
Built-in type, Wireless adapter already install with unit.

EN

2 Open application and select Log in.

3 Enter user name and password.

Add Wireless adapter for control by Toshiba Home AC Control application.

4 Login successful.
Wireless adapter Built-in Active Wireless adapter by remote controller and Auto log in.

1 Select “Add AC (Adapter)” from both display above.

2 Select AC (adapter) connection method.

*Note
1. In case of Wi-Fi router change or Email for register change need to re- process for add Wireless adapter again (Built-in type : Press MODE button at Remote controller 5 seconds for active AP mode).
2. In case of change Wireless adapter to use with other A/C need to factory reset and re-process for add Wireless adapter again (Built-in type : Press MODE button at Remote controller 5 seconds and select “rb”).

8

Add Wireless adapter for control by Toshiba Home AC Control application. 3 AC (adapter) connect

4 Active Wireless adapter by Remote controller

Press and hold MODE button 5 seconds

6 A/C add ¿nished

MODE FAN MENU FIX FIX
WPS mode

Wireless LED mark will blink when AP mode active
5 Connect with Home Wi-Fi Router

Manual input
Wi-Fi Router SSID Wi-Fi Router Password

7 Connect successfully Wireless LED lamp stop blink.
9

Toshiba Home AC Control application Home screen
Menu

Weekly schedule

Setting

EN

All AC On/Off Group AC On/Off
Each AC On/Off
Group name
AC device is ofÀine Noti¿cation ERROR code description (pop up)

Add AC
Sub menu all AC Add Group Delete Group Operation Setting
Sub menu group Select AC Change group name Group operation Setting
Sub menu AC Operation Setting Change name Delete AC
Setting temperature / Actual room temp
Current operation mode of each AC

10

Mode and Condition setting.

Enter operation mode of All AC

Enter operation mode of Group AC Enter operation mode of each AC

Mode select for Toshiba Home AC Control application. Provide for 5 operation modes

Auto

Cool

Dry

Heat

Fan only

Off

11

Setting in operation mode. Mode select
Fan speed set

Tab for select AC Weekly schedule OFF-ON Timer set
Temperature set Indoor temperature Outdoor temperature

OFF-ON timer set 0.5-12hrs.

EN

ON timer set from Off mode only

Louver set Special feature

Off mode

12

Group operation. Maximum 3 groups 1 Group maximum = 10 units. Add group
Add AC in group

Delete AC in group

Please make sure Factory Reset is performed before deleting AC from mobile application. (See owner manual Press and hold MODE button on remote control for 5 second and active dL function)
13

Weekly schedule set.
Day select Monday – Sunday Weekly schedule of all AC unit

Weekly schedule of all AC unit

EN

Time select

Weekly schedule set for each unit

Mode select

Select program for active by tick at select box Weekly schedule cancel.
Weekly schedule not set Weekly schedule set but not active Weekly schedule set and active
14

Energy monitoring

Select Room for Energy monitoring

1 Select Energy monitoring

2 Energy monitoring display

Set cost calculate and currency

Select Energy monitoring display

The power consumption displayed is just an estimate as it is calculated simply. It may sometimes differ from the result measured by the power meter.
15

Export data and send by Email

In case of have some problem can check from Help menu.

EN

Note :
The Wireless Adapter must be installed, maintained, repaired and removed by a quali¿ed installer or quali¿ed service person. Contact dealer and/or service center when equipment is malfunction.

16

References

• Toshiba Carrier | Manuals Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>