SC T HE01F-4K Compact 4K HDMI Fiber Extender User Manual
- June 4, 2024
- SC T
Table of Contents
SC T HE01F-4K Compact 4K HDMI Fiber Extender
Introduction
HE01F-4K is an HDMI extender that uses a single fiber optic cable with LC connections to transmit uncompressed 4K 30Hz HDMI signals, with EDID and HDCP signals supported for both multi-mode and single-mode fibers. This small compact size allows you to easily finish installation for any audiovisual applications.
Features
- Resolution up to 4K@30Hz.
- Transmission distance up to 1KM over single-mode fibers, 300m over multi-mode fibers.
- Built-in LC Fiber Connector.
- Supports EDID bypass.
- Low latency.
- Plug & Play, USB powered.
Installation view
Transmission Distance
Fiber Module | Max. Distance |
---|---|
Multi-mode | 300 M |
Single-mode | 1 KM |
Panel view
No | Interface | Description |
---|---|---|
1 | HDMI Type-A Connector | To connect an HDMI device |
2 | LED Indicator | To indicate power & Link status |
3 | LC Optical Connector | To connect a single/ multi-mode fiber cable |
4 | Micro USB Connector | To input 5V 2A power |
Installation Guide
- Connect HE01FT-4K (The transmitter) to an HDMI source.
- Connect the optical fiber cable to HE01FT-4K.
- Power on HE01FT-4K from the micro-USB port.
- Connect HE01FR-4K (The receiver) to an HDMI device.
- Connect the optical fiber cable to HE01FR-4K.
- Power on HE01FR-4K from the micro-USB port.
LED Indication
Transmitter/Receiver | LED Status | Status |
---|
HE01FT-4K (Transmitter)
| Off| Not powered
Red| Powered, but no HDMI input
Purple| Powered and HDMI input detected
HE01FR-4K (Receiver)| Off| Not powered
Red| Powered, but no data transferred from transmitter
Purple| Powered and data received from transmitter
Caution
- The product DOES NOT support CEC due to EDID pass-through. Tosupport CEC, please contact us for customization.
- This product is designed for indoor applications. If it is desired for outdoor use, please install additional equipment for waterproof protection and surge protectors to prevent damages caused by lighting.
- Both transmitter and receiver have to be powered through a micro-USB port.
- Kindly use high-quality OM3 fiber optic cable or upgrade to OM4 fiber optic cable while using multi-mode to reach the 300M extension, or the signal would probably degrade causing abnormal images.
- Do not put anything on the power and system cables, place them where they cannot be stepped on. Please be sure there is nothing resting on any cables.
- Avoid using this product close to water places, or near high temperature devices such as radiators, stoves, etc.
- Using standard and certified optical fiber cables to transfer high-resolution video is recommended.
- Shut down the power supply and unplugged all equipment immediately if:
- water or any kind of liquid has been spilled into the product;
- the product has been damaged by external force
- the product does not operate normally as this manual indicates
- Please contact us for further repair if above conditions happen
What’s In the Package
No | Item | Qty |
---|---|---|
1 | HE01FT-4K | x 1 |
2 | HE01FR-4K | x 1 |
3 | 5V 2A Power Adapter | x 2 |
4 | Micro USB to USB cable 1M | x 2 |
Specification
Model | HE01FT-4K | HE01FR-4K |
---|
Compliance
Standard| HDCP 1.4, 3D, DDC
Video Resolution| 4K@30Hz 4:4:4
Data Rate| 10Gbps
Transmission Distance| 1 KM over single-mode fiber 300M over multi-mode fiber
Wavelength| 1310nm| 1550nm
Ports & Interfaces
Video Input| 1 x HDMI Type-A| 1 x LC Fiber Connector
Video Output| 1 x LC Fiber Connector| 1 x HDMI Type-A
Power Input| 1 x Micro USB| 1 x Micro USB
Power
Power Supply| 5V 2A| 5V 2A
Power Consumption| < 1.5W| < 1.5W
Ambient Temperature
Operation| -20 to 70℃
Storage| -40 to 80℃
Operating Altitude| 2000m
Humidity| Up to 95%
Physical Characteristics
Dimension| 79 x 20 x 10mm| 79 x 20 x 10mm
Weight| 52g| 52g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>