Shenzhenshi Jiaju Technology G20 Smart Watch Instruction Manual
- June 6, 2024
- Shenzhenshi Jiaju Technology
Table of Contents
Instruction Manual
- The company reserves the right to modify the content of this notice without notice. According to normal circumstances, some functions are different in a specific software version.
- The product should be charged for more than 2 hours before use, but avoid charging for a long time in an unmanned environment.
- Please attach the magnetic charging cable to the charging port of the bracelet automatically.
- Please use the input voltage: 5V/1A or 5V/2A charging head, with the original charging cable provided by the manufacturer.
- It is forbidden to use the on-board charging head to charge (the voltage is unstable when the car is ignited or turned off);
APP download login
-
APP download method “OnWear”:
1. Apple mobile phones can be downloaded in the App Store;
2. Android phones can be downloaded in Google play store and app treasure;
3. Or scan the QR code in the watch to download (compatible: IOS10.0 above /Android5.0 above); -
Install the APP, please register and log in according to the interface prompts, you need to turn on the
Bluetooth;
In the device interface, select the Bluetooth name
LW41 for binding, and the watch can be used normally.
How to Operate
- Slide the dial interface from top to bottom to enter the shortcut interface;
- Slide the dial interface from bottom to top to enter the information list interface;
- Slide the dial interface from left to right to enter the menu style interface;
- Slide the dial interface from right to left to enter interfaces such as step counting, heart rate and sleep.
| Sports Data
Click the data icon to enter sports data interface and check the corresponding
date for the day: steps, distance and calorie.
---|---
| Messages
After the watch is connected to the mobile APP, the newly pop-up information
on the mobile phone will be pushed to the watch side synchronously. The watch
will store multiple pieces of information.
| Heart Rate
After a successful switch, it starts to measure after the bottom green light
is on; it takes about 30~60s to measure and the measuring value is based on
PPG technology.
| Blood oxygen
After the switch is successful, the red indicator light at the bottom lights
up, and it will start measuring. It takes about
30 to 60 seconds, and the measured value is based on PPG technology.
| Sleep Monitoring
The interface shows your sleep conditions for the day. Data is updated per day
and meanwhile synchronized to APP.
| Breath training
Enter the breathing training function, select the corresponding time, and
follow the prompts on the watch to do the action until it is completed.
| Women’s health
Set the female in the app, set the corresponding status on the
menstrual period and sync to the watch, the watch will display the set status
content.
| Weather
After the watch is connected to the mobile app, the weather will be
automatically synchronized to the watch.
| Sports Mode
Enter Sports Mode to enjoy various exercise modes: hiking, running, climbing,
cycling, basketball, yoga and elliptical machine;
| Stopwatch
Time: click the triangle icon to start and click again to pause (the left icon
means resetting);
| Music
Play Music: After a successful connection, open music player to control;
| Timer
Timer function-After selecting the corresponding time, start the timer, and
the timer will end the vibration reminder.
| Dial switch
The dial can be selected, and the dial can be switched by long
pressing the dial, and it supports push dial (the watch has multiple dials
built in).
| On/Off
Long press “On/Off” key for 3s to power on. The bracelet will automatically
power on when it is charging. Click the “Off” icon to power off.
| System Information
Check the bracelet’s information such as Bluetooth name, Mac address, firmware
version and UI version.
| Restore Factory Settings
All personal data will be re you confirm to restore fac settings.
Product parameter Please read this manual first to ensure safe and correct use
- The data of this product is for health management reference only. Please do not use it as medical data. If abnormal physical data is found, the hospital shall prevail.
- The waterproof rating of the watch is IP68. You can use it normally in daily life situations such as hand washing or rain. Please do not put the watch in hot water, do not perform operations such as underwater pressing or deep diving, and do not expose the watch to corrosion Sexual liquid to prevent damage to the watch.The waterproof function is not permanently effective, and the protective performance may be reduced due to daily wear and tear.
Waterproof rating: IP68
Sensor: 3-axis G-sensor
Battery capacity: 260mAh
Synchronization method: Bluetooth
Resolution: 240*280
Display screen: 1.69TFT
Working time: about 5-7 days
Working temperature: -10℃～50℃
Packing list: host, charging cable
Compatible system: IOS 10.0 above, Android 5.0 above
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction