Crutchfield 120CHRYSAV CHRYSAV Rear Seat Video Adapter Owner’s Manual
- June 1, 2024
- CRUTCHFIELD
Table of Contents
Crutchfield 120CHRYSAV CHRYSAV Rear Seat Video Adapter
Product Specifications
- Product Name: Chrysler RSE Retention Harness 2008-up
- Designed for: Chrysler, Dodge, Jeep, RAM, Volkswagen vehicles
- Compatibility: See applications list below
Product Usage Instructions
Introduction
The CHRYSAV is designed to provide an audio/video input to the factory
overhead video screen from the aftermarket radio.
Applications
Compatible with the following vehicles:
- Chrysler Aspen Town & Country: 2008-2009
- Dodge Durango Grand Caravan Journey Ram 1500 Ram 2500/3500: 2008-2017
- Jeep Grand Cherokee: 2008-2013
- RAM 1500/2500/3500: 2009-2013
- VOLKSWAGEN Routan: 2012
Installation Instructions
For detailed installation instructions, please visit
AxxessInterfaces.com.
Connections
Follow the provided wiring diagram to correctly connect the CHRYSAV to your
aftermarket radio and the factory overhead video screen.
Frequently Asked Questions (FAQ)
-
Q: Is the CHRYSAV compatible with all Chrysler vehicles?
A: No, the CHRYSAV is specifically designed for select Chrysler, Dodge, Jeep, RAM, and Volkswagen models as listed in the applications section. -
Q: Can I install the CHRYSAV without professional help?
A: While installation instructions are provided, it is recommended to seek professional installation to ensure proper connection and functionality. -
Q: Does the CHRYSAV come with a warranty?
A: Warranty information can be obtained from the retailer or by contacting the manufacturer directly.
Chrysler RSE Retention Harness 2008-up
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle specific applications
INTRODUCTION
The CHRYSAV is designed to provide an audio/video input to the factory overhead video screen from the aftermarket radio.
- The CHRYSAV is designed to work with the overhead video monitors that do not have the DVD player built in.
- This harness must be used along with an Axxess interface.
Note: For models with a 3rd row RSE, only the 2nd row RSE will function.
APPLICATIONS
INTERFACE COMPONENTS
- CHRYSAV harness
TOOLS REQUIRED
- Crimping tool and connectors, or solder gun, solder, and heat shrink
- Tape
- Wire cutter
- Zip ties
- Small flat-blade screwdriver
CONNECTIONS
- Connect the “A/V 1” RCA jacks to the aftermarket radios audio/video output.
- Connect Yellow to video-out, Red to right audio-out, and White to left audio-out.
- Disregard the “A/V 2” RCA jacks, they will not be used in this application.
- Connect the Yellow RCA jack labeled “BACKUP” to the aftermarket radios backup camera input.
- Connect the (3) loose Black wires to chassis ground.
Note : When programming the Axxess interface, ensure that the rear seat entertainment screen is fully closed.
Integrate • AxxessInterfaces.com
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/4/19
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>