sanag T80S Pro Active Noise Cancelling Earphone User Guide
- June 9, 2024
- sanag
Table of Contents
T80S Pro Active Noise Cancelling Earphone
User Guide T80S Pro
FCC ID :2A6MST80S
Product Description and Accessories
Note: The pictures in this manual ore schematic diagrams, and there may be deviations from the actual objects. Please refer to the actual objects. (Thank you for choosing the earphones produced by our company. In order to have a better experience with this product, please read this manual carefully before use. If there are any printing errors or translation errors, I hope users will understand)
Charging Instructions
-
Charging indication
Put the headset into the charging cabin and it will enter the charging state.The ice blue light will keep on and when the headset is fully charged,it will turn to white light and after that all lights will be off. -
Use of the charging compartment
The white light flashes when the charging compartment is charged, and the white light stays on when it is fully charged. -
Battery capacity
300mAh (headset)
300mAh (charging compartment)
Warning: Do not put the rechargeable battery into the fire for proper disposal; The battery shall not be exposed to overheating; Please use the DC 5V power adapter that meets the national standard and posses CCC certification for charging.
Product use
This machine supports the earphone to be picked up from the charging cabin
Automatic startup function
Put the earphones into the charging compartment and turn them off
LED Indicator Status
- 0n/Off: Turn on the white ice blue light flashing alternately, shut down the ice blue light flashing 3.
- Pairing statusAfter pairing, the white ice blue light flashes alternately in the main ear and flashes once every 5 seconds in the secondary ear.
- Bluetooth status: no light flashes.
- During charging: The ice blue light of the earphone stays on. It turns to white light when fully charged and all lights will be off after that.
Description of other scenarios:
1. The headset will shut down automatically without any connection within 5
minutes. 2. Support IOS system headset power display. 3. There is a prompt
tone of “battery low” when the power is low,ond the white light keeps
flashing. There is a prompt tone of “power off” when the power is too low and
about to shutdown automatically,ond the white light flashes for 3 times.
Connection operation
- Pteose make the distance within 1 meter between the headset and your mobile phone(or other device).The doser the better.
- Long press two headphones multi-function key about 3 seconds IA charging from the warehouse to take out the headphones white and blue lights flashing, headphones into TWS matching mode, team success main ear alternating white and blue lights flush, flashing o pair of ear 5 seconds;
- Activate the bluetooth on your device, it will search and please Ind ‘780S Pro” to correct to. The indicators of the headset will be off when the pairing and connection finished.
Headset Name: T80S Pro. After successful pairing and connection, the headset indicator will go out, indicating pairing and connection success. When the connection succeeds, you con make o phone call or listen to a song.
Key function operation
- Power on: long press the multfunctan key for °bout 3 seconds, the prompt sound’s power on, and the white ice blue Flit flashes citernatety.
- Shutdown : Long press the multifunction button for about 5 seconds, the prompt tone will shut down, and the ice blue light will fiosh 3 times.
- Click left and right to play / pause / answer / hang up
- Volume +/ Volume – : Three strikes left ear volume increases, three strikes right ear volume decreases
- Previous / next: double cid: the right ear to switch to the previous voakicuble dick the left ea to switch to the next track
- Reject: long press for 2 seconds to reject the all.
- Phone call :one click to answer/end
- The noise reduction mode: Long press the right ea to enter the permeable mode/rase mode/off mode, and the prompt tone permeable mode/on/off active noise reduction mode.
- Delay mode: Long press the left ea to enter the low latency modefiong press the left ea to exit the law latency mode, and the prompt tone game modelmusic mode.
- Restore factory settings: Under the startup state, hit four times in o row, and the Wile ice blue lamp lights up of the some time. The ice blue lamp flashes for tree times and shuts down, completing the restoration of factory Settings.
Specification parameters
Name: Bluetooth Earbuds
Model: T8OS Pro
Connection range: > 10m
Frequency response- 2OHz-2OKHz
Charging voltage: DC 5V **200mA
Horn specification: 4) 10mm
Executive standard: GB 8898-2011
Earphone battery capacity: 30mAh
Battery capacity of the charging bay: 300mAh
Common problem**
- No sound can be heard through the headphones
- confirm that the headset is working.
- confirm whether the volume of the mobile phone is appropriate.
- confirm whether the headset is connected to the mobile phone successfully.
- confirm whether the earphone is in transmission range.
Poor headset call effect
- Confirm whether the mobile phone is in the area with strong signal.
- there is no barrier between the headset and the mobile phone.
Matters needing attention
- do not use abrasive cleaners to dean this product.
- do not allow the product to be heated or close to a fire source, such as a cocking stove.
- do not expose the product to diect sunlight for o long time.
- do not discard the product in the fire to ovoid explosion.
- do not attempt to disassemble this product to make ony modifications, os it does not contain any maintenance components.
- do not use this product in the rain.
- if you do not intend to use this product fora long time, please store it in a dry environmentAnd charge the headset of least once o month to prolong the service life and avoid extreme temperature and dust.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Any Chonges or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>