Bestway 58619 Soothing LED Pool Waterfall Owner’s Manual

June 16, 2024
Bestway

Bestway 58619 Soothing LED Pool Waterfall Owner’s Manual
Bestway 58619 Soothing LED Pool Waterfall

Assembly

Assembly Instructions

Installation

Installation Instructions
Installation Instructions

Adjusting the Position

Adjusting Position

Please read and keep these instructions carefully before using it.

WARNING
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Use only under competent supervision.

Battery Precaution

  • Do not mix old and new batteries.
  • Do not mix the different types of batteries. Do not mix alkaline, standard (Carbon – Zinc), or rechargeable (Nickel – Cadmium) batteries.
  • Ensure batteries are installed correctly with regard to polarity (+ and -).
  • Do not short-circuit the battery.
  • Never attempt to recharge primary batteries as this may cause leakage, fire, or explosion.
  • Rechargeable batteries are to be removed from this product before being charged.
  • Rechargeable batteries are only to be charged under adult supervision.
  • Never attempt to disassemble or open batteries as this can lead to electrolyte burns.
  • Remove batteries from equipment which is not to be used for an extended period of time.
  • Exhausted batteries are to be removed from this product.
  • Do not dispose of product and its batteries in fire. Check your local regulations for proper disposal instructions.
  • Batteries shall not be exposed to excessive heat such as sunshine, fire or the similar.
  • Only use AA batteries (not included).

Technical Specification

Item NO.| Name| Voltage| Rate| IP Grade| Battery| Compatibility
---|---|---|---|---|---|---
58619| Soothing LED Waterfall| DC 4.5 V| 0.5 W| IP 67| 3 X AA (Not Included)| 530-3000 gal. pump

Parts Instructions

No. Description QTY
1 Shower nozzle 1
2 LED 1
3 Gasket seal 2
4 Nuts 2
5 Fixed part 1
6 Screws 2
7 Adaptors for φ32 mm hose 1
8 Seal ring 1

Important: For setup or in case of maintenance

Maintenance

  1. Turn the filtration system off, then turn off or block the water valve.
    Warning: Please check whether the seal rings have been fixed on the connection to the water hose.
    Important: Perform the air purge operation for the filtration system after the first setup and after any maintenance. For more details, refer to the filtration system instruction manual.

  2. Lighting function: The waterfall is equipped with LED lights.

    • Press the power button and the LED light turns on with 7 colors alternating.
    • Press the power button again, the LED will be locked in one color.
    • Every time press the power button, the light of the color will be changed and locked.
    • Long press the power button, LED light turns off (2 hours auto power-off feature on the product)

Maintenance and Storage

  1. Store in a dry place when not in use.
  2. Please remove the batteries if not in use for a long time.
  3. Use a dry cloth to clean the product.
  4. Do not drop the product or it may break

DISPOSAL

Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Bestway Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals