QCY H3 Wireless Noise Cancelling Headset Instruction Manual

QCY H3 Wireless Noise Cancelling Headset

FAQ

• Q: How do I download the QCY app?
• A: To download the QCY app, please scan the provided QR code before starting up the headset.
• Q: How do I switch between ANC modes?
• A: Press the ANC button on the headset to switch between ANC ON, ANC OFF, and Transparency modes. In ANC ON mode, you can double press the ANC button to turn on/off ANC Adaptive.
• Q: Can I connect the headset to multiple devices simultaneously?
• A: Yes, the headset supports a multi-point connection. Please refer to the “Multi-Point Connection” section for detailed instructions.
• Q: How do I reset the headset to factory settings?
• A: To reset the headset to factory settings, please follow the instructions provided in the “Factory Setting” section.

Overview

• The above pictures are for reference only yet practical products may vary.

How to Connect

• Power on the headset and it will auto-turn connectable. On the phone, search QCY H3 and tap to connect. (It will auto-reconnect to the last device in the connectivity record, if any. If you need to make it turn connectable again, power it on and press and hold MFB for 4s.)

Multi-Point Connection

• Connect the headset to Device A then turn off its Bluetooth and the headset will auto-turn connectable(LED blinks red and blue).
• On Device B, search QCY H3 and tap to connect.
• Once again turn on Bluetooth on Device A and connect it to the headset.

Factory Setting

• Power on the headset, press and hold both volume + and – for 10s or until the LED blinks red 3 times to reset it factory. It will then auto-turn connectable.

LED

• Connected: LED blinks white every 10s
• Charging: LED glows solid red
• Top-up: LED glows solid white

Functions

• Power-on: Hold MFB for 2s
• Power-off: Hold MFB for 4s
• Answer/end call: Press MFB
• Ignore call: Hold MFB for 1.5s
• Skip track backward: Hold Volume- for 1s
• Skip track forward: Hold Volume+ for 1s
• Volume up: Press Volume+
• Volume down: Press Volume-
• Voice assistant: Triple press MFB
• Playback/pause: Press MFB
• Gaming mode: Double press MFB
• Switch mode: Press the ANC Button to switch between ANC ON, ANC OFF and Transparency.

In ANC ON, doubel press ANC Button to turn on/off ANC Adaptive.

Warranty Card

Warranty Period

• 12 months after you purchase this item (or you may inquire with your local shopper for more details).

Free Service

• Supposing any defects caused by quality issues occurring within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Model Number:

Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:

Free exchange service will not be accessed under the following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return it to us or your distributor for free repair.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Tips

1. Before using the headset, please read the manual carefully and keep it for future reference.
2. The headset needs to be fully charged before first use.
3. If the headset is left unused for over two weeks, please recharge.
4. Please use the chargers made by a qualified manufacturer.
5. If the headset fails to be found by phone, please return them connectable or restore factory settings. If a program error in the phone occurs, please turn on on Bluetooth function or reboot the phone.

Caveats

1. Never disassemble or modify your headset for any reason to avoid any damage and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use the headset during a thunderstorm to avoid dysfunction and increasing risk of electricshock.
5. Do not use harsh chemicals or strong detergents to clean the headset.

Note: please do not use the headset for a long time as may damage your hearing.

CONTACT

• Manufacturer: Dongguan Hele Electronics Co., Ltd.
• Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City
• Guangdong Province China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>