BRN GPS-300N Ciclocomputer GPS Instruction Manual

GPS-300N Ciclocomputer GPS

Product Information: GPS – 300N

The GPS – 300N is a cycle computer that provides information like cycling speed, cadence, heart rate, power and altitude. It comes with a bracket, rubber ties, and a micro USB cable for charging. The device has a backlight and can be paired with a smartphone via Bluetooth Low Energy (BLE) for data synchronization.

Item Check List
Before starting to use the GPS – 300N, please check that the following items have been included:

• GPS – 300N Bracket
• Two Rubber Ties
• Cycle Computer Bracket Rubber
• Micro USB Cable
• Four Rubber Ties

How to Mount the Bracket

1. Attach the two rubber tendons to the left and right side of the bracket.
2. Use the rubber ties to tighten the bracket on the handlebar or stem.
3. Place the GPS cycle computer on the bracket and secure it by turning clockwise.

Product Usage Instructions

Turn On/Off
To turn on the GPS – 300N, hold the power key for 3 seconds until you hear a beep sound. To turn it off, press and hold the power key for 3 seconds until the device turns off.

Auto Sleep
The GPS – 300N has an auto sleep feature to save battery. If there is no recording after 6 minutes of no speed and no button press, the device will turn off. If there is recording after 1 hour with no speed and no button press, the device will turn off.

Change Mode
Press the Up and Down keys to change the mode. The available modes are:

• Cycle Mode
• Bike Page
• Cadence Page
• HR Page
• Power Page
• Total

Note: When the corresponding sensors are paired, the Cadence Mode, Heart Rate Mode, and Power Mode will appear. The speed must maintain for 8 seconds or more to have AVG Cadence, AVG Heart Rate, MAX Heart Rate %, and AVG MAX Power data.

View/Delete History
You can view and delete your history by selecting the “View” or “Delete” option on the device. Use the Up and Down keys to switch between tracks and press OK to view or delete them. You can also delete all tracks at once.

Settings

The GPS – 300N has various settings that you can customize. Use the Up and Down keys to select an option and press OK to enter it.

The available settings are:

• Profile
• BLE Connect
• Sensor
• GPS System
• Exercises
• General
• Altitude
• Customized Page Setting
• User Page Type
• Contrast Setting
• System Contrast
• Set Altitude Setting
• Location Sync.
• Set Unit Setting
• Set User Setting

Record
Under cycle mode, press the record button to start recording your cycling data.

Maintenance
If the display contrast changes and figures become faint, it’s time to recharge the battery. Do not expose the GPS – 300N to extremely cold or hot temperatures, and do not leave the unit in direct sunlight for extended periods of time.

Troubleshooting
If you encounter any issues with the GPS – 300N, try moving to an outdoor area without interference or adjusting the sensor according to its manual. If the altitude seems inaccurate, you can enter it manually for more accurate data.

Important Health Notice
When charging the GPS – 300N, do not overstretch the USB plug for keeping it waterproof and dustproof.

Pair to Smart Phone

1. Download “Ride for Life” from Google Play or App Store.
2. Open the app.
3. Go into “Setting”, then go to the page that displays “BLE CONNECT”. Below it, your ID will appear.

Limited Warranty
The GPS – 300N comes with a one-year limited warranty commencing on the date of purchase by the seller. The product will be free from defects in material and workmanship for one year from the date of manufacture.

GPS – 300N

Please check all the following items have been included before starting.

How to mount the bracket

Use the rubber to tighten the bracket on the handlebar or stem with rubber ties.

Place the GPS cycle computer on the bracket and secure it by turning clockwise.

The GPS computer main display and key function

Turn on / off
To start the computer, hold the power key for 3 seconds until bee sound.

Auto Sleep

Auto sleep: When there is no recording after 6 minutes of no speed, and no button pressed the computer will turn off to save battery.
When there is recording after 1 hour with no speed, and no button pressed the computer will turn off to save battery.

Cycle
Press Up and Down Key to change mode.

NOTE: When the corresponding sensors are paired, the Cadence Mode, Heart Rate Mode, and Power Mode will appear.

The speed must maintain for 8 seconds or more to have AVG Cadence, AVG,MAX Heart Rate, MAX Heart Rate %, and AVG, MAX Power data.

Training

Navigation

• View : Select track press up/down key to switch and press OK to view.
• Delete : Select track press up/down key to switch and press OK to delete.

History

Setting

Customized page
Setting → Exercises → User page→ Page → Type

Press up/down key to select option

Contrast
Setting →  General → System → Contrast

Set Altitude
Setting → Altitude→  Location sync.

Backlight
Short press on power button to turn ON/OFF backlight.

Set Sensor
Setting →  Sensor→  Choose→  Sensor Scan

Set Clock
Setting General System Clock
Clock will automatically adjust when GPS signal has been received.

Set Unit
Setting → General→ System→  Unit

Set User
Setting→  Profile → User Profile

Record
Under cycle mode press record.

MAINTENANCE
If the display contrast changes and figures become faint, it’s time to recharge the battery. Do not expose cycle computer to extremely cold or hot temperatures i.e. don’t leave the unit in direct sunlight for extended periods of the time.

TROUBLESHOOTING

• Q1. Display is black or very light:
  The battery power may be low. Recharge the battery.

• Q2. Display becomes dark or black:
  The unit may be too hot. Place the unit in a shaded area, and it will return to normal.

• Q3. The unit operates slowly or struggled:
  The unit is too cold. Warm the unit, and it will return to normal.

• Q4. Data in display varies enormously:
  Check the surroundings for electro magnetic or away from the source of interference.

• Q5. Data in display shows slowly:
  The unit may be affected by low temperature factor but it does not influence the function reading. When the temperature rises,

• Q6. Current Speed does not appear:
  It may cause by the following situation:
  Speed from GPS : GPS signal is weak, please make sure turn on the GPS and move to the outdoor, a wide area without inter
  Speed from the sensor: The distance & positon far, please refer to the sensor’s manual and adjust.

• Q7. Altitude seems not accurate:
  The device altitude can be enter for more accurate data.

LIMITED WARRANTY

The product is for one year limited warranty commencing on the date of purchase by the seller. The product will be free from defects in material and workmanship for one year from the date of manufacture.

• Warranty does not cover damages due to misuse, abuse or accidents, cracked or broken cases, negligence of precautions, improper maintenance or commercial use. Warranty is void if the repairs are done by non authorized service technician.
  The warranties contained herein are expressly in lieu of any other warranties including implied warranty of merchantability and/or fitness for purpose. In no event shall manufacturer be liable for any damages, direct or incidental, consequential or special, arising out of or related to the use of this manual or the product described herein.
  During the warranty period (one year) the product will either be repaired or replaced without charge.

IMPORTANT HEALTH NOTICE
Please read over the following information before using the GPS computer.

• Never use the GPS computer in combination with other medical / implanted electronic equipment and device (especially heart pacemakers, EKG equipment, TENS equipment, cardio-pulmonary machines and pacemaker).
• If you are severely ill or pregnant, please consult your doctor before using GPS computer.
• Keep this device away from children.
• As with most electronic receiving devices, there can sometimes be interference that causes inaccurate display readouts. Avoid using GPS computer near common sources of interference. These include high voltage power lines, air conditioning motor units, fluorescent lights, wristwatches, mobiles and computer.

Charge GP-300N

• The suitable operating temperature is 0°C ~ 40°C.
• Please use Micro USB Cable to charge the battery for 3 hours for fully charge.
• GP300N support charging during operation.
• Do not overstretch the USB plug for keeping waterproof and dustproof.

Pair to Smart Phone

1. Download “Ride for Life” from Google play or APP Store.
2. Open the APP
3. Go into SETTING, then go to page that display BLE CONNECT, below ID will appear.
4. On the smart phone look for the same ID number which shows on the computer.
5. Press RECEIVE DATA, press the green RECEIVE DATA box again. Files will start receiving and a list of files which you had already record will be shown.
6. If you would like to upload the files to Strava, press the box of the file and press the Strava icon on the bottom right hand.
7. Log in to Strava first once all the steps are finish, there would be a little green check on the Strava icon, then press SEND. Upload will start and the data will be removed automatically after uploading.

SPECIFICATIONS

• Time : 99 (hour): 59 (minute): 59 (Second)
• Speed : 0〜99.9KM/0~62.4 Mile
• Trip distance : 0~9999.99 KM / 0~6249.99 Mile
• Odometer : 0~999999 KM/ 0~624999 Mile
• Cadence : 0~999 RPM
• Heart Rate : 30~240 BPM
• Power : 0~999 WATT
• Current Gradient : -99~99
• AVG/MAX Gradient : 0~99
• ALT Gain/ Loss : 0~30479 M/0~99999 FT
• Total Altitude : 0~304799M/0~999999 FT
• Maximum Altitude : 0~3999 M / 0~9999 FT
• Current Altitude : -699~3999M /-999~9999FT

Wheel Size Chart

Documents / Resources

| BRN GPS-300N Ciclocomputer GPS [pdf] Instruction Manual
GPS-300N Ciclocomputer GPS, GPS-300N, Ciclocomputer GPS, GPS, Ciclocomputer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>