PYRAMID CFOA0001 Handguard Extensions Owner’s Manual
- June 15, 2024
- PYRAMID
Table of Contents
**PYRAMID CFOA0001 Handguard Extensions Owner’s Manual
**
DIMENSION INSTRUCTION
Our Pyramid handguard extensions are simple to fit
- Remove the four bolts and collars from the OEM handguards (two on each side). Using the same four bolts and collars, loosely attach the handguard extensions on top of the OEM handguards (see diagram).
- The foam strip provided can be used to protect the OEM handguards from the handguard extensions. Cut the foam strip into four pieces and attach them where necessary (see diagram).
- Once the foam is fitted and the handguard extensions are aligned as required, use a 4mm drill bit to open a hole in the handguard extensions and the OEM handguards. The hole is supposed to be drilled into the rectangular shaped feature on the side of the handguard extensions (see diagram).
- Once the hole is drilled, attach the handguard extensions to the OEM handguards using the two push rivets supplied.
- Check fixings periodically.
Any questions?
sales@pyramid-plastics.co.uk
+44 (0)1427 677990
www.pyramid-plastics.co.uk
Follow us on social media
and feel free to leave us a review!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>