LOGICDATA 49319 Iclassic Family Handset Instruction Manual

LOGICDATA 49319 Iclassic Family Handset

GENERAL INFORMATION

• Documentation for the CBIclassic Family Handset consists of this Operating Manual and several other documents (Other applicable documents, page 5).
• Assembly personnel must read all documentation before starting assembly.
• Keep all documentation for as long as the product is in your possession.
• Ensure that all documentation is provided to subsequent owners.
• Go to www.logicdata.net for more information and support.
• This Manual may change without notice.
• The most recent version is available on our website.

OTHER APPLICABLE DOCUMENTS
This Operating Manual contains assembly and operation instructions for the CBIclassic Family Handset. Other applicable documents include:

• Datasheet for CBIclassic Handset
• Datasheet and Operating Manual for the Control Box in the Table System

COPYRIGHT
© September 2023 by LOGICDATA Electronic und Software Entwicklungs GmbH. All rights reserved, except for those listed in Chapter 1.3 Royalty-free use of images and text.

ROYALTY-FREE USE OF IMAGES AND TEXT
After purchase and full payment of the product, all text and images in Chapter 2 “Safety”, may be used free of charge by the customer for 10 years after delivery. They should be used to prepare end-user documentation for Height- Adjustable Table Systems. The license does not include logos, designs, and page layout elements belonging to LOGICDATA. The Reseller may make any necessary changes to the text and images to adapt them for end-user documentation. Texts and images may not be sold in their current state and may not be published or sublicensed digitally. The transfer of this license to third parties without permission from LOGICDATA is excluded. Full ownership and copyright of the text and graphics remain with LOGICDATA. Texts and graphics are offered in their current state without warranty or promise of any kind. Contact LOGICDATA to obtain text or images in an editable format (documentation@logicdata.net).

TRADEMARKS
Documentation may include the representation of registered trademarks of goods or services, as well as information about copyright or other proprietary expertise of LOGICDATA or third parties. In all cases, all rights remain exclusively with the respective copyright holder. LOGICDATA® is a registered trademark of LOGICDATA Electronic & Software GmbH in the USA, the European Union, and other countries.

SAFETY

TARGET AUDIENCE
This Operating Manual is intended for Skilled Persons only. Refer to Chapter 2.8 Skilled Persons on page 9 to ensure that personnel meet all requirements.

GENERAL SAFETY REGULATIONS
In general, the following safety regulations and obligations apply when handling the product:

• Do not operate the product unless it is in a clean and perfect condition
• Do not remove, change, bridge, or bypass any protection, safety, or monitoring equipment
• Do not convert or modify any components without written approval from LOGICDATA
• In the event of malfunction or damage, faulty components must be replaced immediately
• Unauthorized repairs are prohibited
• Do not attempt to replace hardware unless the product is in a de-energized state
• Only Skilled Persons are allowed to work with CBIclassic Family handsets
• Ensure that national worker protection conditions and national safety and accident prevention regulations are observed during the operation of the system

INTENDED USE

The products in the CBIclassic Family Handset are for electrically Height- Adjustable Tables. They are installed by Resellers into Height-Adjustable Table systems. They are used to control Height-Adjustable Table systems via a Control Box. They are intended for indoor use only. They may only be installed in compatible Height-Adjustable Table Systems and with LOGICDATA-approved accessories. Contact LOGICDATA for further details. Use beyond or outside the intended use will void the product’s warranty.

REASONABLY FORESEEABLE MISUSE
Usage outside of the intended use may lead to minor injury, serious injury, or even death. Reasonably foreseeable misuse of the Handset includes, but does not extend to:

• Connecting unauthorized parts to the product. If you are unsure as to whether a part can be used with a Handset, contact LOGICDATA for further information

EXPLANATION OF SYMBOLS AND SIGNAL WORDS
Safety Notices contain both symbols and signal words. The signal word indicates the severity of the hazard.

• DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
• WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE Indicates a situation which, if not avoided, could result in damage to the product through electrostatic discharge (ESD).
• NOTICE Indicates a situation that will not lead to personal injury, but could lead to damage to the device or the environment.
• INFO Indicates the protection class of the device: Protection Class III.
• Protection Class III devices may only be connected to SELV or PELV power sources.
• INFO Indicates important tips for handling the product.

LIABILITY
LOGICDATA products comply with all currently applicable health and safety regulations. However, risk can result from incorrect operation or misuse. LOGICDATA is not liable for damage or injury caused by:

• Improper product use
• Disregard of the documentation
• Unauthorized product alterations
• Improper work on and with the product
• Operation of damaged products
• Wear parts
• Improperly performed repairs
• Unauthorized changes to the operating parameters
• Disasters, external influence, and force majeure

The information in this Operating Manual describes the characteristics of the product without assurances. Resellers assume responsibility for the LOGICDATA products installed in their applications. They must ensure their product complies with all relevant directives, standards, and laws. LOGICDATA shall not be held liable for any damage that is directly or indirectly caused by the delivery or use of this document. Resellers must observe the relevant safety standards and guidelines for each product in the Table System.

RESIDUAL RISKS
Residual risks are the risks that remain after all relevant safety standards have been complied with. These have been evaluated in the form of a risk assessment. Residual risks associated with the installation of the CBIclassic Family handsets are listed here and throughout this Operating Manual. The risks associated with the system as a whole are listed in the System Manual. See also Chapter 1.1 Other Applicable Documents on page 5. The symbols and signal words used in this Operating Manual are listed in Chapter 2.5 Explanation of Symbols and Signal Words.

WARNING Risk of death or serious injury through electric shocks CBIclassic Family handsets are electrical devices. Although you will not have to connect the Handsets to the Control Box during assembly, basic safety precautions must be taken at all times. Failure to observe electrical safety precautions may lead to death or serious injury through electric shocks.

• Never open the Handset
• Do not convert or modify the Handset in any way
• Do not immerse the Handset or its components in liquid. Clean only with a dry or slightly damp cloth
• Do not place the Cable of the Handset on heated surfaces
• Check the housing and cables of the Handset for visible damage. Do not install or operate damaged products

WARNING Risk of death or serious injury through electric shocks
The CBIclassic Family handsets are Protection Class III devices. They may only be supplied with safety extra-low voltage (SELV). Supplying the CBIclassic Family handsets with the incorrect voltage may lead to death or serious injury through electric shocks.

• Only supply the CBIclassic Family handset with safety extra-low voltage (SELV)
• Refer to the datasheet for information on the permissible supply voltage

WARNING Risk of death or serious injury in explosive atmospheres
Operating the Handset in potentially explosive atmospheres may lead to death or serious injury through explosions.

• Do not operate the Handset in potentially explosive atmospheres

CAUTION Risk of minor or moderate injury through tripping
During the assembly process, you may have to step over Cables. Tripping over Cables may lead to minor or moderate injury.

• Ensure that the assembly area is kept clear of unnecessary obstructions
• Be careful not to trip over Cables

CAUTION Risk of minor or moderate injury through crushing
If any Handset Key becomes stuck while the system is in motion, the system may not stop properly. This may lead to minor or moderate injury through crushing.

• Disconnect the system immediately if any Handset Key becomes stuck

SKILLED PERSONS
CBIclassic Family handsets may only be installed by Skilled Persons. A Skilled Person is defined as someone who:

• Has read and understood all documentation relevant to the Handset

NOTES FOR RESELLERS
Resellers are companies that purchase LOGICDATA products for installation in their products.

INFO For reasons of EU conformity and product safety, Resellers should provide end users with an Operating Manual in their native EU official language
INFO The Charter of the French Language (La charte de la langue française) or Bill 101 (Loi 101) guarantees the right of the population of Quebec to conduct business and commercial activities in French. The bill applies to all products sold and used in Quebec. For table systems that will be sold or used in Quebec, Resellers must provide all product-relevant texts in French. These include but are not limited to

• Operating Manuals
• All other product documentation, including datasheets
• Inscriptions on the product (such as labels), including those on product packaging
• Warranty certificates

The French inscription may be accompanied by a translation or translations, but no inscription in another language may be given greater prominence than that in French.

INFO Operating Manuals must include all the safety instructions that end users require to handle the product safely. They must also include an instruction to always keep the Operating Manual near the product.
INFO No unauthorized persons (young children, persons under the influence of medications, etc.) should be allowed to handle the product.
INFO Resellers must perform a risk assessment on their product that covers residual hazards.
It must include measures to mitigate risk or reference the product‘s Operating Manual.

SCOPE OF DELIVERY

• The standard scope of delivery for Handsets in the CBIclassic Family consists of the Handset, its preattached cable (and 3 mounting screws only in case CBIclassic C).
• All other components necessary for installing the Handset must be supplied separately by the reseller.

UNPACKAGING

To unpackage the product

1. Remove all components from the packaging
2. Check the contents of the package for completeness and damage
3. Provide the Operating Manual to the operating personnel
4. Dispose of the packaging material

NOTICE Dispose of the packaging material in an environmentally friendly manner. Remember to separate plastic parts from the cardboard packaging.
NOTICE Ensure proper ESD handling during unpackaging. Damage that can be attributed to electrostatic discharge will void warranty claims.

PRODUCT

The CBIclassic Family of Handsets consists of two products: CBIclassic B and CBIclassic C. In general, the operation and assembly of both handsets are similar with some differences that will be pointed out within this manual further on.

KEY PRODUCT FEATURES
CBICLASSIC B

1. Mounting Points
2. UP / DOWN Keys

CBICLASSIC C

1. Memory Position Keys
2. Mounting Points
3. UP / DOWN Keys
4. SAVE Key
5. Display
6. Mounting Plate (for sliding mechanism)

ABOUT THE SLIDING MECHANISM

• The Sliding Mechanism is a feature of CBIclassic C that allows the handset to be stowed under the table, during transportation or when it is not being used.
• To move to the retracted position: Push the handset inwards toward the table top until it clicks into place.
• To move to the extended position: Pull the handset outwards until it clicks into place.

DIMENSIONS

CBICLASSIC B

Length| 50.0 mm | 1.967”
---|---
Width| 59.9 mm | 2.358”
Height (to the underside of Table Top)| 17.3 mm | 0.681”

CBICLASSIC C

Length| 69.5 mm | 2.736”
---|---
Width| 137.2 mm | 5.404”
Height (to the underside of Table Top)| 24.7 mm | 0.974”

DRILLING TEMPLATE

CBICLASSIC B

• There are two variants for mounting. In the Standard Position, the drilled holes should be 8 mm from the front edge of the Table Top and 43.8 mm apart.
• Alternatively, the drilled holes can be set to the Transportation Position, 24 mm from the front edge of the Table Top and 43.8 mm apart. The Transportation Position allows the CBIclassic B to be slid backwards underneath the Table Top, so that the Handset does not protrude from the front edge of the table when in transport.
• The Side Edge of the CBIclassic B does not have to be flush with the Table‘s Side Edge. Leave a minimum of 20 mm between the outer hole and the Side Edge to ensure the CBIclassic B does not protrude from the side.

CBICLASSIC C
When placing the drilling holes, it must be ensured that the Handset does not protrude from the front edge of the Table Top while in the retracted position. To ensure the correct position:

• The two drilling holes at the front of the plate must be 31.5 mm from the front edge of the table.
• The two drilling holes must be placed in a line parallel to the front edge of the table and 46 mm apart.
• The single drilling hole at the back of the plate must be 45.5 mm from the front edge of the table.
• The centre of the single drilling hole must be 23 mm from the width of each of the two front holes.

The Side Edge of the CBIclassic C handset does not have to be flush with the Table‘s Side Edge. To avoid protrusion over the side edge, leave a gap of at least 70 mm from the central hole to the side edge of the table.

ASSEMBLY

This chapter describes the process of installing the CBIclassic Family handset into the Height-Adjustable Table System.

SAFETY DURING ASSEMBLY

WARNING Risk of death or serious injury through electric shocks
CBIclassic Family handsets are electrical devices. Basic safety precautions must be taken at all times. Failure to observe electrical safety precautions may lead to death or serious injury through electric shocks.

• Never open the Handset
• Ensure that the Handset is not connected to the Control Box during assembly
• Do not convert or modify the Handset in any way
• Check the housing and cables of the Handset for visible damage. Do not install or operate damaged products.

CAUTION Risk of minor or moderate injury through improper handling
Improper handling of the product during assembly may lead to minor or moderate injury through cutting, pinching, and crushing.

• Avoid contact with sharp edges
• Be careful while handling tools that may cause personal injury
• Ensure assembly complies with the generally accepted standards and guidelines of electrical engineering and furniture manufacturing
• Read all instructions and safety advice carefully

CAUTION Risk of minor or moderate injury through tripping
During assembly and operation, poorly routed Cables may become a trip hazard.
Tripping over Cables may lead to minor or moderate injury.

• Ensure that Cables are routed properly to avoid trip hazards
• Be careful not to trip over Cables when installing the Handset

NOTICE Ensure proper ESD handling during assembly. Damage that can be attributed to electrostatic discharge will void warranty claims.
NOTICE To avoid damage to the product, measure the dimensions of the Handset before assembly.
NOTICE Before assembly, all parts must be acclimatised to the ambient conditions.
NOTICE Do not lift the Handset by its cable. This will cause irreparable damage to the product.
INFO Perform a product risk assessment so that you can respond to potential residual hazards.
Assembly instructions must be included in your end-user Operating Manual.

REQUIRED COMPONENTS

(for CBIclassic B supplied by Reseller)

Tool| Drill or Drilling Machine
Tool| Screwdriver

INFO Screw specifications for CBIclassic B
The mounting points have a width of 4.3 mm. The Mounting Screws should hold the Handset safely and securely in place. Exact specifications can be provided by LOGICDATA on request.
INFO Screw Specifications for CBIclassic C
The Mounting Screws are provided by LOGICDATA with the Handset. These are 16 mm in length, with a 3 mm thread and 8 mm head diameter.

PROCESS

NOTICE CBIclassic C handset is equipped with a sliding mechanism and should always be mounted in the retracted position.

1. Place the Handset into the rails of the sliding plate (applicable only for CBIclassic C).
2. Position the Handset in the desired position under the table top and mark the position of the Mounting Points. For CBIclassic C ensure that the Handset is in the retracted position and does not protrude from the edge of the Table Top.
3. Drill the holes for the Mounting Screws into the Table Top at the marked points.
4. Use the screwdriver and Mounting Screws to attach the Handset to the Table Top at the drilled holes.

NOTICE The required tightening torque depends on the material of the Table Top. Do not exceed 2 Nm.

COMPLETING ASSEMBLY
After the CBIclassic Family handset is attached to the Table Top, you must connect the Cable to the Control Box. Refer to the manual for your chosen Control Box for instructions.

OPERATION

CAUTION Risk of minor or moderate injury through uncontrolled movement The table may not always stop exactly at the expected position. Failure to anticipate the table‘s movements may lead to minor or moderate injury through crushing.

• Wait until the system has completely stopped before attempting to use the table

CAUTION Risk of minor or moderate injury through crushing Failure to release Handset Keys correctly may result in the table failing to stop properly.
This may lead to minor or moderate injury through crushing.

• Do not slide your finger to a different Handset key while another button is pressed
• Disconnect the system immediately if any Handset Key becomes stuck

This section of the Operating Manual contains a selection of instructions for operating the Table System to which the CBIclassic Family Handset is connected. CBIclassic Family Handsets are compatible with a large number of LOGICDATA Control Boxes. Before using the Table System, you must also read the Operating Manual for the installed Control Box, including all relevant safety information, in full.
Handset Keys are represented as follows for further description:

ADJUSTING THE TABLE TOP HEIGHT

CAUTION Risk of minor or moderate injury through crushing Your fingers may be crushed when you attempt to change the height of the table.

• Keep fingers away from moving parts
• Ensure that no persons or objects are in the table‘s range of motion

INFO The Table Top will move up or down until the UP or DOWN Key is released, or if a predefined stopping point has been reached.

To move the Table Top UP

SAVING A MEMORY POSITION (CBICLASSIC C ONLY)
This function saves a set Table Top position. One Memory Position can be saved per Memory Position Key.

ADJUSTING THE TABLE TO A MEMORY POSITION (CBICLASSIC C ONLY)
Version A (without double-click function)

Version B (Auto-Movement with double-click function)
INFO The double-click function is available only for Table Systems sold in US markets.
INFO If you press any Key while the table moves to a Memory Position, the Table Top will stop moving immediately. To continue, you must select the Memory Position again.
WARNING Risk of minor or moderate injury through unauthorized modifications
The control system firmware is supplied in Europe with the double-click function disabled.
After enabling this functionality the safety of the end product must be evaluated.

• A risk assessment to demonstrate conformity to the requirements of Machinery Directive 2006/42/EC is required before use.
• LOGICDATA is not liable for injuries or damage caused by activating the double-click function

ADDITIONAL INFORMATION

SOFTWARE-DEPENDENT FUNCTIONS

• A full list of Software-Dependent Functions can be found in the Manual of the installed Control Box.

DISASSEMBLY

• To disassemble the CBIclassic Family handset, disconnect the Control Box from the mains. Then, follow the assembly instructions in reverse order.

MAINTENANCE

All CBIclassic Family Handsets are maintenance-free for their entire service lifetime.
WARNING Risk of death or serious injury through electric shocks and other hazards Using a Handset alongside unauthorized spare or accessory parts may lead to death or serious injury through electric shocks and other hazards.

• Only use accessory parts produced or approved by LOGICDATA
• Only use replacement parts produced or approved by LOGICDATA
• Only allow Skilled Persons to perform repairs or install accessory parts
• Contact customer services immediately if the system malfunctions

The use of unauthorized spare or accessory parts may cause system damage. Warranty claims are void in this scenario.

CLEANING

1. Disconnect the Control Box from the mains.
2. Wait 30 seconds for the residual voltage to dissipate.
3. Wipe the Handset with a dry or slightly damp soft cloth. Never immerse the Handset in liquid.
4. Wait for the Handset to dry completely.
5. Reconnect the Control Box.

REPLACING A HANDSET

1. Disconnect the Control Box from the Mains.
2. Disconnect the Handset from the Control Box.
3. Remove the Handset from the Table Top.
4. Mount the new Handset onto the Table Top.
5. Plug the Handset back into the Control Box.
6. Reconnect the Control Box to the Mains.

TROUBLESHOOTING

Usually, malfunctions occur when Handsets are pressed while calibrating. If the Handset fails to function, you will need to restart the system. To do this:

1. Unplug the Handset from the Control Box.
2. Plug the Handset back into the Control Box.
3. After a few seconds, the Handset is ready for operation.

A list of common problems and their solutions can be found in the Manual of the installed Control Box.

DISPOSAL
Dispose of all components separately from household waste. Use designated collection points or disposal companies authorized for this purpose

CONTACT

LOGICDATA

• Electronic & Software Entwicklungs GmbH
• Wirtschaftspark 18
• 8530 Deutschlandsberg
• Austria
• Phone: +43 (0)3462 5198 0
• Fax: +43 (0)3462 5198 1030
• E-mail: office.at@logicdata.net
• Internet: http://www.logicdata.net

LOGICDATA North America, Inc.

• 13617 Woodlawn Hills Dr.
• Cedar Springs, MI 49319
• USA
• Phone: +1 (616) 328 8841
• E-mail: office.na@logicdata.net
• www.logicdata.net

References

• LOGICDATA | Mechatronic Solutions for Every Industry LOGICDATA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>