eSTAR 43A1T2 Android LED TV Instruction Manual

eSTAR 43A1T2 Android LED TV

Important Safety Precautions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at Plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments /accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used caution when moving the cart/apparatus combination to avoid injury tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Caution: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
15. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
16. The socket-out shall be installed near the equipment and shall be easily accessible.
17. This product should never be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacture’s instructions have been adhered to.
18. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus.
19. Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
20. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
21. Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times.
22. The USB terminal should be loaded with 0.5 A under normal operation. These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. unless you are qualified to do so.
23. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
24. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth
25. The maximum using environment temperature is 45 degrees. The Maximum using altitude is 2000 meters

TV Buttons And Terminal Interface

TV Buttons
Note : The following is only functional schematic, And the actual position and arrangement of different models may be different.

Terminal Interface
Note : The following are the various terminal interface, the actual position and arrangement, the number of different models may be different.

External device connection diagram

TV Install And Connect

Set your TV
To put your TV on a firm place which can bear the weight of the TV.
To avoid danger, please don’t positions the TV near water or heating place (such as light, candle, heating machine),do not block the ventilation at the back of TV.

Connect antenna and power

1. Connect the antenna cable to the antenna socket on the back of the TV.

2. To plug the power cord of TV (AC 100- 240V~ 50/60Hz).
   Turn on TV

3. Connect the power supply, enter the standby mode (red light), press the power button of the TV or the power button on the remote control to turn on the TV

Note : Picture for reference purposes only.

TV Stand Installation Instructions

1. Open the carton and remove the TV and scattered accessories and base (some models without base).
2. In order to avoid damaging the TV, please cover it with soft mattress, put it on the table, face down on the soft material and screw the neck of the base to the TV.
3. screw the base and connected to the TV.
4. the installation is complete.

Note : Picture for reference purposes only. Please prevail in kind

Initial Installation

The first time you switch the TV on, the initial step screen appears which guides you through the initial process. Please according to the Text Tips to finish initial installation.

Language select ->Press ^/V on remote control to select the language option, then click [OK] to confirm.
Quickly set up your TV with your Android phone? (Continue/skip)

Steps:

1. On your Android Phone, open the Pre-installed app “Google”.
2. Type or say, “Ok Google, set up my device”.
3. Tap the model name on the list.

Configure the network
Select wired or wireless to connect to internet. -›If you select skip, it could be performed in homepage or settings menu.

Google Account Sign in
Sign in to get new apps, recommendations, movies,the Assistant, and more from Google. Two ways to login Google account:

Use your phone or computer

1. Visit androidtv.com/setup on your phone or computer, Make sure your other device is on the same Wi-Fi network as your Android TV T™.
2. Enter the display code on your phone or computer.

Use your remote:
Use the remote to enter your Google account and password to sign in to Google account.

Google setting
In these steps you will setup the Terms of Service, Location, Help improve Android, Google Assistant and additional Google functions.

Play Auto Installs
Select install or un-install the recommended apps and Google apps by using this process.

Press “Continue” to the next setting page.

Pairing Bluetooth Remote
Press ‘BACK ® and VOL-® ‘ simultaneously on remote control to enter the Bluetooth pairing mode.
The Indicator light on remote control will flash when enter the pairing mode.

• Press [OK] to begin pairing.
• Press on remote control to skip the pairing mode.

Country select
Press A/V on remote control to select the country option, then click [OK] to confirm.

Set the TV password for Parental Controls, “0000” is invalid.
Select TV mode(Home/Retail) Home mode is optimized for efficient energy usage for home use. Retail mode is optimized to store demo with fixed settings.

Chromecast built-in T™
Select On/Off to make Chromecast built-in available.

TV Channel Setting

• Select Antenna/Cable/Satellite to scan TV channel.
• If you select skip, the channel scan could be performed in menu.

HOME

When initial setup is complete, the TV will enter the homepage by default, or press on remote control to display the homepage.

• Press A/V/< / > on remote control to switch between Google Assistant, Apps, Play Next, Netflix, YouTube, and more on the Homepage.
• Press [OK] to enter.

1. Google Assistant
   Use your voice to jump to shows, control devices, and more-with Google Assistant.

2. Apps
   List of downloaded and pre-loaded apps on your device.

3. Play Next
   Based on your watch history and includes next episode in a series or unfinished movies.

4. Settings
   Manage apps and TV controls, change preferences, sounds, and account.

5. Favorite apps
   Quick access to frequently used apps.

6. Channels
   For easy content discovery.

Settings

Allows to set various performance of your TV .

• Press < / > on remote control to select “Settings” which is in the upper right corner of the screen.
• Press A/V on remote control to select the option which you want to adjust in the Settings menu.
• Press [OK) to enter.

Network & internet
Adjust all network setting and check connection if you have connection problems.

• Press ^/V on remote control to select “Network & internet” in the settings menu.
• Press ^/V on remote control to select: Wi-Fi/Add new network/Scanning always available/Proxy settings/P settings.

Channel

• Press A/V on remote control to select “Channel” menu.
• Press [OK] to enter “Parental Controls”, then click ^/V or use the number buttons on remote control to enter your PIN(Password for Parental Controls).

Device Preferences

• Press A/V on remote control to select “Device Preferences”.
• Press A/V on remote control to select the options of About, Date&time, Timer, Language, Inputs, Picture, Sound, Google Assistant, Reset, etc.
• Press LOK to jump to the corresponding sub-option.

About

• Press ^/V on remote control to select “About”.
• Press A/V on remote control to check additional information such as System update, Device name, Restart, Status, and more.
• Press on remote control to return to the previous menu. Press on remote control to exit the menu.

Reset
If select reset, it will erase all data from your device’s internal storage, including your Google account, System and app data and settings, and downloaded apps.

• Press ^/V on remote control to select “Reset”.
• Press A/V on remote control to select “Cancel” or “Erase everything”.

App Install/Move/Uninstall

• Press A/V on remote control to select “Apps” on Homepage, then click [OK) to enter.
• Select “Get more apps” and input app name.
• Select “search” which is in the upper right corner of the page.

Example for “Facebook”

1. Install
   Input “Facebook”, find “Facebook” App will show in the list, then click [OK] to select it.
   Select “Install”, when completed select to open or Uninstall.

2. Move
   Select “Facebook”, press and hold [OK] on remote control, then click A/V on remote control to select “Move”.
   Press A/V < > on remote control to move, then click [OK] to confirm.

3. Uninstall
   Select “Facebook”, press and hold [OK] on remote control, then click A/V on remote control to select “Uninstall”.
   press [OK) to uninstall.

TV Source setting

The way to enter TV source in Homepage:
Press G on remote control or Select “Live TV” on Homepage.

Press on remote control.
Press ^ on remote control to select “Channels” and select “New Channels Available” to enter.

Help

Do not leave your TV displaying a static image, whether it is from a paused video, menu screen, etc. for an extended period of time, doing so will damage the display and may cause image burn-in.

Specifications

Remote control

Disclaimer : Google Assistant is not available in certain languages and countries

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>