STARLEAD 70x100cm LED Mirror User Manual
- June 16, 2024
- STARLEAD
Table of Contents
STARLEAD 70x100cm LED Mirror
Specifications
- Product: LED Mirror
- Manufacturer: TARLEAD STAR B LED wall mounted vanity mirror, LED full length mirror, LED S D L mirror cabinet
- Size: 100x70cm
- Input: 220V
- Power: 65W
- Ra: >80
- LED: SMD2835/378PCS
- Lumen: 1100lm
- CCT: 6500K/3000K/4000K
Installation Steps
- Measure the distance between the two brackets A on the back of the mirror and use a level to mark the same distance on the wall.
- Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the screws into the plastic anchors.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for Use
The mirror is equipped with 3 touch sensor switches:
- LED Light: First touch sensor is for the LED light. One click for light on/off, quick clicks on-off-on for color temperature changing, long press for dimming.
- Demister Pad: Second touch sensor is for the demister pad. Before having a shower, turn it on. When finished, the demister pad area will be clear without any fog. Turn it off before leaving.
- Bluetooth Speaker: Third touch sensor is for the Bluetooth speaker. When the power is connected, it will have a reminder voice indicating that it is ready for connecting. Open the Bluetooth function on your mobile phone, find a signal called “mirror multimedia,” click and connect. You can play music from your phone and the sound will come from the speakers at the backside of the mirror. Turn it off when not in use to avoid accidental connections by neighbors.
Kind Reminder
Bluetooth is connectable to one device only. If you want to connect a
second device, please forget the first device.
Warning
- Disconnect from outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords before moving, testing, or repairing the product.
- Do not use outdoors.
MANUFACTURER SPECIALIZED IN
LED wall mounted vanity mirror, LED full length mirror, LED mirror cabinet
Technical information
Both vertical&horizontal installation are valid.
- Size: 100x70cm
- Input: 220V
- Power: 65W
- Ra: >80
- LED: SMD2835/378PCS
- Lumen: 1100lm
- CCT: 6500K/3000K/4000K
Kits coming with the mirro
Tools needed for installation
Installation steps
- Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
- Use a hammer to drive the pastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
The mirror is equipped with 3 touch sensor switch, when installation finished and power connected, the touch sensor light will be on, it can be turned off by long press when the mirror light is off.
For LED Light
First touch sensor is for the LED light, one click for light on/off, quick
clicks on-off-on for color temperature changing, long press for dimming
For Demister Pad
Second touch sensor is for the demister pad, before having a shower we can
turn it on, when we finish the shower, the demister pad area would be clear
without any fog. Turn if off before leaving.
For Bluetooth Speaker
Third touch sensor is for the bluetooth speaker, when the power connected, it
will have a reminder voice means that it is ready for connecting. Open
bluetooth function from the mobile phone, we can find a signal called mirror
multimedia. Click and connect then we can play music from the phone and the
music will come from the speakers backside of the mirror. Turn it off when it
is free, avoid the neighbour connect it by accident.
Kind reminder
Bluetooth is connectable to one device only. If you want to connect the
second device, please foget the first device
Warning
- Disconnect from outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceedingwith the installation.
- Always unplug all the power supply cords from before moving the product, testingthe product, or repairing the product.
- Do not use outdoors.
FAQ
- Can I use the mirror outdoors?
- No, the mirror should not be used outdoors.
- How do I change the color temperature of the LED light?
- Quickly click the touch sensor switch on-off-on to change the color temperature of the LED light.
- How do I connect the Bluetooth speaker to my phone?
- When the power is connected, the Bluetooth speaker will have a reminder voice indicating that it is ready for connecting. Open the Bluetooth function on your mobile phone, find a signal called “mirror multimedia,” click and connect.
- Can I connect multiple devices to the Bluetooth speaker?
- No, the Bluetooth speaker is connectable to one device only. If you want to connect a second device, please forget the first device.