DENALI B09JCQ2LCK 14 Piece Drill and Tap Combo Set User Manual

June 15, 2024
DENALI

14- piece Tap Set

DENALI B09JCQ2LCK 14 Piece Drill and Tap Combo Set

B09JCQ2LCK

Content

Specifications :

Net weight 0.55 lbs (249.5 g)
 Case dimensions 5.08 x 2.88 x 0.91″

(12.9 x 7.3 x 2.3 cm)

Tap drill chart

Tap size Drill bit size
Nearest fractional imperial drill size Metric drill size
1/8NPT27 5/16″
6NC32 7/64″
8NC32 9/64″
10NC24 5/32″
10NF32 5/32″
12NC24 11/64″
1/4NC20 13/64″
1/4NF28 7/32″
5/16NC18 17/64″
5/16NF24 17/64″
3/8NC16 5/16″
3/8NF24 21/64″
7/16NC14 3/8″
1/2NC13 27/64″

Markings on taps

1 /4 NC20

| Diameter of the thread in inch
---|---
| Thread type
» NC National Coarse Thread
» NF National Fine Thread
» National Pipe Thread
| Number of threads per inch

Suggested lubrication

Steel cutting oil
Aluminum/ brass/ magnesium/ zinc/ copper Kerosene

Important Safeguards

DANGER Risk of suffocation! Keep any packaging materials away from children and pets — these materials are a potential source of danger, e.g. suffocation.

  • Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
  • The product is for hand cutting applications only. Do not use for machine cutting.
  • Discard immediately if any chipping or cracking of this product has occurred.
  • Keep the product away from children and pets.
  • Always use a file to test the hardness of the workpiece. The workpiece is too hard for use with the product if it cannot be cut by a file.
  • Before using the tap, refer to the tap drill chart for the correct drill size for each tap size.
  • Use proper cutting oil for the workpiece. Lubrication is necessary for accurately formed threads and for preventing damages to the taps.

Intended Use

  • The product is intended to be used with a suitable T-handle tap wrench or adjustable tap wrench for the tap size. Always follow the tap wrench manufacturer’s instructions for use.
  • The product is intended to cut threads or chase lightly damaged or rusted pre- threaded holes.
  • The taps are plug taps for general purpose threading, suitable for tapping and threading steel, aluminum, brass, cast iron, softwood and hardwood.

Cleaning and Storage

  • To clean the product, wipe with a damp cloth. Rinse the parts and let all parts dry completely.
  • Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
  • Use a small brush or compressed air (max. 3 bar) to remove stubborn dust, if needed.
  • Coat all parts with a thin coat of household oil to prevent a buildup of rust.
  • Store all parts in the carrying case.

Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader:

https://www.amazon.com/review/review-your-purchases/listing/?ref=HPB_UM_CR

UK: amazon.co.uk/review/review-your-purchases#
If you need help with your Denali product, please use the website or number below.
US: amazon.com/gp/help/customer/contact- us
UK: amazon.co.uk/gp/help/customer/contact- us
+1 877-485-0385 (US Phone Number)

amazon.com/Denali
MADE IN CHINA

Documents / Resources

| DENALI B09JCQ2LCK 14 Piece Drill and Tap Combo Set [pdf] User Manual
B09JCQ2LCK 14 Piece Drill and Tap Combo Set, B09JCQ2LCK, 14 Piece Drill and Tap Combo Set, Drill and Tap Combo Set, and Tap Combo Set, Tap Combo Set, Combo Set, Set
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

DENALI User Manuals

Related Manuals