PEUGEOT EnergySaw-254SB Sliding Electric Mitre Saw User Manual
- June 15, 2024
- Peugeot
Table of Contents
EnergySaw-254SB
EnergySaw-254SB Sliding Electric Mitre Saw
USING MANUAL (Original manual translation):
Sliding electric mitre saw
A mitre saw is used to make precise simultaneous angled and bevelled cuts,
without any risk of the blade slipping – very useful for making picture frames
and for decorative work such as wood panelling or flooring.
The more teeth the blade has, the finer the cut.
The radial function, if your machine has it, means that you can cut wider
pieces, for example: parquet strips, shuttering boards, shelves, etc.
The laser, if your machine has one, produces a beam of light which shows you
where the blade will go.
Look for a machine whose cutting capacities are suited to the kind of work you
are doing.
FIG. A & B
FIG. C
FIG. D
Extensions blocking screw
Repeat operation for the other side
Anti-tipping mechanism
FIG. E
Switch left and right handed
Radial
function: increased cutting capacity
Firmly hold the workpiece. Lowering his head slowly, and saw the
piece of wood at a steady speed (without jerk).
Wait the complete stop of the blade before pull up the machine head
slowly.
Adjusting the depth
gauge to perform grooving
FIG. F
FIG. G
FIG. G
Ref 801345 – 48 T
Ref 801346 – 60 T
Ref 801347 – 80 T
801345 :
Lama 48 denti
801346:
Lama 60 denti
801347:
Lama 80 denti
Repeat operation for the other
side
FIG. H
Empty the dust bag regularly and before any new work!
Connecting a vacuum cleaner
Description and location of machine parts
FIG. A & B
01 Protection guard
02 Switch
03 Carbon rods
04 Orientation of plate
05 Locking of plate
06 Length stop
07 Clamp| 08 Plate scale
09 Laser
10 Angle of head
11 Adjustment of stop to 45°/90° angles
12 Radial function
13 Table extensions
---|---
Contents of box
FIG. C
Assembling the machine
FIG. D
- Mounting of dust bag
- Mounting of stops and extensions
- Mounting of clamping vices
Machine Functions
FIG. E
01 Unlocking of the machine
02 Orientation of plate
03 Angle of head
04 How to make a cut
05 How to use the radial function| 06 Turning on the laser and LED light
07 Using the length stops
08 Holding a piece you are cutting
09 Groove function
---|---
Machine settings
FIG. F
- Adjusting a cut to 90°
- Adjusting a cut to 45°
- Adjusting the Laser
Replacement of consumables
FIG. G
- Changing the blade
- Changing the carbon rods
Fixation and transport
FIG. H
Maintenance, recommendations and advice
- Do not use mitre saws for cutting firewood
- Do not push too hard on the machine.
- It is better to hook your machine up to a vacuum cleaner in order to collect as much dust as possible
EnergySaw-254SB 132033 925525F| Sliding electric mitre saw|
---|---|---
| Di taglio:| 90×90° = 78×305 mm
90×45° = 78×210 mm
G:45×90° = 78×210 mm
G:45×45° = 42×305 mm
D:45×45° = 23×210 mm
| Nominal frequency and power:| 230 V ~ 50 Hz
| Dimensions lame :| ø 254 mm
| Nominal power:| 1600 W
| Blade hole:| ø 30 mm
| No-load speed:| 4800 min
| | 60 T
| Acoustic pressure level :| 93,5 dB (A)
| Acoustic power level :| 106,5 dB (A)
| Hand/arm vibration level :| 2,091 m / s²
| Laser:| X
---|---|---
| Recyclable, subject to sorting:|
| Wear protective eyewear :
Wear a dust mask :
Wear hearing protective equipment:
wear gloves :| X
| Danger:| X
| Read the instructions before use :| X
| Weight| 17,5 kg
| Insulation class: 2| X
| Conforms to EC standards:| X
****| Subjected to recycling :| X
Waste recycling:
The tools, accessories and their packaging must use an appropriate recycling
channel. In compliance with European Directives 2012/19/UE and 2006/66/CE, a
product’s components must be separated, collected, recycled or eliminated in
accordance with the environmental regulations in force. The appliance,
batteries, oils and packaging must be deposited in the special waste
elimination systems such as the waste collection centres. Ask your commune for
information on the nearest organisation in a position to reprocess or collect
this waste
|
Riciclabile, soggetto a cernita:
| X
---|---|---
EnergySaw-254SB / 132033
DECLARATION OF CE CONFORMITY
The undersigned,
PEUGEOT OUTILLAGE
Tél. : 02 36 16 71 46 – Fax : 02 36 16 71 40
Declares that,
CODE
PEUGEOT / 132033 / EnergySaw-254SB / JF925525F
Complies with the EEC standards:
Machine :| 2006/42/EC 2014/30/EU 2011/65/EU 2015/863/EU
EN 62841-1:2015
EN 62841-3-9:2015 / A11:2017
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1:2021
EN IEC 61000-3-11:2019| ****
SIGMA
Présidente de PEUGEOT OUTILLAGE
Représentée par son Président :
Christophe HUREL
21/04/2023
Fait à St. Pierre-des-Corps
---|---|---
Christophe HUREL
| Purchase date | Machine code | Distributor’s stamp |
|---|
AFTER SALE SERVICE
PEUGEOT OUTILLAGE
Une société du groupe
192, Avenue Yves Farge
37700 St. Pierre-des-Corps
FRANCE
peugeot-outillage.com
132033-4-Manual-F_converted.indd 32
28/09/2023 09:47
PEUGEOT OUTILLAGE – 192, Avenue Yves Farge
– 37700 St. Pierre-des-Corps
– FRANCE – Tél. : 02 36 16 71 46
– Fax : 02 36 16 71 40
Documents / Resources
|
PEUGEOT EnergySaw-254SB Sliding Electric Mitre
Saw
[pdf] User Manual
EnergySaw-254SB Sliding Electric Mitre Saw, EnergySaw-254SB, Sliding Electric
Mitre Saw, Electric Mitre Saw, Mitre Saw
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>