BLAUPUNKT GTX350PRO 2 Way Coaxial Speaker Instruction Manual

June 15, 2024
Blaupunkt

BLAUPUNKT GTX350PRO 2 Way Coaxial Speaker

BLAUPUNKT-GTX350PRO-2-Way-Coaxial-Speaker-PRODUCT

Product Information

  • Specifications
    • Model: GTX350PRO
    • Size: 3.5″
    • Impedance: 4 Ohms
    • Frequency Response: 120Hz ~ 20KHz
    • SPL (dB-1/w/1M): 90dB
    • Power Rating (RMS): 70 Watts
    • Power Rating (Peak): 200 Watts

Product Usage Instructions

  • Installation
    • Choose a suitable location in your vehicle to install the GTX350PRO speakers.
    • Ensure that the mounting surface is clean and free from any debris.
    • Connect the speaker wires to the appropriate terminals on the back of the speaker.
    • Securely mount the speakers using the provided screws or mounting brackets.
  • Wiring
    • When wiring the GTX350PRO speakers, follow these steps:
    • Determine the appropriate gauge of speaker wire based on the distance between the speakers and your audio system.
    • Cut the speaker wire to the required length, ensuring you have enough wire to reach both speakers.
    • Strip approximately half an inch of insulation from each end of the speaker wire.
    • Connect one end of the speaker wire to the positive (+) terminal of the speaker and the other end to the corresponding positive (+) terminal of your audio system.
    • Repeat the previous step for the negative (-) terminals.
  • Usage
    • To use the GTX350PRO speakers:
    • Ensure that your audio system is turned off before connecting the speakers.
    • Connect the speakers to your audio system using the wiring instructions provided above.
    • Turn on your audio system and adjust the volume to a comfortable level.
    • Test the speakers by playing different types of audio to ensure they are functioning properly.
    • Make any necessary adjustments to the speaker positioning or audio settings to optimize the sound quality.
  • FAQ (Frequently Asked Questions)
    • What is the maximum power rating of the GTX350PRO speakers?
    • The GTX350PRO speakers have a maximum power rating of 200 Watts.
    • What is the impedance of the GTX350PRO speakers?
    • The impedance of the GTX350PRO speakers is 4 Ohms.
    • Where can I find more information about BLAUPUNKT products?
    • You can visit the BLAUPUNKT website at www.blaupunkt.com for more information about their products.
    • Is the device compliant with FCC Rules?
    • Yes, this device complies with part 15 of the FCC Rules.
    • What should I do if I experience interference with the device?
    • If you experience interference, ensure that the device is not causing harmful interference itself.
    • If the interference persists, try adjusting the positioning of the device or consult the user manual for further troubleshooting steps.
    • What does the warning about cancer and reproductive harm mean?
    • The warning about cancer and reproductive harm complies with California’s Proposition 65, which requires businesses to provide a clear warning about potential exposure to certain chemicals that may cause cancer, birth defects, or other reproductive harm.

Features

  • High-Quality Polypropylene Cone
  • Foam Surround
  • High-Temperature Aluminium Voice Coil
  • Ceramic Magnet
  • Mylar Tweeter

Specifications

  • Model GTX350PRO
  • Size 3.5″ 2-Ways
  • Impedance 4 Ohms
  • Frequency Response 120Hz 20KHz
  • SPL (dB-I/w/l M) 90dB
  • Power Rating (RMS) 70Watts
  • Power Rating (Peak) 200Watts

Mounting

NOTE:

  • BLAUPUNKT strongly recommends that you operate your system at low volume levels before the completed installation Of your BLAI_JPUNKT speakers.
  • This will allow you to test the subwoofers before permanently securing the speakers to your vehicle.
    • CAUTION: Make sure that all of the speaker’s wiring is fully protected from cuts, tears, and possible wear. Any short circuits created from cuts, tears, or wear could severely damage the source unit or amplifier. Make sure all speaker wires easily reach the speaker terminal with no stress on the wire or connectors.
    • IMPORTANT: Never cut any metal that is an integral part of the vehicle’s safety or structural support system. If you are unsure Of the importance Of any components of your vehicle, it is recommended that you have your speakers professionally installed.

CHOOSING A LOCATION:

  • It is always best to plan the complete installation before attempting to install any product. The routing of wires, power connections, and mounting locations should be planned first. As with any car stereo installation, all work performance should be checked thoroughly and carefully before the operation of the system.
  • The placement of your BLAUPUNKT speakers within your vehicle will greatly affect the overall performance Of your audio system. Every model Of a car is different, so installation into your vehicle may not be possible without modification. Refer to your vehicle’s manual for more information about your vehicle’s sound system.

BLAUPUNKT

  • speakers are designed to fit in almost any factory location. Again, if at all possible, it is recommended that you use a factory location. This applies mostly to later-model cars.
  • For those earlier models that do not have factory locations or are limited to just front speakers, it is recommended that you choose a location with a sufficient amount of air space.
  • If you allow an insufficient amount Of air space, the subwoofer may not produce low frequencies very well.
  • It is recommended to mount the speaker in the door panels, kick panels, rear decks, etc. The speakers should be mounted where it will be in an enclosed airspace. This will allow for extended bass response.

COAXIAL SPEAKERS INSTRUCTION

GTX350PRO COAXIAL SPEAKERS INSTRUCTION MANUAL

  • Thank you for purchasing the BLAUPUNKT speaker.
  • Throughout the years, we have used our engineering expertise, craftsmanship, and critical testing procedures to create a wide range of audio products that deliver all of the clarity and richness you deserve in your motor vechicle.
  • For maximum performance, it is recommended that you have your BLAUPUNKT product installed by a certified installer.
  • Please read the operation manual carefully before installing or using this device. keep this manual, your reciept Of purchase, and the original box for future reference.
  • If after reading this manual, you still have questions regarding your product, we recommend that you see your nearest BLAUPUNKT dealer

WARNING

  • Continuous, excessive exposure to sound pressure levels in excess of 85dB can cause hearing loss.
  • While BLAUPUNKT sound systems are capable of producing sound pressure levels greater than 85dB, they are also designed for enjoyment at reasonable levels.
  • Please observe all local sound ordinances while listening to your BLAUPUNKT sound system.

Dimensions

BLAUPUNKT-GTX350PRO-2-Way-Coaxial-Speaker-FIG-1

Troubleshooting

If you start having problems with distorted sound Or loss of performance after installing your subs, you can follow the instructions below to try and locate what is causing the problem.

  1. If you have any distorted sound, loss of performance, or rattling from your subs, check the connections running from your amplifier or other processors to the box. You will also want to check the connections inside the box to make sure no wires have become unhooked or are loose.
  2. If the above does not solve the problem, check your enclosure thoroughly to see if there are any leaks, cracks, or broken pieces. Any loss Of structural integrity In your enclosure can cause significant performance loss and distortion.
  3. The next step you can take is to remove the subs and look for any burned wire leads or separated components. You can normally smell something burning when a sub blows or is going bad. Sometimes when you play subs too hard for too long, they will start to heat up.
  4. If none of the above steps solve the problem, you will want to Start looking at the Other components in the vehicle. Start by checking all connections to and from the box, amplifier, source unit, or any other processors you may be using. You will need to reference that particular manufacturer for any setting configurations or troubleshooting.

Warning:

  • Investigate the layout of your automobile thoroughly before drilling or cutting any holes.
  • Take care when you work near the gas tanks, gas lines, hydraulic lines, and electrical wiring.
  • Attach the system securely to the automobile to prevent damage, particularly in the event of an accident. Do not mount the system so that the wire connections are unprotected or are subject to pinching or damage from nearby objects.
  • The +12V DC power wire must be fused at the battery-positive terminal connection.
  • Before making or breaking power connections at the system power terminals, disconnect the +12V wire at the battery end.
  • Confirm your radio/head unit or other equipment is turned off while connecting the input jacks and subwoofer terminals.
  • If you need to replace the power fuse, replace it only with a fuse identical to that supplied with the system. Using a fuse Of different types or ratings may result in damage to this system.

CONTACT

  • BP Americas Corp.
  • 9590 NW 40th St. Road
  • Doral, FL 33178
  • www.blaupunkt.com.
  • 3.5” 200 Watts Max. Power

BLAUPUNKT

  • All Rights Reserved.
  • This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that my cause undesired operation.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals