V I V O MOUNT-KB08S Under Desk Keyboard Tray Instruction Manual
- June 15, 2024
- V I V O
Table of Contents
V I V O MOUNT-KB08S Under Desk Keyboard Tray
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
-
A (x1)
Keyboard Tray Set
-
B (x2)
Connecting Plate -
C (x2)
Height Adjustable Bracket Set -
D (x1)
Keyboard Stop -
S-A (x18)
M5x12mm Screw -
S-B (x8)
M5x14mm Screw -
T-A (x1)
Mounting Template
NOTE: 2 Extra screws have been included of each
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
- Phillips Screwdriver
ASSEMBLY STEPS
STEP 1
Assemble Keyboard Tray Set (A) by placing Connecting Plates (B) into the insets on underneath side of Tray. Secure with M5x12mm Screws (S-A) and a Phillips screwdriver.
STEP 2
Install Keyboard Stop (D) onto assembled Keyboard Tray using M5x12mm Screws (S-A) and a Phillips screwdriver.
STEP 3
Secure Height Adjustable Bracket Set (C) to the sides of Keyboard Tray (A) using M5x12mm Screws (S-A) and a Phillips screwdriver.
STEP 4
Unfold the Adjustable Brackets (C) by pressing down on the levers and pulling the top bracket up. Make sure the brackets are adjusted to the same level for installation.
STEP 5
Hold Mounting Template (T-A) to the underside of desk, 0.5” (12mm) from the edge and mark hole locations.
Drill 3/8” (10mm) deep holes using a 1/8” (3mm) drill bit. Mount keyboard tray assembly using M5x14mm Screws (S-B) and a Phillips screwdriver.
ASSEMBLY COMPLETE
Keyboard tray is now ready for use.
Customer Support
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
SKU: MOUNT-KB08S/SW
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products /mount-kb08s.
GET IN TOUCH | Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Under Desk Keyboard Tray with Swinging Height Adjustment – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>