SC T HAE01 4K60Hz HDMI Audio Extractor with Up/Down Scaler User Manual
- June 6, 2024
- SC T
Table of Contents
SC T HAE01 4K60Hz HDMI Audio Extractor with Up/Down Scaler
Model : HAE01
4K60Hz HDMI Audio Extractor with Up/down Scaler
Introduction
HAE01 is an HDMI multifunctional tool allowing you to extract HDMI audio to integrate external audio equipment, such as amplifiers, AV receivers, etc. Additionally, the up/down scaling function, which converts 1080p signal to 4K, or 4K signal to 1080p, allows you to save extra cost on a new HDMI monitor. Last but not least, the 5-way joystick switch can enable you to operate and setup functions efficiently.
Features
- Resolution up to 4K@60Hz 4:4:4.Built-in dual HDMI outputs.
- Built-in Toslink (digital audio) and 3.5mm phone jack (analog audio) interfaces.
- Supports resolution up/down scaling function.
- Supports chroma resampling function, 4K HDMI 4:4:4/ 4:2:2 to 4:2:0 conversion.
- Supports HDCP 2.2 to 1.4 conversion.
- Supports HDMI audio extract for integrating with external audio equipment.
- Supports OSD menu to check functions & modes.
- Supports EDID management.
Installation View
Application 1
4K HDMI Audio Extrator
Application 2
4K HDMI Up/Down Scaler with Audio Extractor HDCP 2.2 to 1.4 and 4:4:4 to 4:2:0
and Up/Down Scale Capable Full OSD operation for all setup/EDID management
5 way Joystick Switch Function
MENU
| Main Menu | Sub Menu | Sub Menu Function |
|---|---|---|
| OUTPUT 1 MODE | NORMAL | Output video same as input Video |
| UPSCALE | 1080P Upscale to 4K | |
| EXIT | Exit Sub Menu | |
| OUTPUT 1 SUBSAMPLING | NORMAL | Output color subsampling same as Input |
| 4:4:4 à4:2:0 | 4K6G 4:4:4/4:2:2 convert to 4K3G 4:2:0 | |
| NORMAL | Output color subsampling same as Input | |
| OUTPUT 1 AUDIO MODE | OUTPUT 1 AUDIO MODE | Audio Selection |
| NORMAL | audio output | |
| MUTE | No audio output | |
| EXIT | Exit Sub Menu | |
| OUTPUT 2 MODE | AUDIO ONLY | Audio output only |
| DOWNSCALE | 4K downscale to 1080P | |
| SPLITTER | Distribution Mode（Output signal same as OUTPUT 1） | |
| EXIT | Exit Sub Menu | |
| EDID(VIDEO) | AUTO | Use OUTPUT 1 EDID as priority, if OUTPUT 1 and OUTPUT |
2
not connected with TV, Default as 4K
OUTPUT 1| Use OUTPUT 1 EDID
OUTPUT 2| Use OUTPUT 2 EDID
PRESET 4K| Default 4K 60Hz 8bit
PRESET 1080P| Default 1080P 60Hz 8bit
EXIT| Exit Sub Menu
EDID(AUDIO)| AUTO| Use OUTPUT 2 as priority, If OUTPUT 1 and OUTPUT 2
not
connected with TV, Default as LPCM 2.0
OUTPUT 1| Use OUTPUT 1 EDID
OUTPUT 2| Use OUTPUT 2 EDID
MULTI| Default AC3 and DTS Audio format
LPCM 7.1CH| Default LPCM 7.1 CH Only
LPCM 2CH| Default LPCM 2CH Only
EXIT| Ext Sub Menu
MISCELLANEOUS| Main MCU : Vx.xx| Show firmware version
EXIT| | Exit MENU
Panel View
LED Indication
| Color | LED |
|---|---|
| GREEN | Power |
| BLUE | Output 1 |
| RED | Output 2 |
DB9(F)/3.5mm STEREO PHONE JACK DB9(F)/3.5mm STEREO PHONE JACK
| RS232 | 3.5 mm Phone Jack |
|---|---|
| Footprint | Define |
| Pin 2 | TX |
| Pin 3 | RX |
| Pin 5 | GND |
Trouble Shooting
- CEC function only works Output 1.
- Any HDMI output with HDCP2.2 compatible issues will cause HDMI no video output, Under HDCP 2.2 mode: any one monitor HDCP authorization failed will cause no video status, other connecting monitors will be also failed. Then monitor testing must be one by
- Up/down scale mode only support resolution conversion, frequency will be not changed.
- Under HDMI 2.0 mode, must use Premium certified HDMI cable.
HAE01 Package Include
HAE01 x 1 pcs
DC5V 1Amp Power Adapter x 1 pcs
DB9 (0F)/3.5mm STEREO PHONE JACK x 1 pcs Mounting Screw pack x 2 bags
Specification
| ITEM NO. | HAE01 |
|---|
Support
Compliance| HDMI 2.0, HDCP 2.2, 3D, HDR
Max. Video Resolution| 4K@60Hz 4:4:4
Video Bandwidth| 18 Gbps
Audio Format| 7.1 LPCM 192KHz, Dolby TrueHD, DTS-HD MA
Ports & Interfaces
Video Input| 1 x HDMI Type A
Video Output| 2 x HDMI Type A
Digital Audio| 1 x TOSLINK
Analog Audio| 1 x (3.5mm) Phone Jack
RS232 Interface| 1 x DB9 Female / 3.5mm Stereo Phone Jack (Firmware Update)
Power
Power Supply| DC 5V 1A Regulated
Power Consumption| 4W
Ambient Temperature
Operation| -10 to 45℃
Storage| -30 to 70℃
Humidity| Up to 95%
Physical Characteristics
Dimensions| 109.6 x 110.5 x 36mm
Weight| 270g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>