ITC 81TS1000, 81TR1000 Series Surfit Table Leg Installation Guide
- June 3, 2024
- ITC
Table of Contents
ITC 81TS1000, 81TR1000 Series Surfit Table
PARTS/TOOLS NEEDED:
- Table Base
- Floor Base
- Table Leg
- Power Drill (Not Provided)
-
10 Phillips Oval Head Screws (Not Provided)
- 2.5”/3.25” Hole Saw Bit
(Not Provided)
IMPORTANT SAFETY INSTRUCTIONS.
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
Mounting
- Drill hole in the floor making sure the base will be mount-ed into solid floor structure (wood, fiberglass, etc.) Using #10 Phillips oval head screws attach the base to the floor. 2.50” Diameter Hole – aluminum base (81TR1000-X)
- 3.25” Diameter Hole – polymer base (TR1000HPPR-B) 2. Mount the table base into table top (customer provided) using #10 phillips oval head screws. Make sure the weight of the table top is evenly supported over the table leg. 3. Insert the table leg into the hole in the base. To remove the leg, rotate and pull straight up to remove completely.
For warranty information please visit www.itc-us.com/warranty-return- policy Rev Level 3 • 11/15/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>