GE 40532 6-Outlet Surge Protector Instruction Manual

June 15, 2024
GE

GE-logo

GE 40532 6-Outlet Surge Protector

GE-40532-6-Outlet-Surge-Protector-product

Product Instructions

Read and follow all instructions and warranty information before use to ensure the protection of connected equipment and warranty compliance.

  1. Plug the surge protector into a standard grounding duplex wall receptacle. Ensure that there are no exposed conductors.
  2. Make sure electronic equipment is turned off before plugging into the surge protector outlets. Do not use extension cords to connect equipment to the surge protector.
  3. Move the power switch to “ON.” Your surge unit should be providing surge protection.
  4. Connected equipment can now be turned on.

Surge protector — lifetime warranty

  • Jasco Products Company warrants this surge protector to be free of defects in workmanship and/or materials for the life* of the surge protector. If such a defect should arise during the life of the surge protector, Jasco will, at
    its option, either repair or replace the surge protector without charge. This warranty does not cover damage caused by lightning, accident, misuse or alterations to the surge protector.

  • This surge protector, like all surge protectors, has a finite lifespan. Even under normal circumstances and in the absence of defects, the product’s life will expire when the surge protector’s component capacity has been exceeded, thereby ceasing to provide protection from surges.

Warranty replacement procedure

  1. Call the Jasco Customer Information Center at 1-800-654-8483 to get a Return Authorization Number (RA#), shipping instructions, and a prepaid return address label.
  2. Return the Jasco surge protector, freight prepaid, to Jasco Products Company. Surge protectors returned to Jasco must have an RA# included in the mailing address to be accepted.
  3. The original purchaser will be asked to send the surge protector, a copy of the sales receipt for the product, your name, address, phone number, and a description of the problem.

Connected Equipment Warranty

  • Equipment Replacement Guarantee for Surge Model: 37210
  • Maximum Warranty Amount: $100,000(USD)

NOTE: This device is not a lightning arrestor, so it will not afford protection when lightning strikes a nearby power line, the house, the service entrance or the antenna. The Warranty is void if a power disturbance damages your equipment through the coax, phone or network lines.
Jasco will pay up to the maximum warranty amount offered for the surge protector purchased to repair or replace up to an amount equal to the fair market value or the original purchase price, whichever is less, of your electronics equipment, if damaged by a transient surge (except those caused by direct lightning), within the life* of the surge protector, while properly and directly connected to this surge protector. JASCO DISCLAIMS AND ASSUMES NO LIABILITY FOR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OR DAMAGE TO SOFTWARE OR DATA OR DAMAGES OR COSTS ASSOCIATED WITH BUSINESS INTERRUPTION OR OTHER DAMAGES DUE TO LOSS OR DAMAGE TO EQUIPMENT, SOFTWARE OR DATA. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that may vary from state to state. This warranty is secondary to any existing coverage of any connected equipment, including but not limited to, any manufacturer’s warranty, extended warranties, or insurance coverage.

To qualify for a connected equipment warranty:

  1. All connected equipment must be UL and/or CSA-approved.
  2. The Jasco surge protector must be plugged into properly wired and grounded outlets, no extension cords, adapters, other ground wires or electrical connectors may be used, with the sole exception of other standard Jasco 120V products approved for that use. The installation must comply with all applicable electrical and safety codes set forth pursuant to the National Electrical Code (NEC).
  3. Any claim under the warranty policy must be made within 15 days of the date of the alleged damage to the connected equipment.

For connected equipment coverage, the following conditions must be satisfied:

  • All equipment eligible for warranty coverage must be plugged directly into the Jasco surge protector. Equipment connected to the protected equipment, but not plugged directly into the surge protector will not be covered.
  • The equipment must have been damaged by a covered power disturbance that passed through the Jasco surge protector.
  • The Jasco surge protector must be damaged from the power disturbance.
  • The Jasco surge protector’s protection capacity must not have been exceeded.

Connected equipment claim procedure

  1. Call the Jasco Customer Information Center at 1-800-654-8483 to get a Return Authorization Number (RA#), shipping instructions, and a prepaid return address label.
  2. After you have received the prepaid return address label, return the Jasco surge protector, freight prepaid, to Jasco Products Company. Surge protectors returned to Jasco Products Company, Inc. must have an RA# included in the mailing address to be accepted.
  3. Jasco will determine whether the damage to your equipment is covered by this warranty policy. If you are covered, a claims adjuster will contact you and Jasco will do one of the following at its own discretion:
    • Authorize a service center to repair damaged equipment.
    • Replace damaged equipment with equivalent or better.
    • Reimburse customers the fair market value of the damaged equipment.
    • Reimburse the customer the initial purchase price of the damaged equipment (the customer is to provide a dated bill of sale).
  4. Jasco retains the right to determine whether the damage to the connected equipment is due to Jasco surge protector failure by requesting that damaged equipment be sent to Jasco for inspection.

WARNING

~RISK OF ELECTRIC SHOCK

  • DO NOT USE IN WET LOCATIONS
  • KEEP CHILDREN AWAY
  • USE INDOORS ONLY
  • FULLY INSERT PLUG

RISK OF FIRE

  • DO NOT EXCEED ELECTRICAL RATINGS

NOT FOR USE WITH

  • AQUARIUMS OR OTHER WATER-RELATED PRODUCTS
  • GENERATORS AND POWER INVERTERS
  • MEDICAL LIFE-SUPPORT PRODUCTS

MADE IN CHINA

GE is a trademark of General Electric Company and is under license by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114. This Jasco product comes with a limited lifetime warranty. Visit www.byjasco.com for warranty details.

Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7 AM-8 PM CST.

FREQUENTLY ASKED QUESTIONS

What is the brand and model of the 6-outlet surge protector described in the details?

The brand is GE, and the model is 40532.

How many total power outlets does the GE 40532 6-outlet surge protector have?

The surge protector has 6 total power outlets.

What is the voltage rating of the GE 40532 6-outlet surge protector?

The voltage rating is 250 Volts.

What special features are associated with the GE 40532 6-outlet surge protector?

The special features include an On and Off Switch, Surge Protection, and Mountable design.

What are the recommended uses for the GE 40532 6-outlet surge protector as mentioned under Recommended Uses For Product?

It is recommended for use in the office, garage, workshop, and apartment.

What is the amperage and maximum surge rating of the GE 40532 6-outlet surge protector?

The amperage is 15 Amps, and the maximum surge rating is 620 Joules.

What is the plug format and number of ports for the GE 40532 6-outlet surge protector?

The plug format is Type B, and it has 6 ports.

Which devices are listed as compatible with the GE 40532 6-outlet surge protector under Compatible Devices?

Compatible devices include Television, Air Conditioner, Hair Dryer, Smartphone, and more.

What color and shape does the GE 40532 6-outlet surge protector have?

The color is White, and the shape is described as Mount.

What are the item dimensions (LxWxH) and weight of the GE 40532 6-outlet surge protector?

The dimensions are 1.5 x 2.75 x 5.5 inches, and the weight is 3.68 ounces.

How does the GE 40532 6-outlet surge protector provide expanded power, and where is it recommended for use?

It provides expanded power with six grounded AC outlets and is recommended for use at home, office, workshop, or garage.

What type of cord does the GE 40532 6-outlet surge protector have, and what is its length?

The surge protector has a 2ft. power cord comprised of heavy-duty cable housed in durable PVC insulation and jacket with a space-saving flat plug.

What protective features does the GE 40532 6-outlet surge protector offer against voltage spikes and circuit overloads?

It provides surge protection with a rating of 620 Joules, an integrated circuit breaker with a reset switch, and automatic shutdown technology for ultimate protection.

How does the functionality of the GE 40532 6-outlet surge protector allow for easy mounting and control of electronics?

The surge protector has keyhole slots for easy mounting to a desk, table, or counter. It also features a reset switch for easy control of connected electronics.

What brand is associated with the GE 40532 6-outlet surge protector, and what is mentioned about its industry standards and replacement policy?

GE is the brand, and it is mentioned as the #1 brand in surge protection and extension cords. The device is UL listed with a limited-lifetime replacement policy, providing peace of mind.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: GE 40532 6-Outlet Surge Protector Instruction Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GE User Manuals

Related Manuals