VIVO PP-DK30B-2 Steel Clamp on Desk Pegboard Instruction Manual
- June 15, 2024
- Vivo
Table of Contents
Black Clamp-on Pegboard Panel (x2)
Instruction Manual
PP-DK30B-2 Steel Clamp on Desk Pegboard
SKU: PP-DK30B-2
Scan the QR code with your mobile device or follow the link for
helpful videos and specifications related to this product. https://vivo-
us.com/products/pp-dk12b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
ASSEMBLY OPTIONS:
Option B:
Below Desk Cable Management Page 9
ASSEMBLY OPTION A: Above Desk Mounting
Pre-Assembly
0 – 2″ / 0 – 51mm Desktop Thickness: No pre-assembly required. Proceed to STEP
-
1.1 – 3″ / 28 – 77mm Desktop Thick: Follow steps below.
-
Use a Phillips screwdriver to remove screws separate Lower Clamp (A1) from Support (A).
-
Remove the center screw to disassmble Lower Clamp using a Phillips screwdriver. Flip Clamp Plate (A2) as shown and reassemble Lower Clamp.
-
Reconnect Lower Clamp (A1) to Support (A) using a Phillips screwdriver.
STEP 1
Connect Pegboard (B) to Supports (A) by installing M6x16mm Screws (S-A) and M6
Washer (S-B) through pegboard into threaded holes of Supports (A) using 4mm
Allen Wrench (T-A). This can be done in a portrait or landscape orientation.
See examples below.
STEP 2
Install Clamp Pads (D) on the Clamps (A1) on Supports (A). Tighten Clamps (A1)
to attach to desired surface. Use Zip Ties (E) to secure cables along Supports
(A).
STEP 3
Install accessories (C, F thru J) onto assembled pegboard. See images on next
page for placement.
Accessory Placement
ASSEMBLY OPTION B: Below Desk Cable Management
STEP 1
To mount belowdesktop, the Clamp on Supports (A) will first need to be
removed. The Clamp will be re-installed to the pegboard and used to secure
pegboard below desktop.
DISASSEMBLE SUPPORTS (A):
Remove M6x6mm Screws (A2) and M6x8mm Screws (A3) from Clamp (A1) to remove
Clamp Bolt (A4) using 4mm Allen Wrench (T-A).
STEP 2
Connect Clamp Bolt (A4) to Clamp (A1) using previously removed M6x8mm Screws
(A3) and 4mm Allen Wrench (T-A).
STEP 3
Secure Clamp (A1) to desktop surface. Zip Ties (E) can be used to manage
cables on assembled pegboard.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 10/31/2023 REV1.1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:www.vivo- us.com