SC T UE03H USB Keyboard Mouse Extender over HDBase HDBase User Manual
- June 1, 2024
- SC T
Table of Contents
SC T UE03H USB Keyboard Mouse Extender over HDBase HDBase
Introduction
UE03H is a USB 3.2 Gen1 extender designed to carry USB signals using CAT6a/7 Ethernet cable. It is totally backward compatible with USB 2.0 & USB 1.x devices. It is perfect for multiple applications including devices such as USB cameras, touch panels, and any other USB devices.
Features
- USB 3.2 Gen1 up to 5Gbps
- Transmission distance up to 100m with CAT6a cable
- No power needed at device side (UE03HR)
- Max power supply 5V/1.5A at Device side (UE03HR), does not support QC(Quick Charge), PD(Power Delivery)
- RS232 optional extension
- Compatible with USB 2.0 and USB 1.x devices
- USB Type-C port on both sides
- Plug & Play
- Small & compact, easy to install
- Low power consumption
- Multiple mounting options (Wall/Rack & Din Rail)
Application Diagram
USB Extension for General Purposes
USB Extension for Security/Monitoring
USB Extension for Video Conferencing
USB Extension for Video Capture
USB Extension using DisplayLink
Panel View
UE03HT
Interface | Description | |
---|---|---|
1 | HD Base T | To connect to UE03HR |
2 | RS232 | To connect to RS232-command-controllable device (needs Terminal |
Block to RS232)
3| USB Type-C| To connect to USB 3.2 Gen1 source
4| Power/Link LED| Refer to LED Indicator
UE03HR
Interface | Description | |
---|---|---|
1 | DC Jack | To plug in DC 12V power adapter |
2 | Console | To update FW (needs 3.5mm jack cable to UART) |
3 | RS232 | To connect to RS232-command-controllable device (needs Terminal |
Block to RS232)
4| HD Base T| To connect to UE03HT
5| USB Type-C/Type-A| To connect to USB device, compatible with USB 3.2 Gen1 /
2.0 / 1.1 / 1.0
6| Power/Link LED| Refer to LED Indicator
LED Indication
Interface | LED Color | Status |
---|---|---|
Power (Green) | On | Power On |
Off | Power Off | |
Link (Blue) | On | RJ45 Linked |
Off | RJ45 Unlinked |
RS232 Pin Define
Transmission Distance
See Caution, point 6
Cable Type | Transmission Distance |
---|---|
CAT6a 83G02HD105 | 100m |
USB Read & Write Speed
Testing Condition| Using CAT6a cables and Crystal Disk Mark software, testing
the read and write speed of USB flash drives. PC:i5-12400 RTX3060Ti
---|---
ESD310C USB 3.2/Type C 256GB| SanDisk SDDDC3 (Type A) (USB 3.0)| SanDisk
SDDDC3 (Type C) (USB 3.0)| SanDisk Ultra Flair USB 3.0 64GB (Type A) (USB
3.0)| KINGSTON (Type A) (USB 3.0)
Read| Write| Read| Write| Read| Write| Read| Write| Read| Write
100m 83G02HD105| 439.58 MB/s| 437.74 MB/s| 152.18 MB/s| 65.84 MB/s| 155.16
MB/s| 65.49 MB/s| 162.16 MB/s| 52.43 MB/s| 136.56 MB/s| 11.31 MB/s
Caution
-
This product is designed for indoor applications. If it is desired for outdoor use, please install additional equipment for waterproof protection and surge protectors to prevent damages caused by lighting.
-
Do not put anything on the power and system cables, place them where they cannot be stepped on. Please be sure there is nothing resting on any cables.
-
Avoid using this product close to water places, or near high temperature devices such as radiators, stoves, etc.
-
Shut down the power supply and unplugged all equipment immediately if:
A. water or any kind of liquid has been spilled into the product;
B. the product has been damaged by external force;
C. the product does not operate normally as this manual indicates;
D. Please contact us for further repair if above conditions happen. -
We strongly recommend using high quality CAT6a, CAT7 UTP/STP/FTP cable. Improper installation may cause unstable connection.
-
The transmission distance may differ by cable or construction quality. Using CAT6a, CAT7 cable between transmitter and receiver, the transmission distance can reach up to 100 meters.
-
This extender does not support video & audio transmission (DP alternate mode).
-
RS232 does not support hardware handshake.
-
The USB-Type C port on the device side does not support power delivery mode
Technical Specification
UE03H | UE03HT | UE03HR |
---|
Compliance
Standard| USB 3.2 Gen1
USB 2.0
USB 1.1
USB 1.0
Max. Transmission Distance| 100m over CAT6a/7
Ports & Interfaces
USB Data| 1 x USB Type-C| 3 x USB Type-A
1 x USB Type-C
Transmission Medium| 1 x RJ45| 1 x RJ45
RS232| 1 x 3-Pin Terminal Block| 1 x 3-Pin Terminal Block
Console| | 1 x 3.5mm Phone Jack
Power
Power Supply| USB 5V| 12V 1.5A
Power Consumption| 2W| 2.76W (No include USB device)
Power Saving| 1.6W| 1.8W
Ambient Temperature
Operation| 0 to 55°C
Storage| -40 to 80°C
Operating Altitude| 2000m
Humidity| Up to 95%
Physical Characteristics
Dimension| 50 x 93 x 32mm| 87 x 123 x 32mm
Weight| 128g| 259g
Installation
Installed on Wall
Step 1 Same way as “ Installed on a Platform ”, but need to put screw
plugs into the pilot hole before inserting the screws (leave 2mm space from
the platform)
Installed on a DIN-rail
Step 1 Use machine screws to fix a DIN-rail mounting plat on the side of
your product
Step 2 Install your product on a DIN-rail as following instruction
Installed on a Rack
Step 1 Lock machine screws in the rack
Step 2 Put your products on the rack
Step 3 Push the products to the other side of the rack
Step 4 Install the rack in a cabinet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>