YHS5020 YI Camera IP 1080p User Manual
- June 15, 2024
- YI
Table of Contents
Thank you for choosing the Y! Dome Camera U
What’s in the box
Getting to Know Your Camera
Pairing your Camera
a) Powering on the Camera
Place the camera close to the router, and make sure Wi-Fi access is available,
then connect the cable to the Power Port on the back of the camera to power
the outlet as shown.
The light indicator will flash yellow and you will hear the introductory
messages “Welcome to YI Home Camera”, followed by “Waiting to Connect”.
b) Connecting to the Yl Home App
Step 1
Download the Yl Home App and register a Yl Home account.
Step 2
- Ensure that your cell phone is connected to your local 2.4GHz Wi-Fi network.
- Enable the “Location” function on your phone.
- Authorize the “Location” function of the Yl Home App.
Step 3
Log-in into your Yl Home App, tap the “+” symbol in the top-right, select
the “Yl Dome Camera U” and then tap the “| heard ‘Waiting to connect” button.
Step 4
Enter your Wi-Fi network password and tap the “Connect to Wi-Fi” button.
AQR code will appear on your phone’s screen. Point the QR code towards the
camera lens until you hear the following messages “QR code scan is successful,
connecting to Wi-Fi” and “Wi-Fi is connected”.
Step 5
Tap the “Next” button. You will hear the message “Pairing is successful,
you can start using your camera now” both from the camera and from the app.
Assign your desired name to the camera and tap the buttons “Save” and “You may
start using your camera now”.
Your YI Dome Camera U is now ready to use.
c) Pan/Tilt/Zoom (PTZ) Angle
Range of Activity:
Pan 0° – 350°, tilt up 53°, tilt down 10°.
Zoom
Directly from the livefeed on your Yl Home App
Wall Mounting Diagram (optional)
Use the screws to install the wall mount on a flat wall/ ceiling. Install the camera onto the wall mount.
Connect the power cable to the camera and switch it on. The camera will automatically connect the last configured Wi-Fi network.
Switching Wi-Fi Networks
When you need to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:
- Restore your camera to its default settings by inserting a paper clip or reset pin into the camera’s Reset Port.
- Open the YI Home app on your phone, and connect the camera to your phone again. Your videos stored on your MicroSD card will not be affected.
Important Safety Guidelines
- Read these instructions carefully.
- Clean only with a dry cloth.
- This camera is for indoor use only.
- Only use the attachments/ accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- To get the best usage out of this product, please consistently update to the latest versions of our app and firmware.
Go to: https://Avww.yitechnology.com/firmware/
Specifications
- Maximum Resolution: 1920 x 1080
- Lens: Wide-Angle
- Audio: Built-in Mic and Speaker
- Photographic Enhancement: 3D Digital Noise Reduction, Distortion Correction
- Wi-Fi: 802. 11b/g/n, 2.4 G Hz
- Alert Modes: Human Detection, Motion Detection, Face Detection
- Night Vision: IR Cut+ Non-invasive Infrared LEDs
- Support Platforms: Android, iOS, Mac & PC
- Wireless Encryption: WEP/WPA/WPA2
- USB Cable Length: 2 Meters
- Power Supply: DC 5V/1A
- Power Consumption: 3.5W
- Pan/Tilt: 350° horizontally, tilt up 53°, tilt down 10°.
- Storage: MicroSD Card and YI Cloud Storage
- Operating Temperature: 14°F to 122°F
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The distance between user and products should be no less than 20cm This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio ommunications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC WARNING
This device contains licence-exempt transmitter(s Vreceiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device
The distance between user and products should be no less than 20cm
Hereby we: Shanghai Xiaoyi Technology Co., Ltd. declares that the radio
equipment: YHS.5020 is in compliance with Directive 2014/53/EU.
Product Type: YHS.5020
Wi-Fi: 2.4GHz ,802.11 b/g/n
Max RF power. 17dBm
Manufacturer: Shanghai Xiaoyi Technology Co., Ltd.
Address: Building 18, NO.55 Chuanhe Road, Pudong New District, Shanghai, China
The full text of the EU declaration of conformity is available at the
following internet address:
https://kamistore.eu/pages/product-certification
FCC ID: 2AFIB-YHS5020
IC: 20436-YHS5020
References
- Kami Community - Official Kami Community. Ask questions, get answers and connect with your fellow Kami users.
- YI Technology
- YI Technology