PEUGEOT EnergyBrush-1350 Corded Renovator Instructions
- August 15, 2024
- Peugeot
Table of Contents
- PEUGEOT EnergyBrush-1350 Corded Renovator
- Product Specifications
- Product Usage Instructions
- FAQ
- Description and location of machine parts
- Contents of box
- Machine assembly
- Machine use
- Replacing consumables
- Maintenance and advice
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PEUGEOT EnergyBrush-1350 Corded Renovator
Product Specifications
- Model: EnergyBrush-1350
- Manufacturer: PEUGEOT OUTILLAGE
- Isolation Class: 2
Product Usage Instructions
- Ensure to follow the machine assembly instructions provided in sections D of the manual. It is important to correctly assemble the machine for safe and efficient operation.
- Before any operation, ensure the machine is disconnected from the main power supply.
- Turn the machine on using the ON switch.
- Adjust the speed to either 600 min-1 or 3000 min-1 based on your requirement.
- Refer to section F in the manual for instructions on replacing consumables. Follow the guidelines provided for replacing brushes and other consumables to maintain optimal performance.
- Always move away the power cable from the brush during storage to prevent any damage or accidents. Follow the maintenance recommendations provided to ensure the longevity of the product.
FAQ
- Q: How do I adjust the speed of the machine?
- A: You can adjust the speed by using the speed control switch located on the machine. Choose between 600 min-1 or 3000 min-1 based on your needs.
- Q: When should I replace the consumables?
- A: It is recommended to replace consumables such as brushes when they show signs of wear or if the performance of the machine deteriorates. Refer to section F in the manual for detailed instructions on replacing consumables.
Handboek (Vertaling van het oorspronkelijke)
Description and location of machine parts
Contents of box
Machine assembly
- Before any operation on maintenance of the machine, disconnect it from the mains IMPERATIVELY!
Machine use
Replacing consumables
Repeat the operation for the other side
- Move the spring to the side
- Remove the coal from its housing
- Disconnect the terminal
- Repeat the operations in the opposite direction with the new carbon brush
Maintenance and advice
- Always move away the power cable from the brush during storage
EnergyBrush-1350 150620 S1N-GW-120X100
Buiten renovator
Hand/arm vibration level
- 5,942 m / s2
EnergyBrush-1350
- 150620
DECLARATION OF CE CONFORMITY
PEUGEOT OUTILLAGE
192, Avenue Yves Farge – 37700 St. Pierre-des-Corps – FRANCE Tél. : 02 36 16
71 46 – Fax: 02 36 16 71 40
CODE
PEUGEOT / EnergyBrush-1350 / 150620 / S1N-GW-120X100
WARRANTY
-
Scope of the warranty :
The warranty shall only apply to manufacturing defects or material defects.
We are obliged to exchange or repair parts that are identified as being unusable -
Lifetime warranty :
The warranty shall be valid for 36 months from the delivery date of the equipment to the user (invoice or till receipt must be provided).
Exchanges or repairs carried out under the warranty shall not extend the original warranty period.
The user shall be responsible for the original shipping charges. -
Reservations :
The warranty shall not under any circumstances cover repairs carried out by a non-authorized repairer.
The equipment should not be dismantled under any circumstances during the warranty period.
- Purchase date
- Machine Code
- Distributor’s stamp
AFTER-SALE SERVICE
PEUGEOT OUTILLAGE – 192, Avenue Yves Farge – 37700 St. Pierre-des-Corps – FRANCE – Tél. : 02 36 16 71 46 – Fax : 02 36 16 71 40
- 192, Avenue Yves Farge
- 37700 St. Pierre-des-Corps
- FRANCE
- peugeot-outillage.com