STARLEAD LED Backlit Bathroom Bluetooth Mirror Instruction Manual

June 16, 2024
STARLEAD

STARLEAD LED Backlit Bathroom Bluetooth Mirror Instruction Manual
STARLEAD LED Backlit Bathroom Bluetooth Mirror

Technical information

Technical information

  • Both vertical&horizontal installation are valid.

    • Size: 90x60cm
    • Input: 220V
    • Power: 50W
    • Ra: >80
    • LED: SMD2835/282PCS
    • Lumen: 1000lm
    • CCT: 6500K/3000K/4000K

Kits coming with the mirror

  • Expansion Tube 3+1

  • Screw 3+1

  • Junction Box 1

Tools needed for installation

  • **Pencil

**

  • Screw Driver

  • Rubber Mallet

  • **Electric Drill

**

  • Tape Measure
    Tools Required

Installation steps

  1. Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall
    Installation

  2. Use a hammer to drive the pastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.

  3. Connect the wall power cord to the wires behind the mirror through the junction box.
    Installation

  4. Align brackets behind the mirror with the screws on the wall and hang it, installation is completed
    Installation

Instructions for use

The mirror is equipped with 3 touch sensor switch, when installation finished and power connected, the touch sensor light will be on, it can be turned off by long press when the mirror light is off.

For LED Light
First touch sensor is for the LED light, one click for light on/off, quick clicks on-off-on for color temperature changing, long press for dimming

For Demister Pad
Second touch sensor is for the demister pad, before having a shower we can turn it on, when we finish the shower, the demister pad area would be clear without any fog. Turn if off before leaving

For Bluetooth Speaker
Third touch sensor is for the bluetooth speaker, when the power connected, it will have a reminder voice means that it is ready for connecting. Open bluetooth function from the mobile phone, we can find a signal called mirror multimedia. Click and connect then we can play music from the phone and the music will come from the speakers backside of the mirror. Turn it off when it is free, avoid the neighbour connect it by accident.

Kind reminder

Bluetooth is connectable to one device only. If you want to connect the second device, please foget the first device.

Warning

  1. Disconnect from outlet before putting on or taking off parts.
  2. Close supervision is necessary when this mirror is used by, or near children.
  3. Keep the cord away from heated surfaces.
  4. Make sure that the electricity is turned off at the power source before proceeding with the installation.
  5. Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
  6. Do not use outdoors

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals