Zhejiang Okai Vehicle ZK115M GPS Tracker User Manual
- June 6, 2024
- Zhejiang Okai Vehicle
Table of Contents
Zhejiang Okai Vehicle ZK115M GPS Tracker User Manual
Introduction
The ZK115M is a water-resistant GPS tracker designed for scooter. its built-in GPS receiver has superior sensitivity and fast time to first fix (TTFF). Its LTE allows the ZK10M’s location to be monitored in real time or periodically tracked by a backend server or other specified terminals. its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. It has built-in high brightness color indicator and audio broadcast function. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, low battery and scheduled GPS position.
Product Overview
Specifications
General Specifications
Dimensions(LWH)
| 1953771(mm)
---|---
External Battery Voltage
| 3.65V
Waterproof|
IP65
Operating Temperature|
‐20℃ ~ +60℃
Network Specifications
No.
| Item| Parameters
---|---|---
1| Antenna| Internal only
2| Frequency|
LTE Cat M1: B2/B4/B5/B12/B13/B25/B26/B66/B85 LTE Cat NB2:
| | B2/B4/B5/B12/B13/B25/B66/B71/B85 GSM:GSM850/GSM1900
---|---|---
3| GSM Features|
GPRS:
Max. 107Kbps (DL), Max. 85.6Kbps (UL)
EGPRS: Max. 296Kbps (DL), Max. 236.8Kbps (UL)
4
| LTE Features| Support LTE Cat.M1 and LTE Cat.NB2 Cat.M1: Max. 588kbps (DL)/1119kbps (UL)
Cat.NB2: Max.127kbps (DL)/158.5kbps (UL)
5| Transmit Mode|
TCP, UDP, SMS
GPS Specifications
No.
| Item| Parameters
---|---|---
1
| Antenna| Internal only
2| Sensitivity|
Tracking & Navigation ‐164 dBm Reacquisition ‐160 dBm
Cold start ‐148 dBm
Hot start ‐157 dBm
3| Position accuracy (CEP, 50%, 24H Static, ‐130 dBm, > 6 SVs)|
2.5M
4
| TTFF(Open Sky)|
Cold start: 28s average Auxiliary start : <5s
Hot start : 1s average
BLE Specifications
No.
| Item| Parameters
---|---|---
1
| Antenna| Internal only
2| Frequency|
2.4GHz RF transceiver compatible with Bluetooth low Energy (BLE)
3
| Sensitivity|
Excellent receiver sensitivity ‐88dBm
4| Max out RF Power|
-7.54 dBm
NFC Specifications
No.
| Item|
Parameters
---|---|---
1
| Antenna| Internal only
2| Frequency|
13.56 MHz. Full NFC controller solution
Other Specifications
No.
| Item|
Parameters
---|---|---
1
| MCU| Core: Cortex – M4
Flash memory: 1024K bytes Ram: 256k bytes Frequency: Up to 100MHz
2
| G‐Sensor| Model type: 3D accelerometer
acceleration range: ±2/±4/±8/±16g
3
| Timing Report| Report position and status at pre‐set intervals
4| Motion Detection|
Motion alarm based on internal 3‐axis accelerometer
5
| Audio Codec|
I2S/PCM serial data port
24‐bit, 8 to 96 kHz sampling frequency 95 dB signal to noise ratio, ‐85 dB
THD+N
1.25W@8Ω/5V or 1.8W@4Ω/4.2V mono class D speaker driver
Interface Description
5‐pin Connector Interface
Pin No. | Pin Name | Description |
---|---|---|
1 | GND | Power GND (Black) |
2 | CAN‐ON | Control signal output (Blue) |
3 | CAN‐H | CAN Bus H Line (Green) |
4 | CAN‐L | CAN Bus L Line (Yellow) |
5 | DC IN: 12V | Power+ Input (Red) |
4‐Pin Connector Interface
Pin No. | Pin Name | Description |
---|---|---|
1 | OUT_3V | Voltage output pin: 3.0V, 150mA (Red) |
2 | UART RX | UART debug port (Orange) |
3 | UART TX | UART debug port (Brown) |
4 | GND | GND (Gray) |
User Instructions
-
Installing SIM Card
-
Turn off ZK115M.
-
Open ZK115M and insert SIM card as follows.
-
Installing ZK115M to the Scooter
Connect the 5‐pin interface to the scooter, and then it will be powered on and can communicate with the scooter. ZK115M can report the position and status of the scooter to the backend server and the backend sever can send commands to ZK115M to transfer to scooter to control the behavior of the scooter also. -
Communicating with Backend Server
After installing SIM card and powered on, ZK115M can communicate with the backend server through network, and transfer reports of emergency, Geo‐fencing, device status and scheduled GPS position etc. It is easy for service provider to set up their tracking platform based on the functional wireless tracking protocol -
Debugging
Users can use the 4‐pin interface to give commands to the device locally for the purpose of testing and debugging.
BLE
-
BLE working modeexplanation
ZK115M isinstalled in the SharedScooter and supplied by the main battery of Scooter. With the external power(main battery of Scooter) supplying , the BLE of ZK115M works. Otherwise with the backup battery of ZK115M supplying, BLE stops working. -
BLE instructions
Heartbeat packet uploaded from ZK115M to Server includes 20 bytes dynamic password (BLE Command Password).After successfully connected with the BLE of ZK115M,It is able to send command <AT+BKSCT=BLE Command Password,0$> to unlock Scooter or <AT+BKSCT=BLE Command Password,1$>to lock Scooter by BLE channel. -
NFC function can be set enable or disable through command. It need enable before applying NFC function.
-
Enable/Disable NFC function
Command to enable NFC:AT+GTVAD=ZK115,0,0,0, 1 ,,,,FFFF$ Command to disable NFC:AT+GTVAD=ZK115,0,0,0, 0 ,,,,FFFF$ -
NFC Instructions
After ZK115M NFC function enabled, it is able to take NFC tool to send command <AT+BKSCT=BLE Command Password,0$>to unlock Scooter or <AT+BKSCT=BLE Command Password,1$> to lock Scooter by NFC channel.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Documents / Resources
|
Zhejiang Okai Vehicle ZK115M GPS
Tracker
[pdf] User Manual
ZK115M, 2AYF8-ZK115M, 2AYF8ZK115M, ZK115M GPS Tracker, GPS Tracker
---|---