SC T HE03 HDMI CAT5e Extender with HDMI Loop Out 150M User Manual
- June 6, 2024
- SC T
Table of Contents
HDMI over IP Extender
User Manual
Model: HE03
HDMI CAT5e Extender with HDMI Loop Out 150M
Smart Cabling & Transmission Corp.
Introduction
HE03 is an HDMI extender that can use a cost-effective Ethernet cable to send HDMI signal for up to 150M with a resolution up to 1080p@60Hz. Its TX unit has a loop out port that can connect an extra HDMI display. The extender applies AV over IP technology, which can work with Ethernet switches to split an HDMI signal into multiple ones.
Features
- Resolution up to 1080p@60Hz.
- Signal extension up to 150M over CAT5e (or greater) cable.
- Built-in local loop-out port for an extra HDMI display at TX side.
- Workable with Ethernet switches for point-to-many HDMI transmission.
- Workable with SR01X (IP repeater) for long distances.
Installation view
Optional Model: SR01 Signal Repeater (order separately)
- Extend data signal for an additional 120meters.
- Application for HE03T signals for extra-long range transmission.
- Ability to cascade connection with multiple SR01 for long-range transmission
- Built-in LED status indication.
- External power required.
- Plug and play for easy installation.
Work with HE03 CAT5e Extender
Economic HDMI over IP Extender, support point to many connections via a network switch
Panel View
- Transmitter
- Receiver
LED Indication Status
Green LED: ON Power on
RJ45 LED: Orange Flash (Data transmission)
Green on (linking)
Cable
Link Cable use high quality Cat.5e UTP/STP/FTP or Cat.6 UTP cable
RJ45 Define
Link Cable (TIA/EIA-568-B)
| 1. Orange-white | Data 1 + |
|---|---|
| 2. Orange | Data 1 – |
| 3. Green-white | Data 2 + |
| 4. Blue | Data 3 + |
| 5. Blue-white | Data 3 – |
| 6. Green | Data 2 – |
| 7. Brown-white | Data 4 + |
| 8. Brown | Data 4 – |
Computer IP Address Setting
System default IP address is 192.168.168.55 for HE03T, 192.168.168.56 for
HE03R (subnet mask 255.255.255.0), Your computer must set in same subnet mask
to enter the web setup page.
To change the IP address of computer please follow below step: (based on
Windows XP):
Right click on “My Network Place” → “Properties” then right click on “Local
Area Connection” → “Properties” then double click on “Internet Protocol
(TCP/IP)” to setting as below:
(IP address 192.168.168.1, sub mask 255.255.255.0)
Login in to the web
Use CAT5e cable to connect transmitter/receiver RJ45 port to PC LAN port,
enter the IP address of TX/RX in the web browser.
After login to the web, click System Settings you can change IP address,
Subnet Mask, MAC address at System page, then click Apply to finish setting.
Specification
| ITEM NO. | HE03T | HE03R |
|---|
Support
Compliance| HDMI 1.3b, HDCP
Max. Video Resolution| 1080p@60Hz
Max. Transmission Distance| 150M over CAT5e, 160M over CAT6 cable
Ports & Interfaces
Video Input| 1 x HDMI Type A| 1 x RJ45
Video Output| 1 x RJ45| 1 x HDMI Type A
Video Loop-out| 1 x HDMI Type A|
Power
Power Supply| DC 5V 2A| DC 5V 2A
Power Consumption| 1200mA| 700mA
Ambient Temperature
Operation| -20 to 60℃
Storage| -20 to 85℃
Humidity| up to 95%
Physical Characteristics
Dimensions| 67 x 170 x 27mm| 67 x 130 x 27mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>