STARLEAD 50 x 70 cm Bathroom Mirror with LED Lights Instructions
- June 15, 2024
- STARLEAD
Table of Contents
STARLEAD 50 x 70 cm Bathroom Mirror with LED Lights
Product information
Technical Information
- Size: 70x50cm
- Input: 220V
- Power: 45W
- Ra: >80
- LED: SMD2835/258PCS
- Lumens: 900lm
- CCT: 6500K/3000K/4000K
Kit’s Coming with the Mirror
- Expansion tube: 3+1
- Screw: 3+1
- Junction box: 1
Tools needed for installation
- Pencil
- Screwdriver
- Rubber Mallets
- Electric drill
- Tape measure
Installation Steps
- Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
- Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the screws into the plastic anchors.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
For LED lights
The mirror is equipped with 3 touch-sensor switches. When the installation is
finished and the power is connected, the touch sensor light will be on. It can
be turned off by a long press when the mirror light is off.
- One-click on the first touch sensor for light on/off.
- Quick clicks off for color temperature changing.
- Long press for dimming.
For Demister Pad
The second touch sensor is for the demister pad. Before having a shower, turn
it on. When you finish the shower, the demister pad area will be clear without
any fog. Turn it off before leaving.
For Bluetooth speakers
The third touch sensor is for the Bluetooth speaker. When the power is
connected, it will have a reminder voice indicating that it is ready for
connecting. Open the Bluetooth function on your mobile phone and find a signal
called “mirror multimedia”. Click and connect, then you can play music from
your phone and the music will come from the speakers at the backside of the
mirror. Turn it off when it is not in use to avoid accidental connections from
neighbors.
Child reminder
Bluetooth is connectable to one device only. If you want to connect a second
device, please forget the first device.
FAQ
-
Q: Can I install the mirror vertically and horizontally?
A: Yes, both vertical and horizontal installations are valid. -
Q: What is the input voltage for the mirror?
A: The input voltage is 220V. -
Q: How many touch sensor switches does the mirror have?
A: The mirror is equipped with 3 touch sensor switches. -
Q: How do I change the color temperature of the LED light?
A: Quick clicks on off on the first touch sensor for color temperature changes. -
Q: Can I connect multiple devices to the Bluetooth speaker?
A: No, Bluetooth is connectable to one device only. If you want to connect a second device, please forget the first device.
MANUFACTURER SPECIALIZED IN : LED wall-mounted vanity mirror, LED full- length mirror, LED mirror cabinet
Technical information
Both vertical & horizontal installations are valid
- Size: 70x50cm
- Input: 220V
- Power: 45W
- Ra: >80
- LED: SMD2835/258PCS
- Lumen:900lm
- CCT: 6500K/3000K/4000K
Kits coming with the mirror
Tools needed for installation
Installation steps
- Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
- Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
- Connect the wall power cord to the wires behind the mirror through the junction box
- Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
The mirror is equipped with 3 touch sensor switches, when installation is finished and power is connected, the touch sensor light will be on, it can be turned off by long press when the mirror light is off.
For LED Light
The first touch sensor is for the LED light, one clicks for light on/off,
quick clicks on-off-on for color temperature changing, long press for dimming.
For Demister Pad
The second touch sensor is for the demister pad, before having a shower we can
turn it on, and when we finish the shower, the demister pad area will be clear
without any fog. Turn if off before leaving.
For Bluetooth Speaker
The third touch sensor is for the Bluetooth speaker, when the power is
connected, it will have a reminder voice means that it is ready for
connecting. Open the Bluetooth function from the mobile phone, we can find a
signal called mirror multimedia. Click and connect then we can play music from
the phone and the music will come from the speaker’s backside of the mirror.
Turn it off when it is free, and avoid the neighbor connect it by accident.
Kind reminder
Bluetooth is connectable to one device only. If you want to connect the second device, please foget the first device.
Warning
- Disconnect from outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
- Do not use outdoors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>